MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I Engine oil (250 hp Petrol 4G63 Turbo)
Recommended part replacement interval for your car for the part category Engine oil: every 15.000 km / every 12 months
- Version: SAE 10
- Oil Viscosity Classification SAE: SAE 10
- Capacity [litre]: 4
- Product line: FLUSHOIL
- Universal: Yes
- Type: engine flush
- Packing Type: Canister
- Item number: PM0990-4
- Our price: 15,27 €
- Manufacturer: PEMCO
- EAN number: 4036021454047
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Version: SAE 10
- Capacity [litre]: 10
- Packing Type: Canister
- Oil Viscosity Classification SAE: SAE 10
- Universal: Yes
- Type: engine flush
- Product line: FLUSHOIL
- Item number: PM0990-10
- Our price: 19,57 €
- Manufacturer: PEMCO
- EAN number: PM0990-10
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Version: SAE 10
- Oil Viscosity Classification SAE: SAE 10W
- Capacity [litre]: 20
- Product line: FLUSHOIL
- Universal: Yes
- Type: engine flush
- Packing Type: Canister
- Item number: PM0990-20
- Our price: 48,95 €
- Manufacturer: PEMCO
- EAN number: PM0990-20
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Version: SAE 10
- Capacity [litre]: 60
- Packing Type: Barrel
- Product line: FLUSHOIL
- Oil Viscosity Classification SAE: SAE 10
- Universal: Yes
- Type: engine flush
- Item number: PM0990-60
- Our price: 128,19 €
- Manufacturer: PEMCO
- EAN number: 4036021170060
- Condition: New
price incl. 19% VAT
- Version: SAE 10
- Capacity [litre]: 208
- Packing Type: Barrel
- Product line: FLUSHOIL
- Oil Viscosity Classification SAE: SAE 10
- Universal: Yes
- Type: engine flush
- Item number: PM0990-DR
- Our price: 387,17 €
- Manufacturer: PEMCO
- EAN number: 4036021180069
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 41
- Centering Diameter [mm]: 90
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 8,4
- Drilled: no
- Item number: BDC4634
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583634
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Thickness [mm]: 14,7
- Quantity Unit: Axle Set
- Height [mm]: 37,6
- Width [mm]: 99
- WVA Number: 21872
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474705
- Observe technical data
- Item number: 0 986 424 464
- Our price: 23,41 €
- Manufacturer: BOSCH
- EAN number: 3165143659199
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Surface: Oiled
- Centering Diameter [mm]: 69
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Drilled: no
- Item number: 0 986 479 140
- Manufacturer: BOSCH
- EAN number: 4047024241305
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 14,9
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 46
- Width [mm]: 108
- WVA Number: 23373, 23374, 23375
- Test Mark: R90 Homologated
- Weight [kg]: 1,011
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 10,8
- Packaging height [cm]: 4,4
- Customs tariff number: 87083091
- Item number: FDB1507
- Our price: 36,81 €
- Manufacturer: FERODO
- EAN number: 5016687231472
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Sumitomo
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 15
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 50
- Width [mm]: 115
- Test Mark: R90 Homologated
- Weight [kg]: 1,5
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 10,6
- Packaging height [cm]: 4,4
- Item number: FDB759
- Our price: 19,68 €
- Manufacturer: FERODO
- EAN number: 5016687047172
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 60,3
- Surface: Oiled
- Centering Diameter [mm]: 90
- Number of Holes: 5
- Minimum thickness [mm]: 18,4
- Drilled: no
- Item number: BG9849
- Manufacturer: DELPHI
- EAN number: 5012759359761
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 69
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 22,4
- Drilled: no
- Item number: BDC5160
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866553
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,6
- Centering Diameter [mm]: 69
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 22,4
- Drilled: no
- Item number: BDC5448
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438157376
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,5
- Centering Diameter [mm]: 69
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- Rim Size [inch]: 16.0
- Brake Disc Hub Height [mm]: 21,7
- Packaging width [cm]: 30
- Packaging height [cm]: 10
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V22-80008
- Manufacturer: VAICO
- EAN number: 4046001550430
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Thickness [mm]: 15,7
- Quantity Unit: Axle Set
- Height [mm]: 58,4
- Width [mm]: 149,7
- WVA Number: 21363
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Manufacturer Restriction: AKEBONO System
- Article number of recommended accessories: 1987474231, 1987474377, 1987474325, 1987474232
- Observe technical data
- Item number: 0 986 424 523
- Our price: 26,60 €
- Manufacturer: BOSCH
- EAN number: 3165143723722
- Condition: New

- Fitting Position: Rear Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 45,7
- Width [mm]: 108
- Warning Contact Length [mm]: 32
- Item number: BP1163
- Our price: 29,01 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593659537
- Condition: New
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 14
- Quantity Unit: Axle Set
- Height [mm]: 44,2
- Width [mm]: 98
- Item number: BP513
- Our price: 42,43 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593183087
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 52,6
- Width [mm]: 128
- Warning Contact Length [mm]: 33
- Item number: BP697
- Our price: 38,42 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593330634
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 58,8
- Width [mm]: 150
- Warning Contact Length [mm]: 35
- Item number: BP739
- Our price: 38,42 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593318038
- Condition: New
- Fitting Position: Front Axle
- Brake System: Akebono
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 58,7
- Width [mm]: 149,8
- WVA Number: 21363
- Test Mark: R90 Homologated
- Weight [kg]: 1,718
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 17
- Packaging width [cm]: 9,8
- Packaging height [cm]: 6,4
- Item number: FDB1993
- Our price: 29,40 €
- Manufacturer: FERODO
- EAN number: 4044197391943
- Condition: New
How much oil is required for the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp?
To change oil in the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp, you'll need L of motor oil.
Oils with which OEM approvals are recommended for the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp?
For the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp, the manufacturer recommends using engine oils with the following approvals:
Which motor oil viscosity grades are recommended for the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp?
For the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp, the carmaker recommends using engine oils of the following grades:
Which engine oil specifications are recommended for the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp?
For the MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp, the manufacturer recommends using engine oils with the following specifications:
What motor oil should I choose for my MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp?
Our top-rated products that suit MITSUBISHI Lancer V Saloon (CB_A, CD_A, CE_A) EVO I (CD9A) Petrol 250 hp best are:
MITSUBISHI recommends oil change intervals of 15,000 km or 12 months for the LANCER CB_A, CD_A, CE_A EVO I (CD9A) Petrol.
Outside of these intervals, an oil change may also be necessary if the dashboard oil light comes on.