DYNAMAX Engine oil

Suitable for all petrol and diesel engines of passenger cars requiring oil, which meets the VW 504.00 and 507.00 specification (prolonged exchange interval 30 000 km. Suitable for vehicles with DPF filters, catalytic converters and EGR technology. KINEMATIC VISCOSITY AT 100 °C : 11,8 mm2/s VISCOSITY INDEX : 160

Universal year-round engine oil designed for the lubrication of all old petrol and four-stroke engines. It is particular ly suitable for older types of cars LADA and Dacia. KINEMATIC VISCOSITY AT 100 °C : 15,1 mm2/s VISCOSITY INDEX : 130

Dynamax TURBO PLUS is suitable for almost all types of petro l and diesel four-stroke engines also naturally aspirated an d turbocharged, including engines with catalytic converter. KINEMATIC VISCOSITY AT 100 °C : 15,1 mm2/s VISCOSITY INDEX : 120

It is a new generation of engine oil type SHPD (Super High P erformance Diesel Oil) recommended for heavy-duty diesel eng ines with turbocharging and naturally aspirated, with improv ed properties for active piston cleaning. Suitable for mixed carriage stock of large trucks, buses and construction equi pment. Meets emission standards EURO 2 and EURO 3. KINEMATIC VISCOSITY AT 100 °C : 14,1 mm2/s VISCOSITY INDEX : 145

Universal motor oil produced on the synthetic technology des igned to lubricate petrol and diesel engines with direct inj ection with or without supercharging. KINEMATIC VISCOSITY AT 100 °C : 14,1 mm2/s VISCOSITY INDEX : 155

Universal motor oil produced on the synthetic technology des igned to lubricate petrol and diesel engines with direct inj ection with or without supercharging. KINEMATIC VISCOSITY AT 100 °C : 14,1 mm2/s VISCOSITY INDEX : 155

High performance low emission synthetic motor oil. It extend s engine life and the life of equipment for treatment of exh aust gases, which are in use in the latest generation of pet rol and diesel engines in cars. It is suitable for vehicles with diesel particulate filters (DPF). KINEMATIC VISCOSITY AT 100 °C : 12,9 mm2/s VISCOSITY INDEX : 175

Ultra high performance synthetic diesel motor oil based on 1 00% synthetic technology with low content of ash, phosphorus and sulfur (SAPS). Has been specifically designed for engin es with diesel particulate filters (DPF) or with equipment f or subsequent treatment of exhaust gases SCR (selective cata lytic reduction). Meets emission standards EURO 4, EURO 5 an d EURO 6. KINEMATIC VISCOSITY AT 100 °C : 14,5 mm2/s VISCOSITY INDEX : 145

High- quality semi-synthetic oil recommended for high-perfor mance two-stroke air-cooled petrol engines. It is suitable f or direct oil injection system, as well as oil lubricating s ystems with pre-mixed composition. It has excellent miscibil ity with petrol, forming a homogeneous and stable mixture ev en at low ambient temperature. Protects a piston against abr asion and engine components against premature wear. KINEMATIC VISCOSITY AT 100 °C : 9,5 mm2/s VISCOSITY INDEX : 135

High- quality motor oil produced on mineral base, containing additives suppressing sediments in piston grooves as well a s the additives improving the lubricating oilability. It is suitablefor both direct oil injection as well as for lubrica ting systems with premixed composition. KINEMATIC VISCOSITY AT 100 °C : 9,2 mm2/s VISCOSITY INDEX : 115

Motor oil for all-season lubrication of highly loaded twostr oke engines. It has excellent anti-wear properties, thereby significantly extending the engine life. It is suitable for both direct oil injection as well as lubricating systems wit h premixed composition. KINEMATIC VISCOSITY AT 100 °C : 11,0 mm2/s VISCOSITY INDEX : 95

High-performance semi-synthetic motor oil recommended for ai r-cooled four-stroke engines. Provides ideal protection of a n engine, gearbox and wet clutches in very hard operating co nditions. Eliminates clutch slipping and improves driveabili ty. KINEMATIC VISCOSITY AT 100 °C : 14,5 mm2/s VISCOSITY INDEX : 160

Modern engine oil made of specially selected synthetic base oils and carefully selected balanced additives. It has been specifically developed for lubrication of gasoline and diese l Ford engines with or without turbocharging. KINEMATIC VISCOSITY AT 100 °C : 9,66 mm2/s VISCOSITY INDEX : 168

Suitable for all petrol and diesel engines of passenger cars requiring oil, which meets the VW 504.00 and 507.00 specification (prolonged exchange interval 30 000 km. Suitable for vehicles with DPF filters, catalytic converters and EGR technology. KINEMATIC VISCOSITY AT 100 °C : 11,8 mm2/s VISCOSITY INDEX : 160

High performance low emission synthetic motor oil. It extend s engine life and the life of equipment for treatment of exh aust gases, which are in use in the latest generation of pet rol and diesel engines in cars. It is suitable for vehicles with diesel particulate filters (DPF). KINEMATIC VISCOSITY AT 100 °C : 12,9 mm2/s VISCOSITY INDEX : 175

Universal motor oil produced on the synthetic technology des igned to lubricate petrol and diesel engines with direct inj ection with or without supercharging. KINEMATIC VISCOSITY AT 100 °C : 14,1 mm2/s VISCOSITY INDEX : 155

Dynamax TURBO PLUS is suitable for almost all types of petro l and diesel four-stroke engines also naturally aspirated an d turbocharged, including engines with catalytic converter. KINEMATIC VISCOSITY AT 100 °C : 15,1 mm2/s VISCOSITY INDEX : 120