KS TOOLS Torque wrench

Tool cabinet with 7 drawers and 207 tools •7 ball bearing drawer with 100% pull-out and capacity of 35 kg

•Enormous stability due to individual fastening of each drawer

•400 kg total load capacity

•Unpacking - immediately ready to use



The high-quality powder-coated professional tool cabinet is always there just when it’s needed! Spending all day running back and forth is a thing of the past. With help from the ergonomic push handle integrated into the plastic tray, it’s quite easy to manoeuvre through the workshop and protects the edges on the corners from collisions. Thanks to its 2 parking brakes on the swivel castors, it remains in place at its destination. More room! The workshop cabinet has seven drawers. Two drawers are extra high and thus provide plenty of space for drills and other large tools. With the hanging slot on the side, additional storage space can be created with the right brackets. All drawers are supported by ball bearings and pull out 100% even at the maximum capacity of 35 kg. This means that getting to your tools is no problem whatsoever. To make sure your professional tool cabinet does not tip over, all drawers lock individually and can also be secured with the central lock. The professional tool cabinet in detail: Total capacity: W 77 x H 97,5 x D 47 cmDrawer internal dimensions: 5x 52,8 cm x 39,8 cm x 55 mm2x 52,8 x 39,8 x 13,5 cmTotal load capacity: 400 kgLoad capacity of each drawer: 35 kgFull pull-out: YesBall-bearing: YesLocking mechanism: IndividualCentral lock: on the side, 2 keysEdge protection: PlasticCastor: 2 swivel castors, 2 fixed castors

14x18mm Push fit ring spanner (box wrench), 14mm

3/8" Socket, 6mm

Torque angle gauge, 3/4", claw

Combination spanners set, offset, 5 pcs 8-19mm •flank traction profile

•according to DIN 3113 Form A / ISO 3318 / ISO 7738

•jaw 15° offset

•ring head 15° offset

•polished heads

•matt finish

•chrome vanadium

•Replacement glass for welding helmet BT156915

•Clear

•Plastic



The BRILLIANT TOOLS protective glass for welding helmet BT156915-1 serves as a replacement if the protective glass on the welding helmet (BT156915) gets scratched or damaged by flying sparks, and needs to be replaced.

1/2" ERGOTORQUE®precision torque wrench with reversible ratchet head, 20-100Nm

3/8" 12 Point socket, 19/32"

T-handle box wrench, 3/8"

•enables quick pre-fastening of the screw connections

•especially for using in confined spaces

•especially suitable for rapid screw tightening with the T-handle

•it is simply to be used in place of the standard box wrench

•ergonomically shaped T-handle

•square drive adaptor to DIN 3120 / ISO 1174 with ball lock

3/8" Socket, 6mm

9x12mm ERGOTORQUE®precision torque wrench toolkit with retangular tool holder, 10-50Nm, 33 pcs