HAZET Torque wrench

HAZET Sliding square 6414-1 ∙ Square, solid 12.5 mm (1/2 •Sliding square 12.5 = 1⁄2″ Outside square For 5121CT ∙ 5121ST ∙ 5121-1 inch) 5122CT ∙ 5122ST ∙ 5122-1 5123CT ∙ 5123ST ∙ 5123-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Net weight: 0.04 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Sliding square 6413-3 ∙ Square, solid 10 mm (3/8 inch) •Sliding square

∙ Square, solid 10 mm (3/8 inch) •Made in Germany

•Drive: Square, solid 10 mm (3/8 inch)

•Output: Square, solid 10 mm (3/8 inch)

•Dimensions / length: 25 mm

•Net weight: 0.02 kg

HAZET Sliding square 6413-4 ∙ Square, solid 10 mm (3/8 inch) •Sliding square

∙ Square, solid 12.5 mm (1/2 inch) •Made in Germany

•Drive: Square, solid 10 mm (3/8 inch)

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 30.2 mm

•Net weight: 0.03 kg

HAZET Sliding square 5110-01 ∙ Square, solid 10 mm (3/8 •Sliding square with blue knob 10 = 3⁄8″ Outside square For 5110-1CT inch)

•Output: Square, solid 10 mm (3/8 inch)

•Net weight: 0.03 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Sliding square 5121-02 ∙ Square, solid 12.5 mm (1/2 •Sliding square with blue knob 12.5 = 1⁄2″ Outside square For 5121-1CT ∙ 5122-1CT ∙ 5123-1CT inch)

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Net weight: 0.06 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Insert square drives 6414 ∙ Insert square 14 x 18 mm ∙ •Surface: chrome-plated

Square, solid 12.5 mm (1/2 inch) •DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 14 x 18 mm

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 63.5 mm

•Net weight: 0.21 kg

•Inside micrometre of the adjusting tool l2: 25 mm

•Head Thickness a: 18 mm

•Head thickness (a1): 21.5 mm

•Head Width b: 30 mm

HAZET Torque Screwdrivers 6001-1.4/3 ∙ Nm min-max: 0.4 – 1.4 •For all fittings with low torque e.g. disc brakes on bicycles Nm ∙ Tolerance: 15% ∙ Hexagon, hollow 6.3 (1/4 inch) ∙

Number of tools: 3 •For all screw connections with low torque e.g. valve cores on tyre pressure control systems

•For tightening torques from 0.4 to 1.4 Nm

•Torque release clearly palpable and audible when torque setting is reached by ratcheting

•Loosening without torque function possible

•Fast and precise setting of torque values with hex-head wrench (HAZET 2100-06, included in delivery)

•Insert tool holder for bits with magnet for all bits with Outside hexagon 6.3 = 1/4 inch drive or HAZET Adapter 2304 for connecting to Outside square 6.3 = 1/4 inch HAZET 850 sockets

•Accuracy (tolerance) according to EN ISO 6789

•Contents: Torque handle with insert tool holder for bits 2239-7, offset screwdriver 2100-06

•Plastic handle

•Made in Germany

•Output: Hexagon, hollow 6.3 (1/4 inch)

•Net weight: 0.2 kg

•Nm min-max: 0.4 – 1.4 Nm

•Tolerance: 15 %

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

•Number of tools: 3

HAZET Insert adapter 6423C ∙ Insert square 9 x 12 mm ∙ •Amplifier for square insert 9 x 12 → 14 x 18

Insert square 14 x 18 mm •Surface: chrome-plated

•Made in Germany

•Drive: Insert square 9 x 12 mm

•Output: Insert square 14 x 18 mm

•Dimensions / length: 50 mm

•Net weight: 0.12 kg

•Inside micrometre of the adjusting tool l2: 34 mm

•Head Thickness a: 22.9 mm

•Head Width b: 30 mm

HAZET Torque Screwdrivers 6001-3.0/3 ∙ Nm min-max: 1.5 – 3 •For all fittings with low torque e.g. disc brakes on bicycles Nm ∙ Tolerance: 6% ∙ Hexagon, hollow 6.3 (1/4 inch) ∙ Number

of tools: 3 •According to VW Service Information e.g. for the fastening screws at the air-filter housing on 1.4 l engine with turbocharger on VW Eos, Golf, Golf Plus and Passat

•Torque release clearly palpable and audible when torque setting is reached by ratcheting

•Loosening without torque function possible

•Fast and precise setting of torque values with hex-head wrench (HAZET 2100-06, included in delivery)

•Insert tool holder for bits with magnet for all bits with Outside hexagon 6.3 = 1/4 inch drive or HAZET Adapter 2304 for connecting to Outside square 6.3 = 1/4 inch HAZET 850 sockets

•Accuracy (tolerance) according to EN ISO 6789

•Contents: Torque handle with insert tool holder for bits 2239-7, offset screwdriver 2100-06

•Plastic handle

•Made in Germany

•Output: Hexagon, hollow 6.3 (1/4 inch)

•Net weight: 0.17 kg

•Nm min-max: 1.5 – 3 Nm

•Tolerance: 6 %

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

•Number of tools: 3

HAZET Insert reversible ratchet 6401-1 ∙ Insert square 9 x •6401-1 20 teeth ∙ Operating angle 18° – maximum 40 Nm 12 mm ∙ Square, solid 6.3 mm (1/4 inch) 6402-1 30 teeth ∙ Operating angle 12° – maximum 120 Nm 6403-1 32 teeth ∙ Operating angle 11.25° – maximum 120 Nm 6404-1 32 teeth ∙ Operating angle 11.25° – maximum 300 Nm

•Drop forged

•Surface: chrome-plated

•DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 9 x 12 mm

•Output: Square, solid 6.3 mm (1/4 inch)

•Dimensions / length: 46.5 mm

•Net weight: 0.05 kg

•Number of teeth: 20 (Opening angle 18°)

•Inside micrometre of the adjusting tool l2: 19.5 mm

•Head Thickness a: 9.9 mm

•Head Width b: 21.8 mm

HAZET Insert reversible ratchet 6403 ∙ Insert square 9 x 12 •Fine tooth, 72 teeth ∙ Operating angle 5°

mm ∙ Square, solid 12.5 mm (1/2 inch) •Drop forged

•Surface: chrome-plated

•DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 9 x 12 mm

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 58.5 mm

•Net weight: 0.18 kg

•Number of teeth: 72 (Opening angle 5°)

•Inside micrometre of the adjusting tool l2: 26 mm

•Head Thickness a: 14.5 mm

•Head thickness (a1): 22.5 mm

•Head Width b: 34.5 mm

HAZET Repair set for ratchet wheel 6150/8 •Replacement set for ratchet wheel 20 = 3⁄4″ Outside square consisting of: ratchet wheel ∙ pawl ∙ shift lever ∙ screws ∙ ball ∙ compression spring For 6150-1CT ∙ 7250-2 sTAC ∙ 7250-5 sTAC

•Made in Germany

•Net weight: 0.56 kg

•For manual operation

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Insert reversible ratchet 6402-1 ∙ Insert square 9 x •6401-1 20 teeth ∙ Operating angle 18° – maximum 40 Nm 12 mm ∙ Square, solid 10 mm (3/8 inch) 6402-1 30 teeth ∙ Operating angle 12° – maximum 120 Nm 6403-1 32 teeth ∙ Operating angle 11.25° – maximum 120 Nm 6404-1 32 teeth ∙ Operating angle 11.25° – maximum 300 Nm

•Drop forged

•Surface: chrome-plated

•DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 9 x 12 mm

•Output: Square, solid 10 mm (3/8 inch)

•Dimensions / length: 61 mm

•Net weight: 0.14 kg

•Number of teeth: 30 (Opening angle 12°)

•Inside micrometre of the adjusting tool l2: 30 mm

•Head Thickness a: 15 mm

•Head Width b: 30 mm

HAZET Insert reversible ratchet 6404-1 ∙ Insert square 14 x •6401-1 20 teeth ∙ Operating angle 18° – maximum 40 Nm 18 mm ∙ Square, solid 12.5 mm (1/2 inch) 6402-1 30 teeth ∙ Operating angle 12° – maximum 120 Nm 6403-1 32 teeth ∙ Operating angle 11.25° – maximum 120 Nm 6404-1 32 teeth ∙ Operating angle 11.25° – maximum 300 Nm

•Drop forged

•Surface: chrome-plated

•DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 14 x 18 mm

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 83.5 mm

•Net weight: 0.3 kg

•Number of teeth: 32 (Opening angle 11.25°)

•Inside micrometre of the adjusting tool l2: 38.5 mm

•Head Thickness a: 19.6 mm

•Head Width b: 40 mm

HAZET Insert reversible ratchet 6406 ∙ Insert square 14 x 18 •Fine tooth, 72 teeth ∙ Operating angle 5°

mm ∙ Square, solid 20 mm (3/4 inch) •Drop forged

•Surface: chrome-plated

•DIN 3120, ISO 1174-1

•Made in Germany

•Drive: Insert square 14 x 18 mm

•Output: Square, solid 20 mm (3/4 inch)

•Dimensions / length: 101 mm

•Net weight: 0.86 kg

•Number of teeth: 72 (Opening angle 5°)

•Inside micrometre of the adjusting tool l2: 44 mm

•Head Thickness a: 24 mm

•Head thickness (a1): 35.6 mm

•Head Width b: 64 mm

HAZET Torque wrench 5122-3CT ∙ Nm min-max: 40 – 200 Nm ∙ •User-friendly reversible ratchet

Tolerance: 3% ∙ Square, solid 12.5 mm (1/2 inch) •Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 519 mm

•Net weight: 1.17 kg

•Nm min-max: 40 – 200 Nm

•Tolerance: 3 %

•Scale Graduation (Nm): 1 Nm

•Actuating force min.-max. kg: 9.4 – 49.5 kg

•Number of teeth: 32 (Opening angle 11.25°)

•Head Thickness a: 19.6 mm

•Head Width b: 44 mm

•Auto Bild, best in test 2019, HAZET torque wrench 5122-3 CT, issue 32/2019 Auto Bild classic, best in test 2020, HAZET torque wrench 5122-3 CT, handle 6, June 2020

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 5110-3CT ∙ Nm min-max: 10 – 60 Nm ∙ •User-friendly reversible ratchet

Tolerance: 3% ∙ Square, solid 10 mm (3/8 inch) •Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 10 mm (3/8 inch)

•Dimensions / length: 320 mm

•Net weight: 0.47 kg

•Nm min-max: 10 – 60 Nm

•Tolerance: 3 %

•Scale Graduation (Nm): 0.5 Nm

•Actuating force min.-max. kg: 3.9 – 25.0 kg

•Number of teeth: 30 (Opening angle 12°)

•Head Thickness a: 14.5 mm

•Head Width b: 32 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 5120-3CT ∙ Nm min-max: 10 – 60 Nm ∙ •User-friendly reversible ratchet

Tolerance: 3% ∙ Square, solid 12.5 mm (1/2 inch) •Extra short design – particularly compact

•Specifically also for commercial vehicles

•Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 320 mm

•Net weight: 0.49 kg

•Nm min-max: 10 – 60 Nm

•Tolerance: 3 %

•Scale Graduation (Nm): 0.5 Nm

•Actuating force min.-max. kg: 3.9 – 25.0 kg

•Number of teeth: 30 (Opening angle 12°)

•Head Thickness a: 14.5 mm

•Head Width b: 32 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 5108-3CT ∙ Nm min-max: 2.5 – 25 Nm ∙ •User-friendly reversible ratchet

Tolerance: 3% ∙ Square, solid 6.3 mm (1/4 inch) •Perfect for working on motorcycles and bicycles

•Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 6.3 mm (1/4 inch)

•Dimensions / length: 234 mm

•Net weight: 0.41 kg

•Nm min-max: 2.5 – 25 Nm

•Tolerance: 3 %

•Scale Graduation (Nm): 0.25 Nm

•Actuating force min.-max. kg: 1.4 – 15.3 kg

•Number of teeth: 20 (Opening angle 18°)

•Head Thickness a: 10.2 mm

•Head Width b: 24 mm

Mountainbike, best in test 2020, HAZET torque wrench 5108-3 CT, issue 11/2020

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 5107-3CT ∙ Nm min-max: 1 – 9 Nm ∙ •User-friendly reversible ratchet

Tolerance: 4% ∙ Square, solid 6.3 mm (1/4 inch) •Perfect for working on motorcycles, bicycles and tyre pressure control systems

•Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 6.3 mm (1/4 inch)

•Dimensions / length: 234 mm

•Net weight: 0.42 kg

•Nm min-max: 1 – 9 Nm

•Tolerance: 4 %

•Scale Graduation (Nm): 0.1 Nm

•Actuating force min.-max. kg: 0.6 – 5.5 kg

•Number of teeth: 20 (Opening angle 18°)

•Head Thickness a: 10.2 mm

•Head Width b: 24 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required