Torque wrench (200 Nm)

Tool cabinet with 7 drawers and 207 tools •7 ball bearing drawer with 100% pull-out and capacity of 35 kg

•Enormous stability due to individual fastening of each drawer

•400 kg total load capacity

•Unpacking - immediately ready to use



The high-quality powder-coated professional tool cabinet is always there just when it’s needed! Spending all day running back and forth is a thing of the past. With help from the ergonomic push handle integrated into the plastic tray, it’s quite easy to manoeuvre through the workshop and protects the edges on the corners from collisions. Thanks to its 2 parking brakes on the swivel castors, it remains in place at its destination. More room! The workshop cabinet has seven drawers. Two drawers are extra high and thus provide plenty of space for drills and other large tools. With the hanging slot on the side, additional storage space can be created with the right brackets. All drawers are supported by ball bearings and pull out 100% even at the maximum capacity of 35 kg. This means that getting to your tools is no problem whatsoever. To make sure your professional tool cabinet does not tip over, all drawers lock individually and can also be secured with the central lock. The professional tool cabinet in detail: Total capacity: W 77 x H 97,5 x D 47 cmDrawer internal dimensions: 5x 52,8 cm x 39,8 cm x 55 mm2x 52,8 x 39,8 x 13,5 cmTotal load capacity: 400 kgLoad capacity of each drawer: 35 kgFull pull-out: YesBall-bearing: YesLocking mechanism: IndividualCentral lock: on the side, 2 keysEdge protection: PlasticCastor: 2 swivel castors, 2 fixed castors

•Replacement glass for welding helmet BT156915

•Clear

•Plastic



The BRILLIANT TOOLS protective glass for welding helmet BT156915-1 serves as a replacement if the protective glass on the welding helmet (BT156915) gets scratched or damaged by flying sparks, and needs to be replaced.

HAZET Torque wrench 5122-3CT ∙ Nm min-max: 40 – 200 Nm ∙ •User-friendly reversible ratchet

Tolerance: 3% ∙ Square, solid 12.5 mm (1/2 inch) •Accuracy ± 3% of the scale value (in direction of actuation for right-hand tightening) (5107-3 CT ± 4% accuracy of scale value)

•For left-hand tightening, use our torque wrenches with insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)





•Designed for rough workshop use

•Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry

•Optimised sealing ring to protect against debris

•Ratchet repair set for customer-oriented self-assembly enables decades of use

•Handle with better grip for easier power transmission

•Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle

•Safe locking of the setting values by latching function on the rotary assembly

•Rotary assembly in triangular form prevents uncontrolled rolling

•Lock symbols indicate the respective locking status

•Can be attached to the cable loop through openings on the locking rotary assembly

•Easy-to-read, high-contrast scale

•Permanent readability due to laser marking on the scale bush

•Integrated shift lever 5121-3 CT – 5123-3 CT: shift level with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Delivery in sturdy Hexa plastic box

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 519 mm

•Net weight: 1.17 kg

•Nm min-max: 40 – 200 Nm

•Tolerance: 3 %

•Scale Graduation (Nm): 1 Nm

•Actuating force min.-max. kg: 9.4 – 49.5 kg

•Number of teeth: 32 (Opening angle 11.25°)

•Head Thickness a: 19.6 mm

•Head Width b: 44 mm

•Auto Bild, best in test 2019, HAZET torque wrench 5122-3 CT, issue 32/2019 Auto Bild classic, best in test 2020, HAZET torque wrench 5122-3 CT, handle 6, June 2020

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 6292-1CT ∙ Nm min-max: 40 – 200 Nm ∙ •Plug-and-socket connection to hold insert tools

Tolerance: 2% ∙ Insert square 14 x 18 mm •Accuracy ± 2 % of the scale value (in direction of actuation) Can be used for right-hand and left-hand threads by turning the insert tool

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)

•Visual (models with signal transmitter)





•With calibration certificate and serial number

•Easy and safe adjustment of the desired torque value by turning the handle

•Secure storage in safe box with display window

•DIN EN ISO 6789-2:2017

•Made in Germany

•Output: Insert square 14 x 18 mm

•Dimensions / length: 511 mm

•Net weight: 1.05 kg

•Nm min-max: 40 – 200 Nm

•Tolerance: 2 %

•Scale Graduation (Nm): 1 Nm

•Effective torque wrench length min.-max. I1 mm: 478.00 – 455.44 Nm

•Actuating force min.-max. kg: 8.5 – 44.8 kg

•Inside micrometre of the adjusting tool l2: 38.5 mm

•Head Thickness a: 23 mm

•Head Width b: 30 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 6122-1CT ∙ Nm min-max: 40 – 200 Nm ∙ •Accuracy ± 2 % of the scale value (in direction of actuation for right-hand tightening Tolerance: 2% ∙ Square, solid 12.5 mm (1/2 inch) For left-hand tightening, use our torque wrenches with insert tool)

•High-precision premium torque tools – for the highest demands

•Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant

•Secure storage in safe box with display window

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)

•Visual (models with signal transmitter)





•User-friendly reversible ratchet Service-friendly (do-it-yourself repair sets for ratchets available)

•Integrated shift lever

•Easy and safe adjustment of the desired torque value by turning the handle

•Knob for additionally locking the set value

•Ergonomically shaped handle with collar reduces the risk of slipping-off and injury

•Accuracy – fine scale graduation

•6121-1 CT – 6123-1 CT: shift lever with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Surface: hard chrome plated

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 547 mm

•Net weight: 1.32 kg

•Nm min-max: 40 – 200 Nm

•Tolerance: 2 %

•Scale Graduation (Nm): 1 Nm

•Actuating force min.-max. kg: 9.0 – 47.5 kg

•Number of teeth: 90 (Opening angle 4°)

•Head Thickness a: 19.6 mm

•Head Width b: 44 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

HAZET Torque wrench 6122-1CTCAL ∙ Nm min-max: 40 – 200 Nm ∙ •Torque wrench including DAkkS calibration certificate

Tolerance: 2% ∙ Square, solid 12.5 mm (1/2 inch) •Accuracy ± 2 % of the scale value (in direction of actuation for right-hand tightening For left-hand tightening, use our torque wrenches with insert tool)

•High-precision premium torque tools – for the highest demands

•Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant

•Secure storage in safe box with display window

•Safety:

•Haptic (close-gap release)

•Audible (“click” sound)

•Visual (models with signal transmitter)





•User-friendly reversible ratchet Service-friendly (do-it-yourself repair sets for ratchets available)

•Integrated shift lever

•Easy and safe adjustment of the desired torque value by turning the handle

•Knob for additionally locking the set value

•Ergonomically shaped handle with collar reduces the risk of slipping-off and injury

•Accuracy – fine scale graduation

•6121-1 CT – 6123-1 CT: shift lever with idle function – reduces risk of injury and malfunction

•With calibration certificate and serial number

•Surface: hard chrome plated

•DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1

•Made in Germany

•Output: Square, solid 12.5 mm (1/2 inch)

•Dimensions / length: 543 mm

•Nm min-max: 40 – 200 Nm

•Tolerance: 2 %

•Scale Graduation (Nm): 1 Nm

•Actuating force min.-max. kg: 9.0 – 47.5 kg

•Number of teeth: 90 (Opening angle 4°)

•Head Thickness a: 19.6 mm

•Head Width b: 44 mm

•No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required