BGS Torque wrench

- suitable for BGS 312

- suitable for Go-Thru ratchet BGS 9160

- suitable for Go-Thru ratchet BGS 9622

- torque limiter
- the tolerance when using the torsion bar is approx. 10%
if using an impact wrench with 250Nm within 5 seconds

- reversible ratchet with automatic release via click signal
- set torque is locked by stop screw
- adaptor 12.5 mm (1/2?) drive of external square 10 mm (3/8")
- extension bar 12.5 mm (1/2?) drive, length: 125 mm

- ratcheting head, reversible, 48 teeth
- suitable on screws with right-hand thread
- viewing window for torque value
- Resolution: +/- 4%, incl. test certificate
- torque range: 20 - 100 Nm
- Fine scale: 0.5 Nm

- with interchangeable heads
- reversible ratchet head with 6.3 mm (1/4") drive
- 8 open end spanner heads in following sizes: 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm
- 9 x 12 mm square drive for open end heads

- ratcheting head, reversible, 48 teeth
- suitable on screws with right-hand thread
- extra long design, two-piece, easily assembled
- reliable locking with push-button
- viewing window for torque value
- Resolution: +/- 4%, incl. test certificate
- torque range: 200/-1000 Nm
- Fine scale: 2.5 Nm