Ignition coil, Ignition coil unit 2730138020

PLUG TOP COILS Recommendation - Due to operating time and aging, the spark plug connector becomes brittle and thus untight in the sealing area of the spark plug, which may cause misfiring.1. Switch off the ignition. Wait for 15 min before demounting the ignition coil.This prevents voltage peaks that could destroy control devices.2. Remove the defective coil. 3. Apply a thin film of BERU spark plug connector grease ZKF 01(order no. 0 890 300 029) into the inner part of theconnector. 4. Attach the spark plug connector to the coil. 5. Mount the coil with the connector on the spark plug(heed the tightening torque). 6. Check the primary connector contacts for oxidation andclean it, if required.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale.

Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops.

Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list).

Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system.

Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

85mm Mtg. Length See RM-37 for 6-30 Amp Diodes version; M8 Battery Post