Slide hammers

Application: HAZET Impact extractor 1788T-1 For disassembly of tight common rail injectors without removing the cylinder head

•Impact extractor (sliding hammer – sliding weight 200 g) with coupler thread M10

•Removal of caps with inside thread, ball bearings, washers etc.

•To be used with stud bolt set 1788T-1/6 and internal extractors 1788N-15 to 35

•Also together with injector extractor 4797-5

•Made in Germany

•Dimensions / length: 226 mm

•Net weight: 0.39 kg

Universal puller set, 14 pcs •For flushing and changing the oil in dual-clutch (DSG) and automatic gearboxes

•Easy connection to the gearbox oil system of the vehicle by universal adapter set

•Interchangeable new and used oil tanks

•Level indication of the new and used oil tank by means of a scale

•230 V power supply

•Including 35-piece adapter set



The BRILLIANT TOOLS gearbox rinsing device BT626050 cleans and replaces the fluid in the gearbox, torque converter and cooler in only about 20 minutes. When replacing the fluid, the fluid pressure from the ATF cooler and the fluid outlet pressure of the unit are displayed. The different oils remain completely separated inside the device and cannot mix. Both jobs can be done at the same time – a time saving of 50%! The supplied adapter set contains various adapters, for example: Audi, Seat, Skoda, VW, BMW, Peugeot, Land Rover, Ford, Toyota, Mercedes Technical data: Weight: 30 kgCapacity of used oil container: 15 litresCapacity of fresh oil container: 15 litresFlow rate: 50 L/minLength of connection hoses: 2.5 mPressure: 0 – 7 barOperating temperature: +10°C up to +50°CMains voltage: 230 VAC / 50 HzPump capacity: 70 W

Valve thread repair tool •for the repair of damaged threads on external and internal valves

•multi functional including ventalation and removal

Application: HAZET External adapter 4797-3 For disassembly of tight common rail injectors without removing the cylinder head

•External adapter with inside thread M16 x 1.5 on M27 x 1

•Removal of Bosch injectors with outside thread M27 x 1

•In conjunction with impact extractor 4797-1

•Operating mode: The External Adapter must be used when the injector claw cannot be used, either because of the vehicle type or because of the lack of space. Note: after removing the injector with the external adapter, replace the injector

•Made in Germany

•Dimensions / length: 50 mm

•Net weight: 0.16 kg

Application: HAZET Injector claw 4797-2 For disassembly of tight common rail injectors without removing the cylinder head

•Injector claw

•M16 x 1.5

•Made in Germany

•Dimensions / length: 130 mm

•Net weight: 0.44 kg