Wing mirror glass Fiat Punto Mk2 left and right

There is no necessity to remove the mirror casing for replacement of the rear view mirror glass on FIAT PUNTO (188) car. It is sufficient to move it aside from the car body as far as possible, so as to provide maximally comfortable access to the part to be replaced. Sometimes it is more comfortable to perform works from the driver’s or passenger seat, having slightly opened the door and lowered the glass.

During cold season, perform replacement of the rear view mirror glass in well-heated room, as strength of plastic worsens under the influence of low temperature.

Before starting demounting the component on the FIAT PUNTO (188) car, heat up the casing of the component and the mirror element itself, using a heat gun. Thanks to this, plastic will become more elastic, and risk to damage the retainers will be reduced.

In order to gain access to the retainers, you need to move the mirror element aside, by pressing onto one of its corners. Put a suitable tool through appeared opening and release the retainers one after another in a circle.

Use only plastic wedge for releasing the retainers. It is prohibited to use a flat screwdriver (as many do), in order not to scratch the mirror casing and the surface of the mirror element.

Before installing a new part you need to clean the mounting seat from moisture and contaminants, then plug in the connectors, align the retainers, and press onto the mirror element until it clicks into place, by applying a sufficiently great effort.

Wipe stains from the mirror surface on FIAT PUNTO (188) car to ensure good visibility. Poorly cleaned mirrors increase risk of a road accident.

Treat the mirror element with a special hydrophobic spray. Nonwettable film is formed on the mirror's surface after applying it; thus they remain clean even in case of driving at severe rain.

Adjust the mirrors in accordance with recommendations of the FIAT PUNTO (188) car manufacturer. For this, it is necessary to seat into the driver’s seat and lean towards the window. A part of the left car fender should be reflected in the mirror, for about ¼ of the mirror surface area. After this, lean towards the car center: in the passenger side mirror you should be able to see a part of the vehicle right fender.