HAZET Band oil filter wrenches

HAZET Tightening strap 2171-05 •Tightening strap ∙ 396 mm long ∙ for 2171-5

•Net weight: 0.02 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Tightening strap 2171-06 •Tightening strap ∙ 496 mm long ∙ for 2171-6

•Net weight: 0.03 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Belt and rivet for 2170 2170/2 •Replacement set ∙ consisting of: belt and rivet for 2170

•Belt length: 600 mm

•Cotton textile tape ∙ rubber coated ∙ belt height 19.6 mm

•Non-skidding

•Made in Germany

•Net weight: 0.06 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

Application: HAZET Oil filter wrench 2169 ∙ Square, hollow 10 mm (3/8 inch) ∙ Outside 14-point profile ∙ 82 mm Operating oil filters and oil filter housing caps

•For MANN and KNECHT filters ∙ OPEL/VAUXHALL Longlife filters e.g. for MERCEDES-BENZ passenger cars with 2.2 l CDI engine ∙ M 102 ∙ M 103 ∙ M 104 ∙ M 110 ∙ M 111 ∙ M 119 ∙ M 120 ∙ M 613 ∙ Sprinter ∙ 2.2 l Turbo model year 2006 → ∙ diesel engine OM 651 AUDI A4 2.0 model year 2002 → ∙ A4 4-cylinder petrol engines model year 12/2007 → BMW passenger cars ∙ BMW motorcycles ∙ K-models = K 75-1100 LT ∙ Model series F and K VW Passat 1.9 TDI pump injector ∙ Passat B7 1.4 ∙ 1.8 ∙ 2.0 l TSI ∙ Golf Plus 2.0 model year 2005 → ∙ Golf 6 1.6 l and 1.2 / 1.4 / 1.8 / 2.0 l TSI ∙ Golf 7 1.2 - 1.4 l TFSI ∙ Polo 5 1.2 l – 1.4 l TSI ∙ Tiguan model year 2007 → 1.4 l TSI (110 kW) 2.0 l TSI as well as FORD ∙ OPEL/VAUXHALL ∙ PORSCHE ∙ PEUGEOT ∙ CITROËN ∙ RENAULT ∙ NISSAN ∙ TOYOTA ∙ MAZDA etc.

•14-point Wrench size 74.4 mm

•Inside square Drive 10 = 3/8″ or outside hexagon: 27 mm

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch)

•Output: Outside 14-point profile

•Diameter: 82 mm

•Net weight: 0.14 kg

Application: HAZET Oil filter wrench 2169-10 ∙ Square, hollow 10 mm (3/8 inch) ∙ Outside 14-point profile ∙ 82 mm Operating oil filters and oil filter housing caps

•Operating the oil filter housing cap when changing the oil filter element on MAZDA 3 with 2.0 l engine and 6 with 1.8 – 2.0 – 2.3 l engines

•Flat style: continuous 14-point profile up to the edge

•14-point Wrench size 74.4 mm

•Inside square Drive 10 = 3/8″ or outside hexagon: 27 mm

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch)

•Output: Outside 14-point profile

•Diameter: 82 mm

•Net weight: 0.1 kg

Application: HAZET Oil filter wrench 2169-1 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 15-point profile ∙ 102 mm Operation of oil filters (KNECHT and MAHLE filters) 15-point Wrench size 92 mm

•Optionally, Inside square drive 12.5 = 1/2″ or outside hexagon 27 mm

•For e.g. VW ∙ AUDI Passat 1.9 TDi ∙ 2.8 l ∙ CHRYSLER 300 M ∙ PORSCHE ∙ OPEL/VAUXHALL ∙ RENAULT ∙ FORD Focus 1.8 Di model year 08/1999 → ∙ 1.8 TDi model year 10/1998 → ∙ Maverick 2.7 TD ∙ Mondeo 2.5 l ∙ MITSUBISHI ∙ NISSAN ∙ ALFA-ROMEO ∙ HONDA ∙ Volvo ∙ MAN (commercial vehicles) F 2000

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 15-point profile

•Diameter: 102 mm

•Net weight: 0.19 kg

•For manual operation

HAZET Oil service wrench 3703 ∙ Inside square profile ∙ 8 x •For the oil filler and oil drain plug 10 mm gearbox, differential, oil pan on various French passenger cars

•8 and 10 mm outside square

•Surface: chrome-plated

•Made in Germany

•Output: Inside square profile

•Wrench size: 8 x 10 mm

•Dimensions / length: 233 mm

•Net weight: 0.34 kg

Application: HAZET Oil filter wrench 2171-5 ∙ 65 – 105 Operating oil filters even in areas with restricted access

•Adjustable by turning knob or 6-point 13 mm

•Replaceable steel strip (12 x 1 mm)

•Diameter (min-max): 65 – 105 mm

•Net weight: 0.21 kg

Application: HAZET Oil filter wrench 2169-8A ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 15-point profile ∙ 105 mm Operating oil filters and oil filter housings

•15-point Wrench size 74 mm

•Operation of oil filters FORD models e.g. EcoBoost engines among others B-Max ∙ C-Max 2 ∙ Fiesta 5-6-7 ∙ Focus 2-3 ∙ Fusion ∙ Galaxy ∙ Mondeo 4-5 ∙ Tourneo ∙ Transit, Ka+ ∙ Kuga 2 ∙ S-Max MAZDA 2 (DL, DJ) 1.5D ∙ 3 (BK, BL) 2.0 (BM, BN) 1.5D - 2.2D (BP) 1.8D ∙ 5 (CW) 1.8-2.0 ∙ 6 (GG) 1.8-2.0 (GY, GH) 1.8-2.0-2.5 (GJ, GL) 2.2D ∙ CX-3 (DK ) 1.5D-1.8D ∙ CX-5 (KE,GH,KF) 2.2D ∙ CX-7 (ER) 2.3D-2.5D ∙ MX-5 (NC) 1.8-2.0

•Positive mounting of the oil filter housing

•Required torque-controlled screw tightening is possible

•Inside square Drive 12.5 = 1⁄2″

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 15-point profile

•Diameter: 105 mm

Application: HAZET Oil filter wrench 2171-6 ∙ 105 – 145 Operating oil filters even in areas with restricted access

•Adjustable by turning knob or 6-point 13 mm

•Replaceable steel strip (12 x 1 mm)

•Diameter (min-max): 105 – 145 mm

•Net weight: 0.32 kg

Application: HAZET Oil filter wrench 2169-9 ∙ Outside hexagon 24 mm, Operation of oil filters e.g. from MANN as well as Square, hollow 12.5 mm (1/2 inch) ∙ Outside 15-point profile MAHLE/KNECHT ∙ 119

•Drive: Outside 6-point Wrench size 24 mm / Inside square drive 12.5 1⁄2″

•Output: 15-point Wrench size 105 mm

•For e.g.: Volvo ∙ SCANIA ∙ RENAULT ∙ MAN ∙ IVECO ∙ FIAT ∙ FODEN ∙ IRISBUS ∙ ASTRA ∙ CATERPILLAR ∙ LIEBHERR ∙ JOHN DEERE ∙ KOMATSU ∙ FAUN ∙ MITSUBISHI

•The torque value recommended by the vehicle manufacturer can be safely achieved, e.g. with a HAZET torque wrench (Attention: observe the manufacturer's tightening torque value)

•Made in Germany

•Drive: Outside hexagon 24 mm, Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 15-point profile

•Diameter (min-max): 119 mm

Application: HAZET Oil filter wrench 2169-76 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Groove profile ∙ 85 mm Operating Purflux oil filters

•Wrench size 76 mm groove profile (6 grooves)

•For e.g. AUDI A3 ∙ A4 ∙ A6 ∙ CITROËN C5 ∙ Xantia ∙ DACIA ∙ FIAT Brava ∙ Bravo ∙ Punto ∙ Tipo ∙ FORD Fiesta ∙ Escort ∙ MERCEDES-BENZ passenger cars and Sprinter ∙ e.g. Citan 1.5 l Diesel ∙ A-Class ∙ B-Class ∙ PEUGEOT 106 ∙ 206 ∙ 306 ∙ 406 ∙ RENAULT Clio ∙ Kangoo ∙ Mégane ∙ Laguna ∙ Rapid ∙ HONDA Accord ∙ Civic ∙ Prelude ∙ CRX ∙ OPEL/VAUXHALL Astra G/F ∙ Corsa A/B ∙ Calibra ∙ Zafira ∙ Frontera ∙ SUZUKI Grand Vitara 1.9D model year 2009 VW Golf 3 and 4 ∙ Polo ∙ Passat ∙ Sharan ∙ SEAT Alhambra ∙ Toledo ∙ León ∙ Córdoba ∙ ŠKODA Octavia for fuel filters e.g. for RENAULT Espace ∙ Laguna ∙ R19 ∙ Volvo S 40 and V 40 model year → 1999

•Inside square 12.5 = 1/2″ or outside hexagon Hexagon with bore 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Groove profile

•Diameter: 85 mm

•Net weight: 0.21 kg

Application: HAZET Oil filter wrench 2169-6 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 16-point profile ∙ 97 mm Operating oil filters and oil filter housings made of plastic

•16-point Wrench size 86 mm

•For e.g. BMW 316i Limousine Touring ∙ 316ti Compact ∙ 318Ci convertible ∙ Coupé ∙ 318i Limousine Touring ∙ Compact model year 2001 → ∙ 1-series (E87): 116i ∙ 118i ∙ 120i ∙ 130i

•Volvo V40 ∙ V70 ∙ S40 ∙ S60 ∙ S70 ∙ S80

•Inside square Drive 12.5 = 1/2″ or outside hexagon: 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 16-point profile

•Diameter: 97 mm

•Net weight: 0.29 kg

Application: HAZET Oil filter wrench 2169-32 ∙ Square, hollow 10 mm (3/8 inch) ∙ Outside hexagon profile ∙ 43 mm Installing and removing oil filters and oil filter housing caps when changing the oil filter element

•Forged design

•6-point Wrench size 32 mm OPEL/VAUXHALL Astra ∙ Corsa ∙ 1.9 l CDTi ∙ Astra 2.0 CDTi VW Passat ∙ Golf 6 with 1.6 and 2.0 CR-TDI ∙ Passat B7 1.6 ∙ 2.0 diesel engine ∙ Golf 7 2.0 petrol engine ∙ Polo 5 1.2 l-1.4 l TDI ∙ Polo 1.2 l petrol engines model year 2005→ ∙ Transporter T5 1.9 l diesel model year 2004→ ∙ Touran TDi ∙ Tiguan model year 2007→ 1.4 l (90/118kW) 2.0 l diesel engines ∙ AUDI A6 3.2 l TSI ∙ V6 model year 2004→ ∙ A4 diesel from model year 12/2007 BMW 530d M57 model year 2008→ For urea solution filter Ad-Blue® MAN e.g. TGX

•Surface: chrome-plated

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch)

•Output: Outside hexagon profile

•Diameter: 43 mm

•Net weight: 0.14 kg

•For manual operation

Application: HAZET Oil filter wrench 2169-36 ∙ Square, hollow 10 mm (3/8 inch) ∙ Outside hexagon profile ∙ 49.5 mm Installing and removing oil filters and oil filter housing caps when changing the oil filter element

•Forged design

•6-point Wrench size 36 mm e.g. for MERCEDES-BENZ engine 116 MB ∙ 100 D Transporter ∙ Actros MP 1 ∙ MP 2 ∙ BMW M 52-6-cylinder: 3 Series ∙ 5 Series ∙ M 60-8-cylinder: 5 Series ∙ 7 Series ∙ 8 Series ∙ M 73-12-cylinder: 7 Series ∙ 8 Series ∙ 1 Series (E87): 118d ∙ 120d ∙ 1 Series (F20) 118i ∙ OPEL/VAUXHALL Vectra B DI 16 V ∙ Insignia ∙ VW Lupo 1.2 TDi ∙ Polo 5 1.2 l ∙ Golf 6 1.4 l SRE/TSI ∙ Touareg TDi ∙ T5 2.5 D ∙ Passat B7 3.6 l FSI ∙ AUDI 6-cylinder petrol engines model year 12/2007 → For MAN fuel filters e.g. TGA

•Surface: chrome-plated

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch)

•Output: Outside hexagon profile

•Diameter: 49.5 mm

•Net weight: 0.16 kg

•For manual operation

Application: HAZET Oil filter wrench 2169-66 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Groove profile ∙ 76 mm Operating Purflux oil filters

•Wrench size 66 mm groove profile (6 grooves)

•RENAULT Clio, Twingo (also operation of the oil filter housing cap) ∙ Kangoo, FIAT Punto ∙ Stilo ∙ Brava ∙ Bravo with 1.2 l, LANCIA Y 1.2 l, MAZDA 323 ∙ 626 ∙ MX 3 ∙ Xedos, MITSUBISHI Colt ∙ Carisma ∙ Space Star, NISSAN Micra ∙ Primera ∙ Serena, TOYOTA Yaris ∙ Starlet, MR 2 ∙ Corolla ∙ Carina ∙ Avensis

•Inside square 12.5 = 1/2″ or outside hexagon Hexagon with bore 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Groove profile

•Diameter: 76 mm

•Net weight: 0.18 kg

Application: HAZET Oil filter wrench 2169-7 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 14-point profile ∙ 76 mm Operating oil filters and oil filter housings made of plastic

•For the operation of oil filters 14-point Wrench size 64 mm on TOYOTA Yaris ∙ Corolla ∙ MR2 model year → 1999 ∙ Starlet ∙ Celica ∙ Avensis NISSAN Micra ∙ Almera MAZDA 323 ∙ 626 ∙ MX-5 ∙ Xedo MERCEDES-BENZ A-Class (type 177), B-Class (type 247) with OM 608 engine SMART ForFour (type 454) engine 134 ∙ 135 ∙ SMART Fortwo (type 451) engine 132 ∙ and SUBARU ∙ SUZUKI ∙ DAIHATSU Also suitable for YAMAHA Super Ténéré XT1200 z ∙ YZF-R1 model year 2007 → ∙ YZF-R6 model year 2006 → ∙ FZ1-S model year 2006 ∙ FZ1-N model year 2006 → ∙ FZ6-S model year 2007 → ∙ FZ6-N model year 2007 BMW G310R and G310GS

•Inside square Drive 12.5 = 1/2″ or outside hexagon: 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 14-point profile

•Diameter: 76 mm

•Net weight: 0.18 kg

Application: HAZET Oil filter wrench 2169-86 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Groove profile ∙ 97 mm Operating Purflux oil filters

•Wrench size 86 mm groove profile (9 grooves)

•For e.g. ALFA ROMEO 145 ∙ 146 ∙ 156 1.9 JTD ∙ 156 2.4 JTD ∙ VW Golf 3 ∙ Sharan ∙ Vento ∙ Passat with TDi engine ∙ Lupo ∙ Polo 1.7 SDi ∙ AUDI A4 ∙ A6 with TDi engine 85 KW/115 PS ∙ FIAT Bravo and Brava 1.9 JTD ∙ RENAULT Clio ∙ R 19 with 1.4 – 1.7 and 1.8 l ∙ Mégane 1.4 and 2.0 l ∙ Rapid with 1.9 D ∙ Laguna ∙ Safrane and Espace 3 with 2.1 D ∙ SEAT Alhambra ∙ 1.9 TDi ∙ Arosa 1.7 SDi ∙ SUZUKI Grand Vitara 1.9 DDIS for fuel filters e.g. MERCEDES-BENZ Vito ∙ Sprinter ∙ A-Class (type 168) ∙ C-Class (type 202) ∙ E-Class (type 210)

•Inside square 12.5 = 1/2″ or outside hexagon Hexagon with bore 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Groove profile

•Diameter: 97 mm

•Net weight: 0.24 kg

Application: HAZET Oil filter wrench 2169-11 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 14-point profile ∙ 97 mm Operating oil filters and oil filter housings made of plastic

•14-point Wrench size 84 mm Operation of plastic oil filter housings e.g. on- MERCEDES-BENZ V6 diesel engines OM642 among others for 164 ∙ 203 ∙ 204 ∙ X204 ∙ 210 ∙ 212 ∙ 639

•Operation of fuel filter housing cover on MERCEDES-BENZ type 213 with OM 654

•Inside square Drive 12.5 = 1/2″ or outside hexagon: 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 14-point profile

•Diameter: 97 mm

•Net weight: 0.27 kg

Application: HAZET Oil filter wrench 2171-1 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ 80 – 110 Operation of oil filters e.g. as an assembly tool for oil and fuel filters on MAN commercial vehicles

•Steel strip adjustable to seven positions

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 160 mm

•Diameter (min-max): 80 – 110 mm

•Net weight: 0.22 kg