HAZET Band oil filter wrenches

Application: HAZET Oil filter wrench 2171-2 ∙ 75 – 110 Operation of oil filters e.g. as an assembly tool for oil and fuel filters on MAN commercial vehicles

•Steel strip adjustable to seven positions

•Made in Germany

•Dimensions / length: 230 mm

•Diameter (min-max): 75 – 110 mm

•Net weight: 0.32 kg

HAZET Universal strap wrench 2170 ∙ 80 – 180 •Especially for oil filters, generators and other round screwed connections

•Cotton textile tape, rubber coated, height 19.5 mm

•Non-skidding

•Surface: chrome-plated

•Made in Germany

•Diameter (min-max): 80 – 180 mm

•Net weight: 0.3 kg

Application: HAZET Oil filter chain wrench 2171-8 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ 50 – 150 Operating oil filters and other cartridges on passenger and commercial vehicles

•Operation even in areas with restricted access

•With chain

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Diameter (min-max): 50 – 150 mm

•Net weight: 0.41 kg

HAZET Oil filter wrench 2172 ∙ Square, hollow 10 mm (3/8 •For oil filters in areas with restricted access

inch) ∙ 65 – 115 •Left-hand and right-hand operation

•Universal application

•Inside square Drive 10 = 3/8″ or Outside hexagon 19 mm

•Forged design

•Surface: galvanised

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch)

•Diameter (min-max): 65 – 115 mm

•Net weight: 0.51 kg

Application: HAZET Oil filter chain wrench 2171-8LG ∙ Square, hollow 12.5 mm (1/2 inch) ∙ 50 – 150 Operation of oil filters and air dryer cartridges

•The opening in the oil filter chain allows them to be used even in places which are difficult to reach due to the construction

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Diameter (min-max): 50 – 150 mm

Application: HAZET Cartridge wrench 2195 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ 90 – 140 Operating the granulates cartridge on commercial vehicles with compressed air dryers

•Forged design

•Design “Made by HAZET”

•Negative position of arms

•MAN No. 8099606-0307

•Surface: burnished, oiled

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Diameter (min-max): 90 – 140 mm

•Net weight: 0.91 kg

HAZET Oil filter wrench set 2169/6 ∙ Square, hollow 10 mm •Operating oil filters and oil filter housings made of (3/8 inch), Square, hollow 12.5 mm (1/2 inch) ∙ Outside plastic

hexagon profile ∙ Number of tools: 6 •Oil filter wrench set, contents: 2169 ∙ 2169-1 ∙ 2169-6 2169-36 ∙ 2169-76 ∙ 2169-86

•Fast application, safe, appropriate and clean working

•The torque value recommended by the vehicle manufacturer can be safely achieved, e.g. with the HAZET 6110-1 CT (10 = 3/8″) and HAZET 6121-1 CT (12.5 = 1/2″) torque wrenches

•Caution: Follow vehicle manufacturer’s specifications concerning torque values

•Made in Germany

•Drive: Square, hollow 10 mm (3/8 inch), Square, hollow 12.5 mm (1/2 inch)

•Output: Outside hexagon profile

•Net weight: 1.37 kg

•Number of tools: 6

Application: HAZET Oil filter wrench 2169-13 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Outside 14-point profile ∙ 107 mm Operating oil filters and oil filter housings

•14-point Wrench size 80 mm

•Operation of the oil filters in Hyundai i30 ∙ Tucson KIA Ceed ∙ Sportage ∙ Soul ∙ Stonic with 1.6 CRDI engine

•Positive mounting of the oil filter housing

•Required torque-controlled screw tightening is possible

•Inside square Drive 12.5 = 1⁄2″

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Outside 14-point profile

•Diameter: 107 mm

Application: HAZET Oil filter wrench 2169-76B ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Groove profile ∙ 85 mm Operating Purflux oil filters

•Wrench size 76 mm groove profile (6 grooves)

•Safe, non-conductive protective coating against danger of short circuit: In some RENAULT, e.g. K9K engine, the oil filter is located very close to the alternator or the starter

•Eye-catching coat colour reduces the risk of it being left in the engine compartment after operation

•For e.g. AUDI ∙ CITROËN ∙ DACIA ∙ FIAT ∙ FORD ∙ MERCEDES-BENZ ∙ NISSAN ∙ PEUGEOT ∙ RENAULT ∙ HONDA ∙ OPEL/VAUXHALL ∙ SUZUKI ∙ VW ∙ SEAT ∙ ŠKODA

•Inside square 12.5 = 1/2″ or outside hexagon Hexagon with bore 24 mm

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Groove profile

•Diameter: 85 mm

Application: HAZET Oil filter wrench 2169/3 ∙ Number of tools: 3 Operating oil filters and oil filter housings

•Positive mounting of the oil filter housing

•Required torque-controlled screw tightening is possible

•3-piece set for the operation of oil filters

•2169-8A (15-edged Wrench size 74 mm): FORD models with e.g. EcoBoost engines among others B-Max ∙ C-Max 2 ∙ Fiesta 5 / 6 / 7 ∙ Focus 2 / 3 ∙ Fusion ∙ Galaxy ∙ Mondeo 4 / 5 ∙ Tourneo ∙ Transit, Ka+ ∙ Kuga 2 ∙ S-Max MAZDA 2 (DL ∙ DJ) 1.5D ∙ 3 (BK ∙ BL) 2.0 (BM ∙ BN) 1.5D - 2.2D (BP) 1.8D ∙ 5 (CW) 1.8 / 2.0 ∙ 6 (GG) 1.8 / 2.0 (GY ∙ GH) 1.8-2.0-2.5 (GJ ∙ GL) 2.2D ∙ CX / 3 (DK ) 1.5D / 1.8D ∙ CX-5 (KE ∙ GH ∙ KF) 2.2D ∙ CX-7 (ER) 2.3D / 2.5D ∙ MX-5 (NC) 1.8 / 2.0

•2169-12 (15 grooves Wrench size 74.7 mm): OPEL/VAUXHALL models Astra K ∙ Insignia B with 1.5 diesel engines F15DVC ∙ F15DVH with 77KW / 90KW

•2169-13 (14-edged Wrench size 80 mm): HYUNDAI i30 ∙ Tucson KIA Ceed ∙ Sportage ∙ Soul ∙ Stonic with 1.6 CRDI engine





•Inside square Drive 12.5 = 1⁄2″

•Number of tools: 3

HAZET Oil service wrench 4618 •For the oil filler and oil drain plug on gearbox, differential, oil pan e.g. on FORD

•With different squares 8.7 ∙ 9.5 ∙ 10.5 ∙ 11.5 ∙ 13 ∙ 6.8 ∙ 15.2 ∙ 16.5 ∙ 19.7

•Surface: chrome-plated

•Made in Germany

•Dimensions / length: 218 mm

•Net weight: 0.44 kg

HAZET Oil service wrench 2760-2 ∙ 13 x 14 mm •Inside hexagon: 14 mm Outside hexagon: 13 mm

•For oil filler screw on M8 gearbox

•Surface: chrome-plated

•Made in Germany

•Wrench size: 13 x 14 mm

•Dimensions / length: 287 mm

•Net weight: 0.3 kg