KS TOOLS BT141903 Torque wrench 10 (3/8") mm (inch) 5-50 Nm 5-50 Nm, with analog display, Rectangle, DIN 3120, ISO 1174

12 pairs of black micro fine-knit gloves, L / 9, 12 pcs •7 ball bearing drawer with 100% pull-out and capacity of 35 kg

•Enormous stability due to individual fastening of each drawer

•400 kg total load capacity

•Unpacking – immediately ready to use



The high-quality powder-coated BRILLIANT TOOLS professional workshop trolley BT153473 is always there just when it’s needed! Spending all day running back and forth is a thing of the past! With help from the ergonomic push handle integrated into the plastic tray, it’s quite easy to manoeuvre through the workshop and protects the edges on the corners from collisions. Thanks to its 2 parking brakes on the swivel castors, it remains in place at its destination. More room! The professional workshop trolley has seven drawers. Two drawers are extra high and thus provide plenty of space for drills and other large tools. With the hanging slot on the side, additional storage space can be created with the right brackets. All drawers are supported by ball bearings and pull out 100% even at the maximum capacity of 35 kg. This means that getting to your tools is no problem whatsoever. To make sure your professional workshop trolley does not tip over, all drawers lock individually and can also be secured with the central lock. No more laborious assembly required! The professional workshop trolley comes fully preassembled and with three drawers installed. Unpack – and done! It is ready to use immediately. The search is now at an end! The 2-coloured foam inserts make sure that your 473 tools are always in order and can be reached immediately in the drawers. Missing tools are also immediately apparent. Everything you want ready to hand at all times can be kept on the sturdy plastic tray. It has even more compartments for screws, bits or other small tools. The professional workshop trolley is used to the rough handling of the workshop. With its ample equipment, you're prepared for anything that might happen! The professional workshop trolley in detail: Total capacity: W 77 x H 97.5 x D 47 cmDrawer internal dimensions: 5x 52.8 cm x 39.8 cm x 55 mm2x 52.8 x 39.8 x 13.5 cmTotal load capacity: 400 kgLoad capacity of each drawer: 35 kgFull pull-out: YesBall-bearing: YesLocking mechanism: IndividualCentral lock: on the side, 2 keysEdge protection: PlasticCastor: 2 swivel castors, 2 fixed castors The foam inserts in detail: Drawer 1 Socket spanner, 170-piece:With 6.3 mm (1/4") drive:- 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm, for each hexagonal socket- Extra-long, 4, 5, 6, 7, 8, 9, 10 mm, for each hexagonal socket- E4, E5, E6, E7, E8, for each Torx E-socket- T-Profile T8, T9, T10, T15, T20, T25, T27, T30, for each bit socket- Tamper-proof T-profile, TB8, TB9, TB10, TB15, TB20, TB25, TB27, TB30, for each bit socket- Pozidriv PZ0, PZ1, PZ2, for each bit socket- Hexagon, 3, 4, 5, 6 mm, for each bit socket- Slotted, 4, 5.5, 6.5, 7 mm, for each bit socket- Cross-head, PH0, PH1, PH2, for each bit socket- For each 50 and 10 cm extension- 1 Universal joint- 1 rotary handle, 15 cm- 1 1/4" reversible ratchet 14.5 cm, 72 teeth, finely toothed- 1 slider, 11 cmwith 10 mm (3/8") drive:- 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, for each hexagonal socket- Extra-long, 10, 11, 12, 13, 14, 15 mm, for each hexagonal socket- E10, E11, E12, E14, E16, E18, for each Torx E-socket- 1 extension, 12.5 cm- 1 3/8" reversible ratchet, 20.5 cm, 72 teeth, finely toothed- 1 spark plug socket, 18 mm- 1 bit adapter for 8 mm bits- 1 Universal jointwith 12.5 mm (1/2") drive:- 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm, for each hexagonal socket- Extra-long, 16, 17, 18, 19, 22 mm, for each hexagonal socket- E20, E24 for each Torx E-socket- 16, 21 mm for each spark plug socket- 1 rotary handle, 25 cm- 1 extension, 12.5 cm- 1 1/2" reversible ratchet 25 cm, 72 teeth, finely toothed- 1 Universal joint- 1 bit adapter for 8 mm bits- Bits in 8 mm drive x 30 mm length:- Tamper-proof Torx TB40, TB45, TB50, TB55, TB60, TB70 for each bit- Torx T40, T45, T50, T55, T60, T70 for each bit- Hexagon, 7, 8, 10, 12, 14 mm for each bit- Cross-head, PH3, PH4 for each bit- Slotted, 8, 10, 12 mm for each bit- Pozidriv PZ3, PZ4 for each bit- 1.27, 1.5, 2, 2.5, 3, 4, 5 mm for each hexagonal socket- Bits in 6.3 mm (1/4") drive x 25 mm length:- Spline M5, M6, M8 for each bit- T-profile T5, T6, T7 for each bit- RIBE profile M5, M6, M7, M8, M9 for each bit- Five star TS10, 15, 20, 25, 27, 30, 40, 45 for each bit- Tamper-proof T-profile TB7 for each bit Drawer 2 Screw spanner, 24-piece:- 16 combination spanners: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm- 8 ring spanners, offset: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 mm Drawer 3 Screwdrivers, 21-piece:-8 screwdrivers with hammer cap, cross-head PH2x38 mm, PH1x75 mm, PH2x10 cm, PH3x15 cm, slotted 6x38 mm, 5x75 mm, 6x10 cm, 8x15 cm-1 precision mechanics screwdriver, PH0x10 cm-1 precision mechanics screwdriver, slotted 3 mm x 10 cm-11 Torx screwdrivers, T6x75 mm, T7x75 mm, T8x75 mm, T9x75 mm, T10x75 mm, T15x10 cm, T20x10 cm, T25x10 cm, T27x10 cm, T30x10 cm, T40x15 cm Drawer 4 Right-angle wrenches 18-piece:-9 hexagonal socket right-angle wrenches, 2x10 cm, 2,5x10 cm, 3x10 cm, 4x15 cm, 5x15 cm, 6x15 cm, 7x15 cm, 8x20 cm, 10x20 cm-9 Torx right-angle wrenches, T10x75, T15x100, T20x100, T25x150, T27x150, T30x150, T40x150, T45x200, T50x200 mm Drawer 5 Ratchet ring spanners, 15-piece:-15 ratchet ring spanners 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 24, 27, 30 mm Drawer 6 Pliers, hammer, chisel, 16-piece:-1x 300 g hammer each-1 needle-nose pliers, straight each-1 needle-nose pliers, angled each-1 retaining ring pliers each for internal retaining rings, straight-1 retaining ring pliers each for internal retaining rings, angled-1 retaining ring pliers each for external retaining ring, straight-1 retaining ring pliers each for external retaining rings, angled-1 combination pliers each-1 side cutter each-6 pin punches, 1.5, 3, 4, 5, 6, 8 mm