KS TOOLS 117.7524 Wall-mounted charging station Mode 3, Charging plug type 2, 16A, 32A, black

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 3.7 kW, 16 A, 230 V, Mode 3, with RFID access control, with IEC61851

electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•RFID access control

•MID electricity meter

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.