KS TOOLS Charger

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 7.4 kW, 32 A, 230 V, Mode 3, without RFID access control, IEC61851

without electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 7.4 kW charging capacity

•32 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 socket, 1-phase, up to 3.7 kW, •charging station for wall or column mounting compliant with 16 A, 230 V, Mode 3, without RFID access control, without IEC61851

electricity meter •for electric and hybrid vehicles

•with socket Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and simply with your personal Type 2 charging cable. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 3.7 kW, 16 A, 230 V, Mode 3, without RFID access control, IEC61851

with electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•MID electricity meter

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 7.4 kW, 32 A, 230 V, Mode 3, without RFID access control, IEC61851

with electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 7.4 kW charging capacity

•32 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•MID electricity meter

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 socket, 1-phase, up to 3.7 kW, •charging station for wall or column mounting compliant with 16 A, 230 V, Mode 3, without RFID access control, with IEC61851

electricity meter •for electric and hybrid vehicles

•with socket Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•MID electricity meter

•with overheating protection

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and simply with your personal Type 2 charging cable. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 7.4 kW, 32 A, 230 V, Mode 3, with RFID access control, IEC61851

without electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 7.4 kW charging capacity

•32 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•RFID access control

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 charging cable, 3-phase, up to •charging station for wall or column mounting compliant with 22 kW, 32 A, 400 V, Mode 3, with RFID access control, IEC61851

without electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 22 kW charging capacity

•32 A (three-phase)

•400 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•RFID access control

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet. Due to the Wallbox's very small housing size, it is unfortunately not possible to integrate an electricity meter into our efuturo Wallboxes delivering 11 kW or 22 kW. We offer an electricity meter separately instead. This can be easily affixed by an electrician in the switch cabinet to a profile rail and connected in front of the Wallbox. The power consumption can be read off using this MID-calibrated electricity meter. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter.

efuturo wallbox with Type 2 charging cable, 3-phase, up to •charging station for wall or column mounting compliant with 11 kW, 16 A, 400 V, Mode 3, without RFID access control, IEC61851

without electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 11 kW charging capacity

•16 A (three-phase)

•400 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet. Due to the Wallbox's very small housing size, it is unfortunately not possible to integrate an electricity meter into our efuturo Wallboxes delivering 11 kW or 22 kW. We offer an electricity meter separately instead. This can be easily affixed by an electrician in the switch cabinet to a profile rail and connected in front of the Wallbox. The power consumption can be read off using this MID-calibrated electricity meter. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter.

efuturo electricity meter for top-hat rail, MID-calibrated, •MID-calibrated

3-phase, 11 or 22 kW •LCD display

•installation on top-hat rail

•pulse output

•for all efuturo wallboxes with 11 kW or 22 kW output



Due to the Wallbox's very small housing size, it is unfortunately not possible to integrate an electricity meter into our efuturo Wallboxes delivering 11 kW or 22 kW. We offer an electricity meter separately instead. This can be easily affixed by an electrician in the switch cabinet to a profile rail and connected in front of the Wallbox. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter.

efuturo Storage bag for charging cable, round, ∅ 40 cm, •round execution

height 12 cm •with zip fastener

•side mounted carry handles

•extremely strong and robust

•Ø 400 mm

•black



Your charging cable is always stored securely using our efuturo storage bag. Therefore your charging cable is not untidy and unprotected in your boot. The round shape makes it easier to store and remove the charging cable. The robust bag with two carry handles has a diameter of 400mm. There is just enough space for a cable and a coiled cable up to 8 m length. Of course you can also use the bag to store our mobile chargers. Light dirt can be easily removed from inside and outside the storage bag using a damp cloth.

efuturo column for two wallboxes, grey •suitable for indoors and outdoors

•steel - grey powder-coated

•particularly suited for efuturo wallboxes

•simple installation since required drill holes already exist

•corrosion resistant



The elegant, simple column makes it possible to install two efuturo wallboxes. The column was specifically designed for the efuturo wallboxes. When delivered, it already has all the required drill holes to anchor the column to the floor and to attach the wallbox to the column. Thanks to the powder coating, the column is corrosion-resistant and can be installed both indoors and outdoors. Transform your personal parking space or the company car park for your employees and customers into your individual service station for electric and hybrid vehicles.

efuturo electricity meter for top-hat rail, MID-calibrated, •MID-calibrated

1-phase, 3.7 or 7.4 kW •LCD display

•installation on top-hat rail

•pulse output

•for all efuturo wallboxes with 3.7 kW or 7.4 kW output



This electricity meter is suitable for installation in our single-phase efuturo 3.7 kW or 7.4 kW wallboxes. The meter is installed on the top-hat rail in the wallbox and is required to calculate the energy consumption while charging your electric or hybrid vehicle. The MID calibration means that the electricity meter is approved for consumption billing.

efuturo column for a wallbox, grey •suitable for indoors and outdoors

•steel - grey powder-coated

•particularly suited for efuturo wallboxes

•simple installation since required drill holes already exist

•corrosion resistant



The elegant, simple column makes it possible to install an efuturo wallbox. The column was specifically designed for the efuturo wallboxes. When delivered, it already has all the required drill holes to anchor the column to the floor and to attach the wallbox to the column. Thanks to the powder coating, the column is corrosion-resistant and can be installed both indoors and outdoors. Transform your personal parking space or the company car park for your employees and customers into your individual service station for electric and hybrid vehicles.

efuturo mobile charging station with Type 2 charging cable, •mobile charging station to EN 61851-21-2: 2017

1-phase, up to 3.7 kW, 10 or 16 A, 230 V, Mode 2, shock-proof-plug •for electric and hybrid vehicles

•type 2 (IEC 62196-2)

•shock-proof plug

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V / 50 Hz

•mode 2

•ampere adjustable: 10 or 16 Ampere

•residual current circuit breaker RCD Type A

•with overheating protection

•1.30 metres cable length in front of housing

•4.00 metres cable length behind the housing

•CE and RoHS CErtified



The efuturo mobile charging station's compact design makes it a space-saving charging station for electric and hybrid vehicles. The integrated LED display means that the mobile charging station is easy to operate and delivers information about the charging status or possible error messages at a glance. The amperage can be adjusted to 10 or 16 A. The high-quality plastic housing is ideal for safe operation of the mobile charging station both indoors and out. The ergonomically shaped type 2 charging plug, along with the high-quality and durable cable with a total action radius of 5.5 metres, connects the mobile charging station quickly and easily to your electric or hybrid vehicle. Following brief communication between the mobile charging station and the vehicle, charging of the vehicle battery begins. This means that the charging time can be reduced significantly. While the charging cycle for a Renault Zoe at a household plug socket (2.3 kW) takes around 25 hours, with a 3.7 kW mobile charging station, it takes around 16 hours.

efuturo wallbox with Type 2 charging cable, 1-phase, up to •charging station for wall or column mounting compliant with 3.7 kW, 16 A, 230 V, Mode 3, without RFID access control, IEC61851

without electricity meter •for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The charging of the vehicle battery begins after short communication between the wallbox and vehicle without access control. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 socket, 1-phase, up to 3.7 kW, •charging station for wall or column mounting compliant with 16 A, 230 V, Mode 3, with RFID access control, with IEC61851

electricity meter •for electric and hybrid vehicles

•with socket Type 2 (IEC 62196-2)

•up to 3.7 kW charging capacity

•up to 16 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•MID electricity meter

•with overheating protection

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and simply with your personal Type 2 charging cable. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

efuturo wallbox with Type 2 socket, 1-phase, up to 7.4 kW, •charging station for wall or column mounting compliant with 32 A, 230 V, Mode 3, with RFID access control, with IEC61851

electricity meter •for electric and hybrid vehicles

•with socket Type 2 (IEC 62196-2)

•up to 7.4 kW charging capacity

•32 A (single-phase)

•230 V

•mode 3

•residual current circuit breaker RCD Type B

•MID electricity meter

•with overheating protection

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and simply with your personal Type 2 charging cable. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. With the installed electricity meter you can read the energy consumption. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet.

•charging station for wall or column mounting compliant with IEC61851

•for electric and hybrid vehicles

•with charging cable Type 2 (IEC 62196-2)

•up to 11 kW charging capacity

•16 A (three-phase)

•400 V

•mode 3

•residual current circuit breaker RCD Type B

•with overheating protection

•5 metres cable length

•RFID access control

•practical holder for Type 2 plug

•TÜV approved, CE and RoHS certified



Its compact design makes the efuturo wallbox a space-saving charging station for electric and hybrid vehicles. The wallbox is easy to operate thanks to the integrated LED display and at a glance provides information about the charging status or possible error messages. The wallbox is protected by an RCD Type B residual current circuit breaker and therefore fulfils the highest safety standards. The high-quality plastic housing is suitable for safe operation of the efuturo wallbox outdoors. The ergonomically designed Type 2 charging plug and the high-quality and durable cable with overall 5 metres' reach connect the wallbox quickly and simply with your electric or hybrid vehicle. The integrated RFID card reader allows you to prevent the wallbox being used by unauthorised third parties. Just hold the supplied RFID card against the wallbox. The charging procedure is only activated after this authentication. The wallbox begins communication with the vehicle. When you are not using the wallbox, you can store the Type 2 plug tidily in the holder provided for this purpose. This avoids damage to the plug from driving over it or similar. Transform your garage or your customer car park into your personal service station for your electric and hybrid vehicles with the efuturo wallbox. The column which is optionally available accentuates your wallbox further. With the efuturo wallbox, it is possibly to reduce your charging time significantly. Whereas the charging cycle for a Renault Zoe at a domestic socket (2.3 kW) takes approximately 25 hours, it still takes approximately 16 hours with a 3.7 kW wallbox and only 4.5 hours at 11 kW. A 22 kW wallbox is up to 10 times faster. The charging time is reduced to approximately 2.5 hours in this case. The fact that our common household sockets are not designed for the amounts of electricity required for charging electric and hybrid cars has to be taken into account. While it is possible to charge at household sockets, this should only be seen as an emergency solution. The simple structure of the efuturo wallbox ensures that your electrician's invoice does not contain any unpleasant surprises. The installed components are well-known to your electrician. The extremely expensive RCD Type B residual current circuit breaker is already integrated into the efuturo wallbox. This ensures maximum safety and the circuit breaker does not also have to be installed by the specialist in the external switch cabinet. Due to the Wallbox's very small housing size, it is unfortunately not possible to integrate an electricity meter into our efuturo Wallboxes delivering 11 kW or 22 kW. We offer an electricity meter separately instead. This can be easily affixed by an electrician in the switch cabinet to a profile rail and connected in front of the Wallbox. The power consumption can be read off using this MID-calibrated electricity meter. This allows you to monitor your energy consumption. Landlords can invoice the consumption of the charging current to their tenants via the MID calibrated electricity meter.