• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

VW Golf Mk7 2.0 R 4motion Water pump + timing belt kit (292 hp Petrol DLRA)

Timing belt kit with water pump VW Golf Mk7 2.0 R 4motion 292 Petrol Engine

Recommended part replacement interval for your car for the part category Water pump + timing belt kit: every 70.000 km

4 items
    • Construction Year from: 01 / 2015
    • Construction Year to: 03 / 2017
    • Driven Units: Water Pump
  • Supplementary Article / Supplementary Info: with water pump
  • Observe technical data
  • Item number: KP15713XS
  • Our price: 43,49 €
  • Manufacturer: GATES
  • EAN number: 5400608615586
  • Condition: New
Contents of the Water pump and timing belt kit GATES set:
Description of the product
Units
Article number
1
5713XS
Water Pump, engine cooling
1
WP0164
Bolt and Nut Kit
1
SET 178
Details
In stock
43,49 €

price incl. 19% VAT

excl. delivery costs

  • Number of Teeth: 67
  • Width [mm]: 12
  • Length [mm]: 335
  • Driven Units: Water Pump
  • TecDoc Engine Number: DLRA
  • Tooth Pitch [mm]: 5
  • Item number: 1 987 946 975
  • Our price: 49,99 €
  • Manufacturer: BOSCH
  • EAN number: 4047026353167
  • Condition: New
Show OEM numbers of the product
Contents of the Water pump and timing belt kit BOSCH set:
Description of the product
Units
Article number
1
1 987 949 685
Water Pump, engine cooling
1
1 987 949 795
Details
In stock
-65%
compared to RRP 142,80 €

49,99 €

price incl. 19% VAT

excl. delivery costs

  • Number of Teeth: 29
  • Housing Type: with housing
  • Operating Mode: Mechanical
  • Supplementary Article / Supplementary Info Info 2: with thermostat, with belt
  • Alternative Repair Kit: 4007031
  • Item number: 4007039
  • Our price: 336,50 €
  • Manufacturer: METZGER
  • EAN number: 4062101096746
  • Condition: New
Show OEM numbers of the product
Additional information

Note the installation instructions of the original manufacturer during assembly.

Details
Get a bonus of 1,16 € when you purchase this product
You will receive 1,16 € in your bonus account if you buy this product:
  • Accumulate your bonuses through purchasing items marked “BONUS";
  • Pay for up to 10% of your order with the accumulated bonuses;
More
Free delivery on this item
In stock
-25%
compared to RRP 451,00 €

336,50 €

price incl. 19% VAT

free delivery

KDP457.870 Water pump + timing belt kit Volkswagen GOLF 2.0R 4motion 292 hp 215 kW CYFB 2017 5G1, BQ1, BE1, BE2 SNR KDP457870 Water pump + timing belt kit Golf 7 2.0 R 4motion 292 hp Petrol 2016 price
SNR KDP457.870 Water pump and timing belt kit
Article number: KDP457.870
Submit a review
  • Item number: KDP457.870
  • Our price: 64,99 €
  • Manufacturer: SNR
  • EAN number: 3413522214461
  • Condition: New
Show OEM numbers of the product
Contents of the Water pump and timing belt kit SNR set:
Description of the product
Units
Article number
Timing Belt
1
CDI
Water Pump, engine cooling
1
PEA
Details
Сurrently out of stock
64,99 €

price incl. 19% VAT

excl. delivery costs

VW Golf VII Hatchback (5G1, BQ1, BE1, BE2) 2.0 R 4motion Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZB, 1ZD, 1LV, 1ZC, 1ZG
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: 25833
  • Manufacturer: MAPCO
  • EAN number: 4043605415516
  • Condition: New
Show OEM numbers of the product
Details
In stock
37,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310,0
  • for PR number: 1KJ, 1KY
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Vehicle Equipment: for vehicles with electric parking brake
  • Brake Disc Thickness [mm]: 22,0
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 20,0
  • Inner Diameter [mm]: 169,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0118 / 0945
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0122-0219.1
  • Manufacturer: ATE
  • EAN number: 4006633229630
  • Condition: New
Show OEM numbers of the product
Details
In stock
-59%
compared to RRP 143,28 €

58,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • for PR number: 1ZE, 1ZP
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 0010
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0125-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633113472
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 126,62 €

47,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • for PR number: 1ZA, 1ZB, 1ZD, 1LV
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 156,13 €

58,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • for PR number: 1ZE, 1ZP
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PowerDisc
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0858 / 1210
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0325-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633128186
  • Condition: New
Show OEM numbers of the product
Additional information

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

Details
Free delivery on this item
In stock
-59%
compared to RRP 150,65 €

60,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KJ, 1KY
  • Brake Disc Type: Externally Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Product line: COAT Z
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 49
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 6,8
  • Test Mark: ECE R90 APPROVED
  • Item number: 100.3309.20
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238718208
  • Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to RRP 137,70 €

42,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • for PR number: 1ZE, 1ZP
  • Brake Disc Type: Vented
  • Drilled: no
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Weight [kg]: 8,14
  • Required quantity: 2
  • Brake Disc Hub Height [mm]: 24,7
  • Packaging width [cm]: 30
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 30
  • Item number: V10-80070
  • Manufacturer: VAICO
  • EAN number: 4046001323638
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
-73%
compared to RRP 132,09 €

34,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KJ, 1KY
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Hub Diameter [mm]: 150
  • Replace in pairs only
  • Item number: 110 418
  • Manufacturer: TOPRAN
  • EAN number: 6156450000023
  • Condition: New
Show OEM numbers of the product
Additional information

Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Details
Free delivery on this item
In stock
-18%
compared to RRP 75,58 €

61,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 272,0
  • for PR number: 1KE, 2EJ
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Coated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 9,7
  • Height [mm]: 48,2
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 8,0
  • Inner Diameter [mm]: 149,0
  • MAPP code available
  • Test Mark: E1 90R-02C0165 / 0523
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0110-0356.1
  • Manufacturer: ATE
  • EAN number: 4006633344531
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 105,43 €

39,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • for PR number: 1ZA, 1ZB, 1ZD, 1LV
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PowerDisc
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0858 / 1214
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0325-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633312677
  • Condition: New
Show OEM numbers of the product
Additional information

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

Details
Free delivery on this item
In stock
-62%
compared to RRP 195,40 €

72,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KY
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • TecDoc Engine Number: DLRA
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Bore Diameter up to [mm]: 15,3
  • fulfils ECE norm: ECE-R90
  • Item number: 0 986 479 303
  • Manufacturer: BOSCH
  • EAN number: 4047024233768
  • Condition: New
Show OEM numbers of the product
Details
In stock
-74%
compared to RRP 140,42 €

35,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KJ, 1KY
  • Brake Disc Type: Externally Vented, Perforated
  • Drilled: yes
  • Surface: Coated
  • Machining: High-carbon
  • Product line: SPORT COAT Z
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 49
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Hole Arrangement / Number: 10 / 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 6,8
  • Test Mark: ECE R90 APPROVED
  • Item number: 100.3309.52
  • Manufacturer: ZIMMERMANN
  • EAN number: 4250238749301
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-62%
compared to RRP 196,90 €

72,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1LV
  • Brake Disc Type: internally vented
  • Drilled: no
  • Surface: Coated
  • TecDoc Engine Number: DJJA
  • Brake Disc Thickness [mm]: 25
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Thickness [mm]: 50
  • Minimum thickness [mm]: 22
  • Weight [kg]: 8,6
  • Number of mounting bores: 1
  • Observe service information
  • Item number: 24384
  • Manufacturer: FEBI BILSTEIN
  • EAN number: 4027816243847
  • Condition: New
Show OEM numbers of the product
Additional information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Details
In stock
31,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KJ
  • Brake Disc Type: internally vented
  • Drilled: no
  • Surface: Coated
  • TecDoc Engine Number: CYFB, DLRA, DJJA
  • Brake Disc Thickness [mm]: 22
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Thickness [mm]: 49
  • Minimum thickness [mm]: 20
  • Weight [kg]: 7,04
  • Number of mounting bores: 1
  • Observe service information
  • Item number: 24386
  • Manufacturer: FEBI BILSTEIN
  • EAN number: 4027816243861
  • Condition: New
Show OEM numbers of the product
Additional information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Details
In stock
-58%
compared to RRP 90,00 €

37,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • for PR number: 1KJ, 1KY
  • Brake Disc Type: Vented
  • Drilled: no
  • Vehicle Equipment: for vehicles with electric parking brake
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Weight [kg]: 7,909
  • No. of holes 2: 9
  • Brake Disc Hub Height [mm]: 46,2
  • Packaging width [cm]: 32
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 32
  • Item number: V10-80084
  • Manufacturer: VAICO
  • EAN number: 4046001349461
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
32,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZB, 1ZD, 1LV, 1ZC, 1ZG
  • Brake Disc Type: Vented
  • Drilled: no
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Weight [kg]: 9,31
  • Tightening Torque [Nm]: 120
  • Required quantity: 2
  • Brake Disc Hub Height [mm]: 24,6
  • Packaging width [cm]: 32
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 32
  • fulfils ECE norm: R90
  • Item number: V10-80085
  • Manufacturer: VAICO
  • EAN number: 4046001349478
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
-72%
compared to RRP 166,00 €

45,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on