SKODA Octavia IV Combi (NX5) 1.6 SRE Spark plug (110 hp Petrol DWYA)
Recommended part replacement interval for your car for the part category Spark plug: every 30.000 km / every 18 months
-
- TecDoc Engine Number: DWYA
- Required quantity: 4
- Electrode Gap [mm]: 1,0
- Spanner Size: 16
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 12 x 1,25
- Connector type: Napf
- Tightening Torque [Nm]: 23
- Number of pins: 1
- Item number: 686S0097
- Manufacturer: RIDEX
- EAN number: 4059191982219
- Condition: New

-
- TecDoc Engine Number: DWYA
- Required quantity: 4
- Product line: Nickel
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Electrode Gap [mm]: 1,0
- Spanner Size: 16
- Thread Length [mm]: 19
- Spark Position [mm]: 2,5
- Thread Size: M 12 x 1,25
- Tightening Torque [Nm]: 23
- Resistor [kOhm]: 2
- Item number: 686S0097P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448729692
- Condition: New
-
- TecDoc Engine Number: DWYA
- Construction Year to: 09 / 2022
- Required quantity: 4
- Electrode Gap [mm]: 1,0
- Spanner Size: 16
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 12 x 1,25
- Tightening Torque [Nm]: 23
- Number of pins: 1
- Item number: 0 241 135 520
- Manufacturer: BOSCH
- EAN number: 4047025923309
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZK
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KJ, 0N4
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZK, 1ZU
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: DWYA
- Construction Year to: 09 / 2022
- Fitting Position: Rear Axle
- for PR number: 1KJ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- paired article number: FDB5194
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 15,35
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Item number: DDF1218
- Manufacturer: FERODO
- EAN number: 4044197247547
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- for PR number: 1ZE
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49,7
- Minimum thickness [mm]: 22
- Weight [kg]: 7,56
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 22902
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816229025
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZK
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
-
- TecDoc Engine Number: DWYA
- Construction Year to: 09 / 2022
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- for PR number: 1KE, 2EC
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 272
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- for PR number: 1KJ
- Brake Disc Thickness [mm]: 9,7
- Fitting Position: Rear Axle
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 38,2
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-40086
- Manufacturer: VAICO
- EAN number: 4046001550584
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- for PR number: 1ZE
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0010
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0145.1
- Manufacturer: ATE
- EAN number: 4006633113472
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: DWYA
- Construction Year to: 09 / 2022
- Fitting Position: Front Axle
- for PR number: 1ZK, 1ZU
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,7
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Drilled: no
- Item number: 0 986 479 058
- Manufacturer: BOSCH
- EAN number: 4047026223934
- Condition: New
-
- TecDoc Engine Number: DWYA
- Construction Year to: 09 / 2022
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,9
- Height [mm]: 49,6
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 088
- Manufacturer: BOSCH
- EAN number: 4047024096165
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.9145.14
- Manufacturer: BREMBO
- EAN number: 8020584013922
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: internally vented, slotted
- Product line: MAX LINE
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.9145.75
- Manufacturer: BREMBO
- EAN number: 8020584015162
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZK
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.9772.11
- Manufacturer: BREMBO
- EAN number: 8020584018286
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZU
-
- for PR number: 1ZK
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49,7
- Minimum thickness [mm]: 22
- Weight [kg]: 8,6
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 24384
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243847
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.