Nissan Murano Z50 3.5 4x4 Spark plug (234 hp Petrol VQ35DE)

1.5 mm core nose projection

Available while stocks last

Available while stocks last

BERU Ultra X Titan: The spark plug innovation with the power Recommendation - When changing the spark plugs on vehicles of the Titan.For more sparking power even at higher with connector ignition coils, please replace the connector and use spark plug connector grease(ZKF 01 - Order No. 0 890 combustion chamber pressure – and thus highly effective 300 029) to fit the connector. combustion The power of the Titan: high resistance to erosion, service life up to 60,000 kmHighly erosion-resistant nickel-titanium alloy for the ground electrode – and tapered platinum ignition tip: the optimum combination for high ignition dependability, reliability and longevity.Intelligent electrode design increased ignition reliability, optimized fuel utilization Poly-V electrode with 5 sharp edges which are actuated in a continuous cycle by the spark.Corona discharge: Innovative technology for reliable ignition prevents sootingIntentional predischarge for reliable starting even under adverse conditions – such as extremely low temperatures or several repeated starts. BERU Ultra X Titan – the optimum for the engine 15 Ultra X Titan meet almost 90% of vehicle spare parts demand relevant to service!

1.5 mm core nose projection

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Iridium