Kia Pro Ceed ED 2.0 LPG Spark plug (143 hp Petrol/Liquified Petroleum Gas (LPG) G4GC)
Recommended part replacement interval for your car for the part category Spark plug: every 10.000 km / every 18 months
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 229 660
- Manufacturer: BOSCH
- EAN number: 3165143134306
- Condition: New
- Product line: Nickel
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Spanner Size: 16 mm
- Thread Length [mm]: 12,7
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Item number: U20FS-U
- Manufacturer: DENSO
- EAN number: 0042511040021
- Condition: New
- Product line: Powersport
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Quality / Grade: Nickel GE
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Technical Information Number: RC10YC4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 7,5
- Projection [mm]: 1,5
- Item number: OE063/T10
- Manufacturer: CHAMPION
- EAN number: 5010874505261
- Condition: New
1.5 mm core nose projection
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: GCF860001
- Manufacturer: goCORE
- EAN number: 4067448664146
- Condition: New
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Item number: 0 242 232 502
- Manufacturer: BOSCH
- EAN number: 3165141074994
- Condition: New
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0010
- Manufacturer: VEMO
- EAN number: 4046001273636
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy. / disassy. by qualified personnel required!
- Item number: 8EH 188 705-041
- Manufacturer: HELLA
- EAN number: 4082300337754
- Condition: New
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0012
- Manufacturer: VEMO
- EAN number: 4046001273650
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 3 - Earthed Electrode
- Electrode Gap [mm]: 0,8
- Weight [kg]: 0,048
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0014
- Manufacturer: VEMO
- EAN number: 4046001300240
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Thread Size: M14 x 1.25
- Tightening Torque [Nm]: 25
- Assy. / disassy. by qualified personnel required!
- Item number: 8EH 188 705-061
- Manufacturer: HELLA
- EAN number: 4082300394696
- Condition: New
- Product line: Aerovantage Spoiler
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode
- Electrode Gap [mm]: 0,75
- Spanner Size: 16 mm
- Quality / Grade: Ti Poly-V
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Technical Information Number: CET12P
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Item number: CET12P
- Manufacturer: CHAMPION
- EAN number: 4044197906918
- Condition: New
1.5 mm core nose projection
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 230 557
- Manufacturer: BOSCH
- EAN number: 2230844578700
- Condition: New
-
- Required quantity: 4
- Alternatively
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode
- Electrode Gap [mm]: 0,75
- Spanner Size: 16 mm
- Quality / Grade: Poly-V Tit
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Thread Size: M14x1,25
- Connector type: SAE
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Item number: UPT12P
- Manufacturer: BERU
- EAN number: 4044197961238
- Condition: New
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Quality / Grade: Pt GE
- Supplementary Info: CGP
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Technical Information Number: KC10PYPB4
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1,5
- Item number: OE191/T10
- Manufacturer: CHAMPION
- EAN number: 4044197407347
- Condition: New
1.5 mm core nose projection
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Item number: V99-75-0098
- Manufacturer: VEMO
- EAN number: 4062375530816
- Condition: New
-
- Fuel Type: CNG / LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: SKSP-1990064
- Manufacturer: STARK
- EAN number: 4059191571307
- Condition: New
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Item number: SKSP-19990314
- Manufacturer: STARK
- EAN number: 4065739014427
- Condition: New
- Product line: ULTRA
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Required quantity: 4
- Self-service suited packaging see parts list
- Technical Information Number: 14 F-8 DPURX02
- Packaging length [cm]: 9
- Packaging height [cm]: 2
- Packaging width [cm]: 2
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Item number: Z240
- Manufacturer: BERU
- EAN number: 4014427104759
- Condition: New
- Electrode Gap [mm]: 1,1
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 230 534
- Manufacturer: BOSCH
- EAN number: 4047025094948
- Condition: New
-
- Fuel Type: CNG / LPG
- Replace after km: 30000
- Required quantity: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Length [mm]: 19
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 236 571
- Manufacturer: BOSCH
- EAN number: 4047024277991
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4