Vehicle identification number: 4001530
Fiat Ducato 280 Van 2.0 Spark plug (75 hp Petrol 170 B)
Recommended part replacement interval for your car for the part category Spark plug: every 10.000 km / every 18 months
-
- TecDoc Engine Number: 170 B
- Required quantity: 4
- Fuel Type: CNG / LPG
- Product line: Iridium TT
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Length [mm]: 19
- Thread Size: M14x1.25
- Diameter [mm]: 14
- Gross Weight [g]: 61
- alternative item: IW20TT
- Item number: IW20TT
- Manufacturer: DENSO
- EAN number: 042511470941
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 28
- Assy. / disassy. by qualified personnel required!
- Item number: 8EH 188 704-171
- Manufacturer: HELLA
- EAN number: 4082300325461
- Condition: New
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with gasket seat
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 4,5
- Thread Size: M14 x 1,25
- Item number: 5411
- Manufacturer: NGK
- EAN number: 0087295154113
- Condition: New
- Product line: LPG Laser Line
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Electrode Gap [mm]: 0,6
- Spanner Size: 20,8 mm
- Thread Size: M14 x 1,25
- Fuel Type: CNG / LPG
- Recommended change interval [km]: 60000
- Item number: 1497
- Manufacturer: NGK
- EAN number: 0087295114971
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Required quantity: 4
- Alternatively
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Quality / Grade: Poly-V Tit
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Thread Size: M14x1,25
- Connector type: SAE / M4
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Item number: UPT8
- Manufacturer: BERU
- EAN number: 4044197961153
- Condition: New
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Quality / Grade: Ti Poly-V
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: M4 / SAE
- Packing Type: Box
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Item number: CET8
- Manufacturer: CHAMPION
- EAN number: 4044197906833
- Condition: New
1.5 mm core nose projection
-
- TecDoc Engine Number: 170 B
- Required quantity: 4
- Product line: Nickel TT
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Spanner Size: 20.6 mm
- Thread Length [mm]: 19
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- alternative item: IW20, IW20TT, IW20
- Item number: W20TT
- Manufacturer: DENSO
- EAN number: 0042511046023
- Condition: New
-
- Construction Year to: 06 / 1990
- Required quantity: 4
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 0 242 235 663
- Manufacturer: BOSCH
- EAN number: 3165143134085
- Condition: New
-
- Required quantity: 4
- electrode gap to be set [mm]: 0,7
- Product line: ULTRA
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Thread Length [mm]: 19
- Thread Size: M14x1,25
- Connector type: SAE / M4
- Self-service suited packaging see parts list
- Technical Information Number: 14-7 DU
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Item number: Z11
- Manufacturer: BERU
- EAN number: 4014427000181
- Condition: New
-
- Required quantity: 4
- Alternatively
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Quality / Grade: Pt GE
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Technical Information Number: RN8WYPB3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2,5
- Packaging height [cm]: 2,5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Item number: CCH9804
- Manufacturer: CHAMPION
- EAN number: 37551009596
- Condition: New
1.5 mm core nose projection
-
- Construction Year to: 06 / 1990
- Required quantity: 4
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 686S0069P
- Manufacturer: RIDEX PLUS
- EAN number: 4069197952338
- Condition: New
- Product line: Nickel
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Spanner Size: 20.6 mm
- Thread Length [mm]: 19
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 9993410685100
- alternative item: -
- Item number: W9EP
- Manufacturer: DENSO
- EAN number: 0042511060050
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Construction Year to: 06 / 1990
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Item number: 686S0070P
- Manufacturer: RIDEX PLUS
- EAN number: 4069197911168
- Condition: New
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 1 - Earthed Electrode
- Electrode Gap [mm]: 0,7
- Construction Year to: 06 / 1990
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0011
- Manufacturer: VEMO
- EAN number: 4046001273643
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- electrode gap to be set [mm]: 0,6
- Construction Year to: 06 / 1990
- Product line: Q+, original equipment manufacturer quality
- Spark Plug: 3 - Earthed Electrode
- Electrode Gap [mm]: 0,9
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Item number: V99-75-0006
- Manufacturer: VEMO
- EAN number: 4046001250262
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Spark Plug: Silver Center Electrode
- Engine Code: 170B
- Electrode Gap [mm]: 0,70
- Spanner Size: 21 mm
- Thread Length 1 [mm]: 19
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 25
- Number of pins: 1
- Fuel Type: Petrol / Liquified Petroleum Gas (LPG), CNG
- Item number: 1332
- Manufacturer: BRISK
- EAN number: 8595001300355
- Condition: New
- Spark Plug: Nickel-Copper Center Electrode
- Engine Code: 170B
- Electrode Gap [mm]: 0,70
- Spanner Size: 21 mm
- Thread Length 1 [mm]: 19
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 25
- Number of pins: 1
- Fuel Type: Petrol
- Replace after km: 30000
- Item number: 1313
- Manufacturer: BRISK
- EAN number: 8595001303301
- Condition: New
price incl. 19% VAT
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Quality / Grade: Ti Poly-V
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: M4 / SAE
- Self-service suited packaging see parts list
- Packing Type: Blister Pack
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 20
- Packaging width [cm]: 10
- Packaging height [cm]: 3,2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Item number: CET8SB
- Manufacturer: CHAMPION
- EAN number: 4044197909582
- Condition: New
1.5 mm core nose projection
price incl. 19% VAT
excl. delivery costs
- Product line: Iridium Tough
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Length [mm]: 19
- Thread Size: M14x1.25
- Diameter [mm]: 14
- for OE number: MN119489
- Gross Weight [g]: 59
- alternative item: -
- Item number: VW20T
- Manufacturer: DENSO
- EAN number: 42511550209
- Condition: New
- Product line: Powersport
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Quality / Grade: Nickel GE
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: M4 / SAE
- Required quantity: 4
- Self-service suited packaging see parts list
- Packing Type: Box
- Technical Information Number: N9YC
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 11,1
- Packaging width [cm]: 4,65
- Packaging height [cm]: 1,25
- Projection [mm]: 1,5
- Item number: OE001/R04
- Manufacturer: CHAMPION
- EAN number: 5010874720176
- Condition: New
1.5 mm core nose projection
- 1
- 2
- 3
- 4