Chevrolet Camaro Convertible 3.6 Spark plug (316 hp Petrol LLT)
Recommended part replacement interval for your car for the part category Spark plug: every 10.000 km / every 18 months
-
- Construction Year to: 08 / 2011
- Required quantity: 6
- Electrode Gap [mm]: 1,2
- Spanner Size: 16 mm
- Thread Length [mm]: 25
- Spark Position [mm]: 4
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 15
- Number of pins: 1
- Item number: 0 242 236 591
- Manufacturer: BOSCH
- EAN number: 2230844586400
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
- Electrode Gap [mm]: 1,2
- Spanner Size: 16 mm
- Quality / Grade: Pt GE
- Thread Length [mm]: 25
- Spark Position [mm]: 3
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 6
- Packing Type: Box
- Technical Information Number: RES9WYPB4
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9,525
- Packaging width [cm]: 2,54
- Packaging height [cm]: 2,54
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Item number: CCH9901
- Manufacturer: CHAMPION
- EAN number: 37551011995
- Condition: New
1.5 mm core nose projection
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 25
- Spark Position [mm]: 3
- Construction Year to: 08 / 2011
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Item number: 0 242 236 629
- Manufacturer: BOSCH
- EAN number: 2230844587900
- Condition: New
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- External Thread [mm]: 14
- Thread Length [mm]: 25
- Spark Position [mm]: 3
- Construction Year to: 08 / 2011
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Item number: 0 242 236 617
- Manufacturer: BOSCH
- EAN number: 2230844587300
- Condition: New
- Fitting Position: Front Axle
- Brake System: Mando
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 141,9
- Item number: C1X039ABE
- Our price: 28,49 €
- Manufacturer: ABE
- EAN number: 5900427191129
- Condition: New
- Fitting Position: Front Axle
- Brake System: Mando
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 65,9
- Width [mm]: 142
- WVA Number: 24412, 24413, 24414
- Test Mark: R90 Homologated
- Weight [kg]: 2,185
- Quantity per axle: 1, 4
- Packing Type: Box
- Number of clips: 4
- Packaging length [cm]: 20,6
- Packaging width [cm]: 12,4
- Packaging height [cm]: 7,8
- Item number: FDB4208
- Our price: 45,49 €
- Manufacturer: FERODO
- EAN number: 4044197472352
- Condition: New
- Fitting Position: Front Axle
- Brake System: Mando
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 19
- Product line: Prime
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 62
- Width [mm]: 142
- WVA Number: 24412, 24413, 24414
- directional
- Item number: P 59 055
- Our price: 39,99 €
- Manufacturer: BREMBO
- EAN number: 8020584061596
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: internally vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 30
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Tightening Torque [Nm]: 150
- Item number: 09.A971.10
- Manufacturer: BREMBO
- EAN number: 8020584025833
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Construction Year from: 12 / 2012
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 67,4
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Inner Diameter [mm]: 160
- Rim Size [inch]: 17
- Bore Diameter [mm]: 16,3
- Item number: 25718
- Manufacturer: MAPCO
- EAN number: 4043605757319
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 51
- Minimum thickness [mm]: 27
- Number of mounting bores: 1
- Observe service information
- Item number: 39196
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816391968
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Height [mm]: 51
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Item number: O1030V
- Manufacturer: LPR
- EAN number: 8032928095341
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 30
- Height [mm]: 51
- Centering Diameter [mm]: 67,4
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Brake Disc Hub Height [mm]: 21
- Packaging width [cm]: 34
- Packaging height [cm]: 11
- Packaging Depth [cm]: 34
- Item number: V40-80008
- Manufacturer: VAICO
- EAN number: 4046001550454
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 321,0
- Construction Year from: 12 / 2012
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 51
- Centering Diameter [mm]: 67,4
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 160,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0255
- Bore Diameter [mm]: 16,3
- Item number: 24.0130-0209.1
- Manufacturer: ATE
- EAN number: 4006633333771
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Mando
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 19,1
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 66,7
- Width [mm]: 142,1
- WVA Number: 24412
- Weight [kg]: 2,24
- Article number of recommended accessories: 82503800
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2441201
- Our price: 53,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722288906
- Condition: New
- Brake System: Brembo
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 14
- Product line: Prime
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 4
- Height [mm]: 74
- Width [mm]: 120
- WVA Number: 23143
- Item number: P 09 003
- Our price: 79,49 €
- Manufacturer: BREMBO
- EAN number: 8020584090374
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: MANDO, MAN
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Length [mm]: 131,5
- Height [mm]: 59,6
- Item number: 1385.02
- Our price: 33,49 €
- Manufacturer: REMSA
- EAN number: 8427975031235
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19
- Product line: COTEC
- Quantity Unit: Axle Set
- Height [mm]: 59,6
- Width [mm]: 131,5
- Test Mark: E9 90R - 01107 / 2264
- Manufacturer Restriction: MANDO
- Item number: GDB1782
- Our price: 35,99 €
- Manufacturer: TRW
- EAN number: 3322937918393
- Condition: New
- Fitting Position: Front Axle
- Brake System: MANDO
- Thickness [mm]: 19,1
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 66,7
- Width [mm]: 142
- Item number: 05P1467
- Our price: 76,99 €
- Manufacturer: LPR
- EAN number: 8032928086141
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 30
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Tightening Torque [Nm]: 150
- Item number: 09.A971.11
- Manufacturer: BREMBO
- EAN number: 8020584025840
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Thickness [mm]: 16,5
- Quantity Unit: Axle Set
- Length [mm]: 137,5
- Height [mm]: 45,9
- WVA Number: 24546
- Test Mark: ECE R90 APPROVED
- for OE number: 20876917
- Item number: PP-007AF
- Our price: 59,99 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001777994
- Condition: New