• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Audi A3 8V7 35 TFSI Spark plug (150 hp Petrol DPCA)

Engine spark plug Audi A3 8V7 35 TFSI 150 Petrol Engine

Recommended part replacement interval for your car for the part category Spark plug: every 60.000 km / every 6 years

Manufacturers
Filter
5 items
686S0443 Spark plug Audi A3 35TFSI 150 hp 110 kW DADA 2018 8V7, 8VE Sample photo only RIDEX 686S0443 Spark plug AUDI A3 Convertible (8V7, 8VE) 35 TFSI 150 hp Petrol 2020 price
RIDEX 686S0443 Spark plug Spanner Size: 16 mm
Article number: 686S0443
Submit a review
  • Spark Plug: Ring type connector (cup-shaped), Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
  • Electrode Gap [mm]: 0,8
  • Spanner Size: 16 mm
  • External Thread [mm]: 12,0
  • Thread Length [mm]: 28,0
  • Spark Position [mm]: 2,5
  • Thread Pitch [mm]: 1,25
  • TecDoc Engine Number: DADA, DPCA
  • Item number: 686S0443
  • Manufacturer: RIDEX
  • EAN number: 4066423562064
  • Condition: New
Show OEM numbers of the product
Details
In stock
11,49 €

price incl. 19% VAT

excl. delivery costs

  • Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
  • Electrode Gap [mm]: 0,75
  • Spanner Size: 16 mm
  • Quality / Grade: Pt GE
  • Thread Length [mm]: 26,5
  • Spark Position [mm]: 2,55
  • Thread Size: M12x1.25
  • Connector type: Cup
  • Required quantity: 4
  • Packing Type: Box
  • Technical Information Number: KER4ZWPB-1
  • Tightening torque from [Nm]: 20
  • Tightening torque to [Nm]: 25
  • Shaft Length [mm]: 1,5
  • Packaging length [cm]: 9,2
  • Packaging width [cm]: 2,7
  • Packaging height [cm]: 2,5
  • Resistor from [kOhm]: 1
  • Resistor to [kOhm]: 2
  • Projection [mm] 0
  • Item number: OE273
  • Manufacturer: CHAMPION
  • EAN number: 4060426421045
  • Condition: New
Show OEM numbers of the product
Details
In stock
-21%
compared to RRP 14,23 €

11,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

Z520 Spark plug Audi A3 35TFSI 150 hp 110 kW DADA 2020 8V7, 8VE Sample photo only E6018814220A1 BERU Z520 Spark plug AUDI A3 Convertible (8V7, 8VE) 35 TFSI 150 hp Petrol 2018 price
BERU Z520 Spark plug M12x1.25, Spanner Size: 16mm
Article number: Z520
Submit a review
  • Electrode Gap [mm]: 0,75
  • Spanner Size: 16mm
  • Thread Length [mm]: 28
  • Thread Size: M12x1.25
  • Tightening torque from [Nm]: 20
  • Tightening torque to [Nm]: 25
  • Resistor from [kOhm]: 1
  • Resistor to [kOhm]: 3
  • Packaging length [cm]: 9
  • Packaging height [cm]: 2
  • Packaging width [cm]: 2
  • Item number: Z520
  • Manufacturer: BERU
  • EAN number: 4014427179962
  • Condition: New
Show OEM numbers of the product
Details
In stock
11,49 €

price incl. 19% VAT

excl. delivery costs

  • Spark Plug: Ring type connector (cup-shaped), Iridium Middle Electrode, 1 - Earthed Electrode, with gasket seat
  • Electrode Gap [mm]: 0,8
  • Spanner Size: 16 mm
  • Thread Length [mm]: 28,0
  • Spark Position [mm]: 2,5
  • Thread Pitch [mm]: 1,25
  • Thread Size: M12 x 1,25
  • Resistor [kOhm]: 1,4
  • TecDoc Engine Number: DADA, DPCA
  • Interference suppressed
  • Item number: 95929
  • Manufacturer: NGK
  • EAN number: 87295959299
  • Condition: New
Show OEM numbers of the product
Details
In stock
-49%
compared to RRP 29,63 €

15,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Electrode Gap [mm]: 0,75
  • Spanner Size: 16 mm
  • Thread Length [mm]: 26,5
  • Spark Position [mm]: 4
  • Thread Size: M 12 x 1,25
  • Connector type: Napf
  • Required quantity: 4
  • Tightening Torque [Nm]: 23
  • Number of pins: 1
  • Item number: 0 241 145 525
  • Manufacturer: BOSCH
  • EAN number: 4047023075321
  • Condition: New
Show OEM numbers of the product
Details
In stock
-44%
compared to RRP 29,87 €

16,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

AUDI A3 Convertible (8V7, 8VE) 35 TFSI Bestsellers
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZD
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: 25833
  • Manufacturer: MAPCO
  • EAN number: 4043605415516
  • Condition: New
Show OEM numbers of the product
Details
In stock
38,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

ABE C4W014ABE Brake disc Rear Axle, 310x22mm, 9x112, Vented
Article number: C4W014ABE
Submit a review
  • Fitting Position: Rear Axle
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,3
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Thread Size: 15,5
  • Item number: C4W014ABE
  • Manufacturer: ABE
  • EAN number: 5900427206786
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
56,49 €
Price per item

price incl. 19% VAT

free delivery

DELPHI BG3953 Brake disc Front Axle, 312x25mm, 5, Vented
Article number: BG3953
Submit a review
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZD
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Test Mark: E1 90R-02C0277 / 1198
  • Item number: BG3953
  • Manufacturer: DELPHI
  • EAN number: 5012759360545
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
126,49 €

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • for PR number: 1ZE, 1ZP
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Item number: A1002V
  • Manufacturer: LPR
  • EAN number: 8032532092255
  • Condition: New
Show OEM numbers of the product
Details
In stock
27,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 272
  • for PR number: 1KE, 1KR
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48,3
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,3
  • Item number: 0 986 479 677
  • Manufacturer: BOSCH
  • EAN number: 4047024749801
  • Condition: New
Show OEM numbers of the product
Details
In stock
-65%
compared to RRP 79,85 €

27,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

Packaging Type: Old
  • Fitting Position: Rear Axle
  • Diameter [mm]: 272
  • for PR number: 1KE
  • Brake Disc Type: solid
  • Drilled: no
  • Supplementary Info: Original VAICO Quality
  • Brake Disc Thickness [mm]: 9,7
  • Height [mm]: 48,2
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • Brake Disc Hub Height [mm]: 38,2
  • Packaging width [cm]: 28
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 28
  • Item number: V10-40086
  • Manufacturer: VAICO
  • EAN number: 4046001550584
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
23,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • for PR number: 1ZA, 1ZD
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-61%
compared to RRP 156,13 €

59,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Paired product: FDB4434
  • Diameter [mm]: 272
  • for PR number: 1KE, 1KR
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Oiled
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 9
  • Weight [kg]: 6,2
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Packing Type: Box
  • Packaging length [cm]: 27,5
  • Packaging width [cm]: 27,5
  • Packaging height [cm]: 10,5
  • Item number: DDF1895
  • Manufacturer: FERODO
  • EAN number: 4044197541324
  • Condition: New
Show OEM numbers of the product
Details
In stock
-66%
compared to RRP 75,31 €

25,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZD
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Item number: C3W039ABE
  • Manufacturer: ABE
  • EAN number: 5901655214055
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
52,99 €
Price per item

price incl. 19% VAT

free delivery

LPR A1004V Brake disc Front Axle, 312x25mm, 5
Article number: A1004V
Reviews - 1
  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZD
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • for article number: A1004V
  • Item number: A1004V
  • Manufacturer: LPR
  • EAN number: 8032532102671
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
41,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 312
  • for PR number: 1ZA, 1ZD
  • Brake Disc Type: Vented
  • Drilled: no
  • Supplementary Info: ORIGINAL Quality
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Required quantity: 2
  • Item number: 115 521 1094
  • Manufacturer: MEYLE
  • EAN number: 4040074429006
  • Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to RRP 140,05 €

42,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Item number: BDC5416
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438069259
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-52%
compared to RRP 120,07 €

56,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Item number: BDC5418
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5016593840775
  • Condition: New
Show OEM numbers of the product
Details
In stock
-54%
compared to RRP 94,37 €

42,99 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Diameter [mm]: 310,0
  • for PR number: 1KJ, 1KY, 1KZ
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Vehicle Equipment: for vehicles with electric parking brake
  • Brake Disc Thickness [mm]: 22,0
  • Height [mm]: 48,5
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 20,0
  • Inner Diameter [mm]: 169,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0118 / 0945
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0122-0219.1
  • Manufacturer: ATE
  • EAN number: 4006633229630
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-58%
compared to RRP 143,28 €

59,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • for PR number: 1ZE, 1ZP
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Coated
  • Machining: High-carbon
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 0010
  • Bore Diameter [mm]: 15,3
  • Item number: 24.0125-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633113472
  • Condition: New
Show OEM numbers of the product
Details
In stock
-61%
compared to RRP 126,62 €

49,49 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on