Clutch kit Fiat Punto Mk2
Buy Clutch set FIAT PUNTO (188)
Most popular products: Clutch and flywheel kit the FIAT PUNTO (188) buy online to reduce replacement cost
Top-selling parts for the FIAT PUNTO in the category Clutch kit. Choose a high-quality part from the Clutch replacement kit section for your FIAT 188 PUNTO
RIDEX 479C0051 Clutch kit
three-piece, with clutch pressure plate, with clutch release bearing, with clutch disc, 190mm
RIDEX 479C0005 Clutch kit
three-piece, with clutch release bearing, 190mm
RIDEX 479C0164 Clutch kit
three-piece, with clutch pressure plate, with clutch disc, 230mm
VALEO 837039 Clutch kit
with dual-mass flywheel, with flywheel screws, with lock screw set, with clutch release bearing, 230mm
VALEO 786034 Clutch kit
with clutch release bearing, 190mm
VALEO 826522 Clutch kit
with clutch release bearing, Special tools for mounting not necessary, 200mm
LuK R442MK Clutch kit
with clutch release bearing, with clutch disc, 180mm
SACHS 3000 951 044 Clutch kit
180mm
LuK 600 0216 00 Clutch kit
without pilot bearing, with clutch release bearing, with flywheel, with screw set, Dual-mass flywheel without friction control plate
STATIM 100.264 Clutch kit
215mm
SACHS 2290 601 078 Clutch kit
with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with clutch disc, with clutch release bearing, 230mm
LuK 619 3004 00 Clutch kit
with clutch release bearing, with clutch disc, 190mm
LuK 623 3785 00 Clutch kit
with clutch release bearing, 230mm
KAWE 961571 Clutch kit
with clutch pressure plate, with clutch disc, with clutch release bearing, 190 CP
RYMEC JT1230 Clutch kit
three-piece, with clutch release bearing, 200mm
STATIM 100.256 Clutch kit
200mm
STARK SKCK-0100069 Clutch kit
with clutch pressure plate, with clutch disc, with clutch release bearing, 200mm
STATIM 100.266 Clutch kit
with bearing(s), with release plate, with clutch disc
SACHS 3000 951 531 Clutch kit
230mm
STARK SKCK-0100004 Clutch kit
three-piece, with clutch release bearing, 190mm
Clutch set: parts for the most common versions of the FIAT Punto II Hatchback (188)
Confidence in online shopping! You can return Fiat Punto Mk2 clutch kit without explanation within 200 days after purchase and get your money back. How? Just use the Safe Order service on the checkout page. The service cost is only 2,99 €.
Each order from 100 € value of goods, include free shipping within Germany.
*Does not apply to large-size auto parts.
Clutch kit the FIAT PUNTO (188) – information on part operation, installation, diagnostics, and service intervals
In order to avoid cracking and deformation of the parts, the fastening bolts of the clutch cover to the flywheel should be unscrewed according to the certain layout. To see it, service station specialists usually refer to the vehicle technical documentation.
During installation of the clutch kit on the FIAT PUNTO (188) car it is important to avoid ingress of dust, dirt and oil on the friction linings of the component, as this increases abrasive wear-out of contacting surfaces thus lowering clutch efficiency.
In the process of work, it is very important to control the proper position of the centering arbor, otherwise difficulties can occur at gearbox installation.
If the clutch release bearing has a metal sleeve, its guide should be treated with special greasing compound, and excessive grease is removed. As for plastic sleeve, grease is not necessary. A spline part of the gearbox input shaft also should be greased before installation of the clutch disk.
During installation of the clutch on the FIAT PUNTO (188) car you need to check condition of the engine and gearbox gaskets, and replace them if they are leaking. Otherwise operability of the clutch can be violated due to oiling of the friction linings.
Surface of the engine and clutch pressure plate should be de-oiled using a special agent, and then wiped with a dry clean cloth, in order to ensure reliable contact of the parts.
The fastening bolts should be tightened with the certain torque indicated in the technical documentation. It is also recommended to replace them at installation of a new clutch kit.
AUTODOC recommends you to necessarily perform the following actions after replacement of clutch kit on FIAT PUNTO (188) car
Check tightness of hydraulic clutch actuation system on the FIAT PUNTO (188) car, check the level of brake fluid in the tank. Top it up to the needed level if necessary, and then bleed air from the clutch actuation system. Defectiveness of the hydraulic actuator can become the cause of incomplete disengagement of the clutch, which leads to abrasion and burning-out of the friction linings.
Adjust the pedal travel according to the instructions provided by the car manufacturer in the FIAT PUNTO (188) car technical documentation. Due to excessive travel, the clutch fails to disengage completely, due to insufficient travel – undergoes high loads, which reduces lifetime of the unit.