It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Nut, Tyre pressure sensor (tpms), Repair kit, Wheel sensor (tyre pressure control system) 400011621R
All spare parts in the list below are equivalent to OEM number 40 00 116 21R:
- 40 00 116 21R (original number of RENAULT)
- Pressure to [bar]: 9
- Supplementary Article / Supplementary Info Info 2: with pressure sensor, with integrated air temperature sensor, with valves, with screw
- Supplementary Article / Supplementary Info: with battery
- Colour: grey
- Weight [g]: 36
- Material: Elastomer
- Frequency Range [MHz]: 433, 434
- Article number of the recommended special tool: 95990021
- only in connection with: 95990021
- Number of bolts / screws: 1
- Supported by: De-Minimis
- Valve colour: black
- Number of valves: 1
- Power Consumption [W]: 0,001
- Item number: 70699434
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736402563
- Condition: New
- Reference number OEM: 400011621R
Herth+Buss wheel sensors can be used in all vehicles This snap-in wheel sensor can be installed in both light alloy rims and steel rims and can be activated that have a tyre pressure monitoring system installed as standard.The programming device AirGuard 95990001/- wirelessly. Please note that the permissible maximum 021 is required for the programming and adjustment of speed is restricted to 210 km/h. Supplied with a rubber valve. the sensors of each vehicle. This process only takes
between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, and can be used in aluminium and steel rims. The sensors can be ordered individually and are supplied with a complete valve. A replacement valve is also available. • one for all: optimum stockage with just one universal wheel sensor • for steel or aluminium rims • certification up to 210 km/h • battery service life: 3-7 years • only programmable in connection with AirGuard 95990001/-021
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Pressure to [bar]: 9
- Tightening torque to [Nm]: 4
- Supplementary Article / Supplementary Info Info 2: with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw
- Supplementary Article / Supplementary Info: with battery
- Information Transfer: Radio
- Weight [g]: 46
- Material: Aluminium
- Article number of the recommended special tool: 95990021
- only in connection with: 95990021
- Number of bolts / screws: 1
- Frequency Range [MHz]: 433, 434
- Supported by: De-Minimis
- Valve colour: silver
- Number of valves: 1
- Lithium weight [g]: 0,1
- Item number: 70699443
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736415365
- Condition: New
- Reference number OEM: 400011621R
Herth+Buss wheel sensors can be used in all vehicles that have a tyre pressure monitoring system installed as standard. The programming device AirGuard 95990001/- 021 is required for the programming and adjustment of the sensors of each vehicle. This process only takes between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, used in aluminium and steel rims and wirelessly activated. The sensors can be ordered individually and are supplied with the complete valve in standard silver. A valve repair kit is also available, as are replacement valves in silver and black. • one for all: optimum stockage with just one universal wheel sensor • valves with adjustable angles • for steel or aluminium rims • certification up to 250 km/h • battery service life: 3-7 years • only programmable in connection with AirGuard 95990001/-021
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5004
- Weight [kg]: 0,016
- Packaging width [cm]: 4
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Product line: EXPERT KITS +
- Item number: V99-72-5004
- Manufacturer: VEMO
- EAN number: 4046001654596
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5007
- Weight [kg]: 0,02
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5007
- Manufacturer: VEMO
- EAN number: 4046001654626
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5010
- Weight [kg]: 0,014
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5010
- Manufacturer: VEMO
- EAN number: 4046001654657
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5008
- Weight [kg]: 0,017
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5008
- Manufacturer: VEMO
- EAN number: 4046001654633
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: EXPERT KITS +
- for article number: V99-72-5005
- Weight [kg]: 0,019
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5005
- Manufacturer: VEMO
- EAN number: 4046001654602
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5006
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5006
- Manufacturer: VEMO
- EAN number: 4046001654619
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5009
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5009
- Manufacturer: VEMO
- EAN number: 4046001654640
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5011
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5011
- Manufacturer: VEMO
- EAN number: 4046001654664
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5012
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5012
- Manufacturer: VEMO
- EAN number: 4046001654565
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for article number: V99-72-5013
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5013
- Manufacturer: VEMO
- EAN number: 4046001654589
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Q+, original equipment manufacturer quality
- for OE number: 52934-A5000
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Weight [kg]: 0,006
- Recommended change interval [years]: 5
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5002
- Our price: 6,73 €
- Manufacturer: VEMO
- EAN number: 4046001653667
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Rims: for steel rims, for light alloy rims
- Frequency Range [MHz]: 433
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Weight [kg]: 0,048
- Supplementary Info: Original VEMO Quality
- Observe the vehicle manufacturer specifications
- Packaging width [cm]: 6,8
- Packaging height [cm]: 3, 9,2
- Packaging Depth [cm]: 9, 7,4
- Item number: V99-72-4001
- Manufacturer: VEMO
- EAN number: 4046001615948
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Pressure to [bar]: 9
- Tightening torque to [Nm]: 4
- Supplementary Article / Supplementary Info Info 2: with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw
- Supplementary Article / Supplementary Info: with battery
- Information Transfer: Radio
- Weight [g]: 46
- Material: Aluminium
- Article number of the recommended special tool: 95990021
- only in connection with: 95990021
- Number of bolts / screws: 1
- Frequency Range [MHz]: 433, 434
- Supported by: De-Minimis
- Valve colour: anthracite
- Number of valves: 1
- Item number: 70699444
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736415358
- Condition: New
- Reference number OEM: 400011621R
Herth+Buss wheel sensors can be used in all vehicles that have a tyre pressure monitoring system installed as standard. The programming device AirGuard 95990001/- 021 is required for the programming and adjustment of the sensors of each vehicle. This process only takes between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, used in aluminium and steel rims and wirelessly activated. The sensors can be ordered individually and are supplied with the complete valve in standard silver. A valve repair kit is also available, as are replacement valves in silver and black. • one for all: optimum stockage with just one universal wheel sensor • valves with adjustable angles • for steel or aluminium rims • certification up to 250 km/h • battery service life: 3-7 years • only programmable in connection with AirGuard 95990001/-021
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Supplementary Article / Supplementary Info Info 2: with valves, with screw
- Frequency Range [MHz]: 433
- Full Set
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Valve stem material: Aluminium
- Weight [kg]: 0,025
- for OE number: 52933-1J000
- Supplementary Info: EXPERT KITS +
- Observe the vehicle manufacturer specifications
- pre-programmed
- Item number: V52-72-0230
- Manufacturer: VEMO
- EAN number: 4046001896101
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Supplementary Article / Supplementary Info Info 2: with valves, with screw
- Frequency Range [MHz]: 433
- Full Set
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Valve stem material: Aluminium
- for OE number: 40 00 126 31R
- Supplementary Info: EXPERT KITS +
- Observe the vehicle manufacturer specifications
- Item number: V46-72-0194
- Manufacturer: VEMO
- EAN number: 4046001895975
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: ZVAD009
- Manufacturer: ZZVF
- EAN number: 2000000007045
- Condition: New
- Reference number OEM: 400011621R
- Supplementary Info: EXPERT KITS +
- for article number: V99-72-5003
- Weight [kg]: 0,017
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5003
- Manufacturer: VEMO
- EAN number: 4046001654572
- Condition: New
- Reference number OEM: 400011621R
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.