Ford S-Max Mk1 2.5 ST Ignition coil (220 hp Petrol HUWA)

PLUG TOP COILS Recommendation - Due to operating time and Recommendation: Use grease for spark plug adaptors (ZKF 01
-
aging, the spark plug connector becomes brittle and thus reference No. 0 890 300 029),see accessories lists. untight in the sealing area of the spark plug, which may cause misfiring.1. Switch off the ignition. Wait for 15 min before demounting the ignition coil.This prevents voltage peaks that could destroy control devices.2. Remove the defective coil. 3. Apply a thin film of BERU spark plug connector grease ZKF 01(order no. 0 890 300 029) into the inner part of theconnector. 4. Attach the spark plug connector to the coil. 5. Mount the coil with the connector on the spark plug(heed the tightening torque). 6. Check the primary connector contacts for oxidation andclean it, if required.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.