VIGOR V4680 Mounting Tool Set, wheel hub / wheel bearing Number of tools: 15

VIGOR Compact wheel bearing removal / installation set ∙ •Adjustability guarantees use of all types of current and future compact wheel bearings available on the market V4680 ∙ Number of tools: 15

•Including multibox

•Maximum loading capacity: 22 tonnes

•Use with hydraulic cylinder, mechanical spindle or workshop press

•E.g. on:

•VW: Polo ∙ Lupo ∙ Touareg ∙ Fox ∙ T5 front and rear ∙ Crafter

•AUDI: A2

•SEAT: Ibiza, Córdoba

•ŠKODA: Fabia, Rapid, Roomster

•FORD: Focus, C-Max, Mondeo, S-Max, Kuga

•LANDROVER: Freelander 2

•MAZDA: 3 ∙ 5 ∙ 6 ∙ CX-7

•MERCEDES-BENZ: Sprinter, Vito, Viano

•MITSUBISHI: Colt

•SMART: Forfour

•Volvo: V50 ∙ S40 ∙ V70 ∙ S80 ∙ XC60

•Other models

•CITROËN: Jumpy (Dispatch), Space Tourer

•PEUGEOT: Expert, Traveller

•TOYOTA: ProAce (Verso)





•Lightweight plastic box

•Maximum loading capacity: 90 kg

•Modular system

•Interlocking modular tool system! As the base component, the crossbar can be used universally and combined with all pressure feet from the VIGOR product range. The crossbar is additionally equipped with an inside thread so that the cylinder can be screwed in to be able to carry out printing work (e.g. pressing out the drive shaft). The width of all pairs of installation and removal pressure feet can be individually adjusted and adapted on the crossbar. This flexibility, in combination with the correct pair of pressure feet, guarantees a universal tool set for all wheel bearing types currently available on the market

The recesses of the pressure pieces are specially designed to protect the ABS sensorDesign of compact wheel bearingCompact wheel bearings are also known as generation 2.1 wheel bearings. They have a flange, which is shaped as a wheel hub. The wheel bearing is a compact unit and cannot be split. The Generation 2.1 wheel bearing has a rotating internal or external ring and a locking ringInstallation/removalDue to the rotating internal ring of the wheel bearing, professional installation must only be carried out via the outer ring of the bearing. A suitable tool is required in order to avoid damaging the bearing. Only a few components of our system are required for installing and removing the compact wheel bearingGeneration 2 pressed wheel bearings with integrated wheel hub, also known as HBU 2.1 or compact wheel bearings, have been used in vehicles since 2002 and are now installed in most vehicle brands and sizes. Proper installation can only be ensured by transferring power to the bearing. Compact wheel bearings are available in diameters ranging from 62 to 94 mm

•Insert measurement / drawer size: M (282 x 393 mm)