KS TOOLS Voltage testers

Bit box display, 280 pcs, 1/4" •PH

•external hexagon drive to DIN 3126 / ISO 1173 - C 6,3

•can be used by hand or with an electric screwdriver

•ideally suited for fittings in trade and industry

•nickel plated

•special tool steel

3/8" Torque wrench with rotary mushroom ratchet head, 5 - 50 •More precise than the DIN/ISO standard

Nm •+/- 3% trigger accuracy

•Fine adjustment

•Precise reading accuracy for a minimum of 5,000 tightening cycles

•For controlled fastening in a clockwise direction

•Can untighten without any torque restraint due to the anticlockwise latch

•Double scale in Nm and lbf•ft divisions for precise adjustment

•Includes micrometer scale with Nm divisions for precise fine adjustment

•Large vision panel with the magnifying function optimises the readability

•Quick-trigger mechanism produces a clear audible and tangible signal to indicate torque triggering

•With exact gearing 36-teeth ratchet mechanism

•Torque setting is quick and easy by turning the handle

•Secure locking function within the handle

•Two-component handle with a soft zone, is ergonomic in design and comfortable in the hand

•Square drive in accordance with DIN 3120 - ISO 1174 with ball lock

•including calibration declaration of conformity according to DIN EN ISO 6789:3203 - traceable to national standards



With this BRILLIANT TOOLS professional torque wrench BT141902, bolts, screws and nuts can be tightened in a controlled manner. Its application possibilities are very versatile. The exact setting of the desired torque is extremely simple and is easy to read on the scale integrated into the handle. Fine adjustments, thanks to the micrometre scale, can also be performed. This allows you to implement values such as 122 Nm. To adjust a setting, just undo the lock in the handle and turn it to the desired value, then lock it again. A wide variety of work on cars and vans can be done in the torque range between 60 - 320 Nm. The trigger mechanism, easy to hear and feel, signifies that the set torque has been reached. Its 1/2" head can be reset, making it suitable for right and left handed threads. The robustness and reliability of this professional torque wrench has proven its worth for professional mechanics over many years and is therefore ideal for hobby mechanics with very high demands on their tool.

Bit box display, 280 pcs, 1/4"

12V Battery-, charging- and starting system analyzer •for checking ignition systems

•no damage to control devices due to earth connection

•universal usage

•on vehicles with DIS ignition systems 2 pieces are required

Test lamp for ignition cable •test tip protected through a cap

•ideal for helping to locate short circuits and breaks

•with shielded crocodile clamp

•stainless steel probe

•brass housing and cap

Test spark plug •for quickly finding defective ignition cables

•no piercing of the insulation, prevents contact with live wires

•correct operation of the ignition cable is indicated by a light

Tension tester with protection insulation two-pole 12-1000 V •tested and accredited in accordance with international standard

•insulated to IEC IEN 61243-3 (DIN VDE 0682-401)

•voltage class B

•DC and AC voltage shown by LED indicators

•rotary field and phase display via LCD

•single-pole external conductor test (phase)

•rotating field test

•polarity test

•deliberate tripping of a 30 mA ELCB

•with vibration alarm

VDE round pliers, 170 mm •Based on DIN ISO 5748

•Wrap around insulation according to IEC 60900

•2-component handle

•Induction-hardened precision cutting edges



With the BRILLIANT TOOLS VDE diagonal side cutter BT068014 you can carry out work in the voltage range up to 1000 V without any problems. The cutting edges are induction-hardened for a long life time. The 16.8 cm long wire stripper is ideal for stripping wires with a thickness of 0.8 mm to 6.0 mm. The cutting depth can be infinitely adjusted via a knurled screw. The wire stripper is provided with wrap around insulation according to IEC 60900. This means it cannot conduct electricity. The ergonomic 2-component handle and the optimised transmission ensure fatigue-free, smooth-running working and thus maximum ergonomics.

Bit box display, 280 pcs, 1/4"

Voltage tester with protective insulation, two-pole, with •tested and accredited in accordance with international audible alarm, 12 – 1000 V standard

•insulated to IEC EN 61243-3 (DIN VDE 0682-401)

•voltage class CAT IV / 1000 V

•test probes IP2X protection class

•DC and AC voltage shown by LED indicators

•single-pole external conductor test (phase)

•polarity test

•continuity test (< 80 Ω)

•with audible alarm

•built-in self-test

•includes 2 AAA 1,5 V batteries

Plastic expansion wedge, 160mm •for working enviroment of voltages AC 1000 V and DC 1500 V

•without flute

•made from impact resistant plastic