KS TOOLS Socket wrenches

CHROMEplus Open double ring spanner, 1/4"x5/16"

Double ring spanner, offset, 20 mm •6-point

•Head 90° offset

•Short side drilled

•Spanner width 19 mm



The BRILLIANT TOOLS double-ended box spanner BT015019 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 21.8 cm and a head diameter of 25.7 mm.

Double ring spanner, offset, 21 mm •6-point

•Head 90° offset

•Short side drilled

•Spanner width 20 mm



The BRILLIANT TOOLS double-ended box spanner BT015020 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 23 cm and a head diameter of 30.7 mm.

Double ring spanner, offset, 22 mm •6-point

•Head 90° offset

•Short side drilled

•Spanner width 21 mm



The BRILLIANT TOOLS double-ended box spanner BT015021 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 24.1 cm and a head diameter of 30.7 mm.

Double ring spanner, offset, 23 mm •6-point

•Head 90° offset

•Short side drilled

•Spanner width 22 mm



The BRILLIANT TOOLS double-ended box spanner BT015022 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 25.2 cm and a head diameter of 30.7 mm.

Double ring spanner, offset, 24 mm •6-point

•Head 90° offset

•Short side drilled

•Spanner width 23 mm



The BRILLIANT TOOLS double-ended box spanner BT015023 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 26.5 cm and a head diameter of 33.2 mm.

Double ring spanner set, 10 pcs •6-point

•Head 90° offset

•Short side drilled

•Spanner width 24 mm



The BRILLIANT TOOLS double-ended box spanner BT015024 is drop-forged out of chrome vanadium steel and then hardened. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. This spanner is particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. The spanner has an overall length of 27.5 cm and a head diameter of 33.2 mm.

Scaffolding wrench, 19 x 22 mm •10-piece set

•6-point

•Head 90° offset

•8 – 19 mm



The 10-piece BRILLIANT TOOLS pipe head box wrench set BT015100 is drop-forged out of chrome vanadium steel, then hardened and is a tried-and-tested assortment of pipe head box wrenches. The metric double-ended box spanner is offset by 90° on one end for easy working even in deep-lying areas. The surface is plated with chrome for better rust protection and manufactured according to DIN 838, so that it fits especially well in the hand. These spanners are particularly suitable for stud bolts and deep-lying nuts. The short end is drilled for the insertion of tommy bars. Contents: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 16 mm, 17 mm, 18 mm, 19 mm

Wobble extension set 1/4" + 3/8" + 1/2", 9 pcs •Spanner width 19 x 22 mm

•Reversible for clockwise and anti-clockwise rotation

•Toothed with 32 teeth

•Made of chrome vanadium steel



The BRILLIANT TOOLS scaffolding wrench BT016001 can be used for all collar nuts used in scaffolding construction. The spanner is equipped with sizes 19 and 22 mm and can be easily switched for clockwise and anti-clockwise rotation. It has an overall length of 31.5 cm. The double socket has a through-hole for working over threaded rods. The handle tapering to a point is ideal for screwing in scaffolding eyelets and eyebolts, or for aligning pins and pulling in planks. The handle has a hole and is therefore ideal for a snap hook.

•9-piece set

•Square socket to DIN 3120/ISO 1174 with ball catching groove

•Wobble extension with ball interlock

•Tilt angle 8°

•Made of high-quality chrome vanadium steel for a particularly long service life

•Matt finish chrome-plated



The BRILLIANT TOOLS tilt extension set BT020009 contains 9 different extensions in a wide range of lengths. Square socket is manufactured according to DIN 3120 / ISO 1174 with a ball catching groove. The tilt angle is 8°. The flexible connection can also be changed to a rigid connection at any time by pressing the extension and socket further together. With these extensions, any originally rigid ratchet-socket spanner connection becomes a flexible connection that can be easily tilted in all directions. However, the power transmission is not reduced. Work even more flexibly, cleanly and faster with your new tilt extensions.

Contents: 1x each1/4" (6.3 mm), length 50 mm1/4" (6.3 mm), length 10 cm1/4" (6.3 mm), length 25 cm 1x each3/8" (10 mm), length 75 mm3/8" (10 mm), length 15 cm3/8" (10 mm), length 25 cm 1x each1/2" (12.5 mm), length 50 mm1/2" (12.5 mm), length 12.5 cm1/2" (12.5 mm), length 25 cm

•23-piece set 1/4” (6.3 mm)

•Ratchet with 12 hexagonal sockets, 8 bits and accessories

•each manufactured according to DIN

•Tool made of high-quality chrome vanadium steel for particularly long service life

•Matt chrome



The 23-piece BRILLIANT TOOLS socket spanner set BT020023 is manufactured according to DIN. The entire set has a 1/4” (6.3 mm) square drive. It comes in a practical case with metal hinges and fasteners with moulded tool holders. The labels inside the case enable the right inserts or bits to be found quickly. The 2-component reversible ratchet has right/left hand rotation with lever switch and a backswing angle of 5°. It is fine-toothed with 72 teeth.

The 12 metric hexagonal sockets have spanner widths of 4 mm
- 13 mm. The total 8 bits are PH, PZ and TX. An extension
and bit adapter 1/4” (6.3 mm) are also enclosed. The surface is plated with matt chrome. Contents: 1/4” 2-component reversible ratchet fine-toothed, 72 teeth, 15 cm1/4" hexagonal sockets, short version: 4 mm, 4,5 mm, 5 mm, 5,5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm1/4” Phillips bits PH: PH1, PH21/4" Phillips bits PZ: PZ1, PZ21/4" TORX bits TX: T15, T20, T25, T301/4” socket spanner extension: 10 cm1/4" bit adapter

Repair set for BT020799 •46-piece set 1/4” (6.3 mm)

•Ratchet with 13 hexagonal sockets, 20 bit sockets and accessories

•Each manufactured according to DIN

•Tool made of high-quality chrome vanadium steel for particularly long service life

•Matt chrome



The 46-piece BRILLIANT TOOLS socket spanner set BT020046 is manufactured according to DIN. The entire set has a 1/4” (6.3 mm) square drive. It comes in a practical case with metal hinges and fasteners with moulded tool holders. The labels inside the case enable the right inserts or bits to be found quickly. The 2-component reversible ratchet has right/left hand rotation with lever switch and a backswing angle of 5°. It is fine-toothed with 72 teeth. The 13 metric hexagonal sockets have spanner widths of 4 mm
- 14 mm. A 10 cm extension and 1/4" (6.3 mm) bit adapter are
also enclosed. The T-handle with slider is 11.5 cm long. The surface is plated with matt chrome. Contents: 1/4” 2-component reversible ratchet fine-toothed, 72 teeth, 11 cm1/4" square driver, 15 cm1/4" hexagonal sockets, short version: 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm,1/4" bit hexagonal socket: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm1/4" bit socket slotted: 4 mm, 5.5 mm, 7 mm1/4" bit socket Phillips PH: PH1, PH2, PH31/4" bit socket Phillips PZ: PZ1, PZ2, PZ31/4" TORX bit socket: T10, T15, T20, T25, T30, T401/4” socket spanner extension: 10 cm1/4" flexible socket spanner extension: 15 cm1/4” T-handle with slider: 11 cm1/4" universal jointBit adapter 1/4" square x 1/4" hexagonalOffset screwdriver set, hexagonal: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm

1/4" PZ Pozdriv bit socket, PZ0 •Manufactured according to DIN 3120

•1/4” square drive (6.3 mm)

•Made of high-quality chrome vanadium steel for particularly long service life

•Matt chrome

•Phillips profile PZ0



The BRILLIANT TOOLS PZ Phillips bit socket BT020800 has a 1/4” (6.3 mm) square drive manufactured according to DIN 3120. The press-fitted, phosphated bit with Phillips profile is size PZ0 (Pozidriv). The bit socket has a total length of 38 mm, the blade length is 17 mm. The surface is plated with matt chrome on the drive side and on the bit side, which are separated by lengthwise knurling.

CHROMEplus Open double ring spanner, 1/4"x5/16" •6 point

•according to DIN 3118

•jaw 15° offset

•opening 15° cranked

•mirror polished

•chrome vanadium

1/4" PZ Pozdriv bit socket, PZ2 •Manufactured according to DIN 3120

•1/4” square drive (6.3 mm)

•Made of high-quality chrome vanadium steel for particularly long service life

•Matt chrome

•Phillips profile PZ2



The BRILLIANT TOOLS PZ Phillips bit socket BT020802 has a 1/4” (6.3 mm) square drive manufactured according to DIN 3120. The press-fitted, phosphated bit with Phillips profile is size PZ2 (Pozidriv). The bit socket has a total length of 38 mm, the blade length is 17 mm. The surface is plated with matt chrome on the drive side and on the bit side, which are separated by lengthwise knurling.

ULTIMATEplus Double box spanner with go through centre, 7mm on hang tag

ULTIMATEplus Double box spanner with go through centre, 7mm on hang tag

ULTIMATEplus Double box spanner with go through centre, 7mm on hang tag

ULTIMATEplus Double box spanner with go through centre, 7mm on hang tag

1/4" PZ Pozdriv bit socket, PZ3 •Manufactured according to DIN 3120

•1/4” square drive (6.3 mm)

•Made of high-quality chrome vanadium steel for particularly long service life

•Matt chrome

•Phillips profile PZ3



The BRILLIANT TOOLS PZ Phillips bit socket BT020803 has a 1/4” (6.3 mm) square drive manufactured according to DIN 3120. The press-fitted, phosphated bit with Phillips profile is size PZ3 (Pozidriv). The bit socket has a total length of 38 mm, the blade length is 17 mm. The surface is plated with matt chrome on the drive side and on the bit side, which are separated by lengthwise knurling.