HAZET Sheet metal shears

Application: HAZET Air nibbler 9036N-1 Ideal for cutting small radii (min. 4.5 mm). Also suitable for cutting plastic

•Continuous speed regulation via speed regulator on back of handle

•Cutting capacity: steel 1.2 mm / aluminium 1.6 mm

•Cutting width: 4.5 mm

•Air connection inlet: Inside thread 12.91 mm (1/4″)

•Coupler plug: Nominal size 7.2 (included)

•Hose diameter (recommended): 10 mm

•Working pressure (bar): 6.3

•Sound power level: 87 db(A) Lp W

•Vibration acceleration: 1.90 m/s2

•Power in watts: 370 Watt

•Cold insulated handle

•Dimensions / length: 185 mm

•Net weight: 1 kg

•Sound pressure level: 80 dB(A) Lp A

•Revolutions per minute: 2600

•Air requirement: 104 l/min (1.7 l/sec)

HAZET Sheet metal profile snips 1961R-3 •Compact design facilitates working in confined spaces and cutting the smallest of contours

•Right hand cutting

•For figure cutting and straight cuts

•For sheet thickness up to 1.2 mm (600 N/mm2)

•Edge length: 20 mm

•Lever transmission system for a minimum effort

•For especially small radii and working in areas with restricted access

•Shear head drop-forged

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 180 mm

•Net weight: 0.19 kg

HAZET Sheet metal profile snips 1961L-3 •Compact design facilitates working in confined spaces and cutting the smallest of contours

•Left hand cutting

•For figure cutting and straight cuts

•For sheet thickness up to 1.2 mm (600 N/mm2)

•Edge length: 20 mm

•Lever transmission system for a minimum effort

•For especially small radii and working in areas with restricted access

•Shear head drop-forged

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 180 mm

•Net weight: 0.19 kg

HAZET Sheet metal profile snips 1961L-2 •L = left hand cutting

•For figure cutting and straight cuts

•With lever transmission system

•Shear head drop-forged, hardened and tempered

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 260 mm

•Net weight: 0.52 kg

HAZET Sheet metal profile snips 1961R-2 •R = right hand cutting

•For figure cutting and straight cuts

•With lever transmission system

•Shear head drop-forged, hardened and tempered

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 260 mm

•Net weight: 0.55 kg

Application: HAZET Metal shear 9036N-5 For highly precise cutting of all aluminium and steel sheets

•Heavy-duty cutting blade for maximum cutting capacity: steel 1.2 mm / aluminium 1.6 mm

•Ideal for straight cuts

•Also appropriate for contour cuts

•Continuous speed regulation via speed regulator on back of handle

•Vibration damped

•Cutting width: 4.5 mm

•Air connection inlet: Inside thread 12.91 mm (1/4″)

•Coupler plug: Nominal size 7.2 (included)

•Hose diameter (recommended): 10 mm

•Working pressure (bar): 6.3

•Sound power level: 86 db(A) Lp W

•Vibration acceleration: 1.60 m/s2

•Power in watts: 370 Watt

•Cold insulated handle

•Dimensions / length: 255 mm

•Net weight: 1 kg

•Sound pressure level: 80 dB(A) Lp A

•Air requirement: 104 l/min (1.7 l/sec)

HAZET Tube cutter ∙ small design 2181N-1 ∙ 3 – 16 •Cutting aluminium, copper and thin-walled metal tubes

•“Instant Change System (ICS)” allows the cutting wheel to be changed quickly without tools

•Steel supported spindle for better sliding

•Significantly reduced work radius

•Incl. 1 cutting wheel (2180 N-021)

•Ergonomic rotary knob for optimum handling

•Body, carriage and rotary knob made from die-cast zinc

•Surface: lacquered

•Dimensions / length: 52 mm

•Diameter (min-max): 3 – 16 mm

•Net weight: 0.1 kg

Application: HAZET Tube cutter 2180N-2 ∙ 6 – 35 Cutting aluminium, copper and thin-walled metal tubes

•4 guide rollers for optimum hold on the pipe whilst cutting

•Integrated NOGA deburring blade, can be pulled out completely

•Quick change system allows the cutting wheel to be changed quickly without tools

•Incl. 2 cutting wheels (2180N-021): one installed in head and one in rotary knob cap

•Steel supported spindle for better sliding

•Body made of magnesium die-cast

•Slide and turn knob made of zinc die-cast

•Dimensions / length: 145 mm

•Diameter (min-max): 6 – 35 mm

•Net weight: 0.39 kg

HAZET Spare chain 4682-01 •Spare chain for 4682

•Net weight: 0.2 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

Application: HAZET Chain tube cutter 4682 ∙ 15 – 75 Cutting of pipes, e.g. made ​​of steel (not stainless steel) up to 2.5 mm wall thickness and 75 mm ⌀

•Easy adjustment due to T-screw during cutting process

•Extended cutting diameters are achieved by using extension chain HAZET 4682-01

•Little effort, fixed with Grip technique

•Surface: nickel-plated

•Dimensions / length: 255 mm

•Diameter (min-max): 15 – 75 mm

•Net weight: 0.82 kg

Application: HAZET Chain tube cutter 4682-1 ∙ 20 – 115 Cutting pipes made of galvanized steel, copper, PVC and aluminium up to a wall thickness of 6 mm and 115 mm ⌀

•Easy adjustment due to T-screw during cutting process

•15 cutting wheels made of alloyed steel

•Surface: nickel-plated

•Dimensions / length: 315 mm

•Diameter (min-max): 20 – 115 mm

•Net weight: 1.21 kg

HAZET Chain 4682-03 •Spare chain for 4682-1

•Net weight: 0.31 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

Application: HAZET Universal shears 2158 Cutting thin sheet metal, wires, plastics, balanced weights, carpets, etc.

•Ergonomic design allows one-hand operation of the locking device

•Blades: rust-resistant stainless steel

•Locking device

•Additionally with round cutter for wire stripping (1 or 1.5 mm2)

•Wire guide for cutting lashing wire up to 2.5 mm ⌀

•HAZET 2-component handle

•Dimensions / length: 194 mm

•Net weight: 0.12 kg

HAZET Cutter wheel 2180N-021 •In conjunction with HAZET tube cutter 2180 N-1 or 2181 N-1

•Spare cutter wheel for 2180N-2 and 2181N-1

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Sheet metal profile snips 1961L-1 •L = left hand cutting

•For figure cutting and short, straight cuts

•For sheet metal up to 1.8 mm, VA-steel sheets up to 1.2 mm

•With lever transmission system

•Shear head drop-forged, hardened and tempered

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 260 mm

•Net weight: 0.51 kg

HAZET Sheet metal profile snips 1961R-1 •R = right hand cutting

•For figure cutting and short, straight cuts

•For sheet metal up to 1.8 mm, VA-steel sheets up to 1.2 mm

•With lever transmission system

•Shear head drop-forged, hardened and tempered

•Induction-hardened cutting edges with grind

•Ergonomically shaped HAZET 2-component plastic handle covers (blue/black)

•Dimensions / length: 260 mm

•Net weight: 0.48 kg

HAZET Cable shears ∙ with protective insulation 1804VDE-33 •Twin cutting edge

•Cutting of copper- and aluminium cables without squeezing

•Handles with dip coating

•Surface: with protective insulation

•IEC 60900:2018

•Made in Germany

•Dimensions / length: 208 mm

•VDE protective insulation up to 1000 V

•Net weight: 0.36 kg

HAZET Cable shears ∙ with protective insulation 1804KV-33 •Twin cutting edge

•Cutting of copper- and aluminium cables without squeezing

•Surface: with protective insulation

•IEC 60900:2018

•Made in Germany