Bolt Extractor

HAZET Stud extractor 841-016 •Stud extractor For 841/25

•Net weight: 0.01 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

HAZET Stud extractor 841-017 •Stud extractor For 841/25

•Net weight: 0.01 kg

DisclaimerUnsuitable or defective spare parts or improper part installation may cause damage, malfunction or total failure of the tool. The use of non-approved spare parts will void all warranty, service, compensation and liability claims against the manufacturer or the manufacturers agents, distributors and sales representatives.

Mounting sleeve, M10 x 1.5

Mounting sleeve, M10 x 1.5 •for driving in stud bolts

•very flat compact and robust execution

•right and left clamping function

•also for lengthy stud bolts

•special tool steel

Mounting sleeve, M10 x 1.5

Mounting sleeve, M10 x 1.5

HAZET Stud bolt extractor 844-8 ∙ Square, hollow 12.5 mm polished •For installing and removing stud bolts and set screws with (1/2 inch) ∙ 23 mm right-hand or left-hand thread without damage

•Inside square Drive 12.5 = 1/2″ or Wrench size 21 mm outside hexagon

•Surface: chrome-plated, polished

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 65 mm

•Diameter: 23 mm

•Net weight: 0.14 kg

HAZET Stud bolt extractor 844-6 ∙ Square, hollow 12.5 mm polished •For installing and removing stud bolts and set screws with (1/2 inch) ∙ 23 mm right-hand or left-hand thread without damage

•Inside square Drive 12.5 = 1/2″ or Wrench size 21 mm outside hexagon

•Surface: chrome-plated, polished

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 65 mm

•Diameter: 23 mm

•Net weight: 0.14 kg

HAZET Stud bolt extractor 844-12 ∙ Square, hollow 12.5 mm polished •For installing and removing stud bolts and set screws with (1/2 inch) ∙ 27 mm right-hand or left-hand thread without damage

•Inside square Drive 12.5 = 1/2″ or Wrench size 21 mm outside hexagon

•Surface: chrome-plated, polished

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 75 mm

•Diameter: 27 mm

•Net weight: 0.19 kg

HAZET Stud bolt extractor 844-7 ∙ Square, hollow 12.5 mm polished •For installing and removing stud bolts and set screws with (1/2 inch) ∙ 23 mm right-hand or left-hand thread without damage

•Inside square Drive 12.5 = 1/2″ or Wrench size 21 mm outside hexagon

•Surface: chrome-plated, polished

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 65 mm

•Diameter: 23 mm

•Net weight: 0.14 kg

HAZET Stud extractor set 844/5 ∙ Square, hollow 12.5 mm (1/2 polished •Plastic box 165-S (1/9)

inch) ∙ Number of tools: 5 •Safety-Insert-System, 2-component soft foam insert. Insert also suitable for HAZET Assistent

•Surface: chrome-plated, polished

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Dimensions / length: 185 mm x 153 mm x 52 mm

•Net weight: 1.34 kg

•Number of tools: 5