Angle Measuring Disc

Torque angle gauge, 3/4", claw

Torque angle gauge, 3/4", claw •set contents ideal for air conditioning and refrigeration engineers

•actuation accuracy: ±3 % tolerance of the set scale value

•precise reading accuracy for a minimum 5.000 tightening cycles

•for controlled fastening in clockwise and counter clockwise directions

•changing the operating direction takes place by turning the torque wrench

•double scale in Nm and lbf•ft divisions for precise adjustment

•includes micrometer scale in Nm divisions for precise and fine adjustment

•large vision panel, precise adjustment using a magnifying glass

•an audible and palpable signal when the desired torque value is achieved

•torque setting is quick and easy using the locking knob in the handle end

•secure locking function within the handle

•two component handle with a soft zone, is ergonomic in design and comfortable in the hand

•with snap lock retangular tool holder for 14x18 range of end tools

•individually marked with serial number - unique product identification

•including certificate according to DIN EN ISO 6789:2017(E)
- traceable to national standards

Torque angle gauge, 3/4", claw •actuation accuracy: ±3 % tolerance of the set scale value

•precise reading accuracy for a minimum 5.000 tightening cycles

•for controlled fastening in clockwise and counter clockwise directions

•torque setting by pulling out and pushing in the slide in knob at the end of the handle

•the direction of rotation (clockwise and counter clockwise) can be changed by simply rotating the square drive piece

•double scale in Nm and lbf•ft divisions for precise adjustment

•includes micrometer scale in Nm divisions for precise and fine adjustment

•large vision panel, precise adjustment using a magnifying glass

•an audible and palpable signal when the desired torque value is achieved

•exact gearing 30 teeth ratchet mechanism

•torque setting is quick and easy using the locking knob in the handle end

•secure locking function within the handle

•with ejection mechanism on the ratchet head

•two component handle with a soft zone, is ergonomic in design and comfortable in the hand

•square drive adaptor to DIN 3120 / ISO 1174 with ball lock

•individually marked with serial number - unique product identification

•including calibration declaration of conformity according to DIN EN ISO 6789:2017(E) - traceable to national standards

Application: HAZET Mechanical angle dial 6690 ∙ Square, hollow 12.5 mm (1/2 inch) ∙ Square, solid 12.5 mm (1/2 inch) Rotation angle controlled screw tightening (e.g. cylinder head bolts)

•Flexible, magnetic holder for the fixed point

•To be used with operating tools with Outside square drive 12.5 = 1/2″ (or 20 = 3/4″) and tools with Inside square drive 12.5 = 1/2″ (or 20 = 3/4″)

•Range 0 –360°, graduation 1°, 95 mm ⌀

•Made in Germany

•Drive: Square, hollow 12.5 mm (1/2 inch)

•Output: Square, solid 12.5 mm (1/2 inch)

•Net weight: 0.29 kg

Torque angle gauge, 3/4", claw