QUINTON HAZELL QJB100T Mounting Tool, bellow

Operation: Safety First 1. Slide boot onto arms, large end first. The arms should Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar just protrude from the small end of the boot. To fit a boot (125 psi). Air lines are dangerous - use them correctly to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. Putting into service 2. Press " + " button until arms open enough to pass over Before use check cap-retaining screws are secure.If the Air the joint. Keep hands clear of moving parts. The air line tool is dropped check for cracked components. Check air can now be disconnected. The arms will remain open line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of until the " - " button is pressed. 3. Place Airtool over CV joint and press release button pneumatically operated tools. Use (" -"). Keep hands away from moving parts. Keep hands away from moving parts. Never operate 4. Withdraw the Airtool, leaving the boot in position. the Air tool near the face or body. Only use Air tool Complete the installation in the normal way. to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use. supply after use.