PartsTec PTA510-0303 EGR valve Electric, Solenoid Valve, with seal ring, Control Unit/Software must be trained/updated

Due to the tight installation situation in the engine, the The delivered PartsTec products are only for the intended When installing a new electrical EGR valve, EGR module or a screws of the EGR cooler should be loosened slightly in throttle body, the manufacturer-specific repair instructions use provided. advance. Then the EGR valve with gasket can be mounted more Installation may only be carried out by trained specialist must necessarily be observed. easily and the connector for the EGR valve can be fixed more It must be checked in advance whether the engine control personnel and in accordance with the manufacturer-specific easily. repair instructions. unit (ECU) supports the corresponding characteristic values of the new EGR valve or EGR module respectively the throttle Our articles are generally delivered without assembly body or the adaptation values have to be reset! instructions. If the characteristic value adaptation is not carried out, There is no claim to warranty for improper use. it can cause failure codes or error messages in the engine control unit (ECU). It may be necessary to update the engine control unit (ECU). In any case of a warranty, evidence of the characteristic value adaptation must be attached.