HELLA 2SB 343 390-091 Combination Rearlight Right, Left, Crystal clear, with indicator failure control

Regarding flasher lights with LEDs with active electronics Regarding single or double function lamps with LEDs without

flasher function

In connection with these low powers, which are very differen In connection with these low powers, which are t from bulb versions, there can be problems with the bulb fa ilure check very different from bulb versions, there can be during operation on various traction vehicles. problems during operation on various traction vehicles because further lighting functions are detected Since indicator failure checks are required by legislation, by some traction vehicles. This is a vehicle we recommend only operating the light in combination comfort function which is not required by legislation and with an indicator control unit part no. "5DS 009 602-¿, 5DS 009 552-¿ or LED flasher unit 4.. 009 492". does not release drivers from their obligation Operation of the light with alternating current or pulsed di to see for themselves that the lighting equipment is working. rect current is not permitted! Here, too, faulty diagnoses can be a result of the lower The individual light functions may only be operated with a v ehicle fuse of max. 3A. power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.