HAZET 9212M-1 Impact Wrench 12.5 (1/2") mm (inch) 18V, Li-Ion Rechargeable Battery, 99,6 dB, 2500 1/min

Application: HAZET Mini cordless impact wrench set ∙ 18 V 9212M-1 ∙ Maximum loosening torque: 270 Nm ∙ Square, solid 12.5 mm Work independently

(1/2 inch) ∙ Number of tools: 3 •High efficiency thanks to brushless motor

•Handy, short and lightweight tool

•3-piece set ∙ in textile bag: 1 cordless impact wrench 1 quick charger (40 minutes) 1 Li-ion rechargeable batteries 18 V, 2 Ah

•There are three power stages to choose from for torque acceleration: Stage 1 100 Nm at 0 – 700 rpm (0 – 1200 impacts/min) Stage 2 190 Nm at 0 – 1600 rpm (0 – 2000 impacts/min) Stage 3 220 Nm at 0 – 2500 rpm (0 – 3200 impacts/min)

•Amperage without load: 4.5 A

•Charging time ~ 35 minutes

•Brushless DC motor (BLDC):

•Longer service life, less wear, no need to change the carbon brushes

•High efficiency and hence less battery consumption

•More compact motor allows for smaller installation dimensions





•Illumination of the work area before the output begins to move

•Li-Ion rechargeable battery with very low self-discharge (only 2%) compared to a standard NiMH rechargeable battery (15 – 25%)

•Net weight: 0.96 kg (without rechargeable battery)

•Battery net weight: 0.37 kg (only sets 9212 M-1 and 9212 M-1/4)

•Battery charger net weight: 0.66 kg (only sets 9212 M-1 and 9212 M-1/4)

•Dimensions including rechargeable battery: 228 x 63 x 135 mm

•Including belt clip, attachable on both sides, and hand strap

•Recommended torque: 220 Nm

•Sound power level: 110.6 db(A) Lp W

•Vibration acceleration: 15.40 m/s2

•Loosening torque (max) determined with screw size M: 16

•Output: Square, solid 12.5 mm (1/2 inch)

•Net weight: 1.34 kg

•Tightening torque max.: 220 Nm

•Maximum loosening torque: 270 Nm

•Sound pressure level: 99.6 dB(A) Lp A

•Revolutions per minute: 0 – 2500

Do you know – Li-Ion batteries:

•Do not have any memory effect

•Consist of cells with 3.6 V each

•After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only

•Have an energy density which is twice as high as nickel cadmium batteries, for example

•Have a nominal voltage three times higher than a nickel metal hydride battery

•Require multiple complete charging cycles to reach full capacity

•Number of tools: 3