E46 Coupe 323Ci 2.5 Wiper linkage (163 hp Petrol M52 B25 (256S4))
- Fitting Position: Front
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Supplementary Article / Supplementary Info: without electric motor
- Assy. / disassy. by qualified personnel required!
- Item number: 103-04-009
- Our price: 31,99 €
- Manufacturer: ABAKUS
- EAN number: 224657153782401537824
- Condition: New
The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale.
Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops.
Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list).
Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system.
Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Front
- Supplementary Article / Supplementary Info: without electric motor
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Item number: 0646230
- Our price: 64,49 €
- Manufacturer: VAN WEZEL
- EAN number: 5410909679712
- Condition: New
- Fitting Position: Front
- only in connection with: Wimo 6763 6 914 577
- Supplementary Article / Supplementary Info: without electric motor
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Item number: 54135
- Our price: 64,49 €
- Manufacturer: AIC
- EAN number: 4046283541355
- Condition: New
Before mounting the wiper arm must be the wiper motor Our products are usually delivered without installation connect and turn on the ignition so that the Engine is instructions. Installation may only be carried out by running in parking position. Then the must Drive lever can trained specialist technicians. Products supplied by us are be positioned on the wiper motor. Thereafter, the wiper arm exclusively intended for proper and appropriate use. The can be mounted. warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front
- Item number: 5910-05-013540P
- Our price: 85,49 €
- Manufacturer: BLIC
- EAN number: 224555153685601536856
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 19
- Height [mm]: 60,1
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Thickness [mm]: 19
- Minimum thickness [mm]: 17,4
- Item number: C4B002ABE
- Manufacturer: ABE
- EAN number: 5900427204805
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 286
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 22
- Height [mm]: 52
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Tightening Torque [Nm]: 120
- Item number: 09.5390.31
- Manufacturer: BREMBO
- EAN number: 8020584018163
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Height [mm]: 44,9
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0498 / 0352
- MAPP code available
- Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2
- Observe dimensions
- Item number: 13.0460-3605.2
- Our price: 34,49 €
- Manufacturer: ATE
- EAN number: 4006633122733
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,8
- Quantity Unit: Axle Set
- Height [mm]: 57,3
- Width 2 [mm]: 151,3
- Width 1 [mm]: 150,1
- Test Mark: E1 90R-02A0334 / 0275
- MAPP code available
- Article number of recommended accessories: 24.8190-0207.2, 24.8190-0220.2
- Observe dimensions
- Item number: 13.0460-5405.2
- Our price: 29,49 €
- Manufacturer: ATE
- EAN number: 4006633122771
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 276,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 19,0
- Height [mm]: 60,3
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 17,4
- Inner Diameter [mm]: 160,8
- MAPP code available
- Test Mark: E1 90R-02C0234 / 1114
- Bore Diameter [mm]: 14,5
- Item number: 24.0119-0107.1
- Manufacturer: ATE
- EAN number: 4006633069205
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 286,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 51,5
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 19,6
- Inner Diameter [mm]: 147,5
- MAPP code available
- Test Mark: E1 90R-02C0858 / 1307
- Bore Diameter [mm]: 14,5
- Item number: 24.0322-0115.1
- Manufacturer: ATE
- EAN number: 4006633276177
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Thickness [mm]: 16,1
- Quantity Unit: Axle Set
- Height [mm]: 45
- Width [mm]: 123,1
- WVA Number: 21934
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987473004, 1987474154, 1987474366, 1987474956, 1987474904, 1987474926, 1987474944, 1987474594
- Observe technical data
- Item number: 0 986 424 484
- Our price: 21,99 €
- Manufacturer: BOSCH
- EAN number: 3165143662694
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 286
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 51,5
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- Item number: BDC3804
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593256552
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 19
- Height [mm]: 60,1
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17,4
- Item number: BDC4536
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593603837
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 44,9
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0258 / 0352
- MAPP code available
- Article number of recommended accessories: 24.8190-0206.2, 24.8190-0211.2, 24.8190-0213.2, 24.8190-0221.2, 24.8190-0229.2, 24.8190-2802.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-3605.2
- Our price: 50,99 €
- Manufacturer: ATE
- EAN number: 4006633339681
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,8
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 57,3
- Width 2 [mm]: 151,3
- Width 1 [mm]: 150,1
- Test Mark: E1 90R-02A0258 / 0274
- MAPP code available
- Article number of recommended accessories: 24.8190-0207.2, 24.8190-0220.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-5405.2
- Our price: 43,99 €
- Manufacturer: ATE
- EAN number: 4006633096881
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Diameter [mm]: 286,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 51,5
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 20,4
- Inner Diameter [mm]: 147,5
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0175
- Bore Diameter [mm]: 14,5
- Item number: 24.0122-0115.1
- Manufacturer: ATE
- EAN number: 4006633133685
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 276,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 19,0
- Height [mm]: 60,3
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 16,6
- Inner Diameter [mm]: 160,8
- MAPP code available
- Bore Diameter [mm]: 14,5
- Item number: 24.0319-0107.1
- Manufacturer: ATE
- EAN number: 4006633147279
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 16,3
- Quantity Unit: Axle Set
- Height [mm]: 44,9
- Width [mm]: 123
- WVA Number: 21934, 21935
- Test Mark: ECE-R90
- Weight [kg]: 0,98
- Item number: 598753
- Our price: 25,49 €
- Manufacturer: VALEO
- EAN number: 3276425987531
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Front Axle
- Diameter [mm]: 286,2
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 51,6
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,8
- Item number: 0 986 478 513
- Manufacturer: BOSCH
- EAN number: 3165142287119
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 19
- Height [mm]: 60
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,8
- Item number: 0 986 478 642
- Manufacturer: BOSCH
- EAN number: 3165141123449
- Condition: New
price incl. 19% VAT
excl. delivery costs