MITSUBISHI Lancer Estate (C1_V, C3_V) 1.5 Wheel nuts (83 hp Petrol 4G15 (8V))
-
- Fitting Position: Rear Axle, Front Axle
- Rims: for steel rims
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Thickness [mm]: 17
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,021
- Observe service information
- Material: Steel
- Tightening Torque [Nm]: 110
- Diameter [mm]: 21
- Internal Thread Size: M12 x 1,5
- Item number: 46639
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816466390
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle, Front Axle
- Rims: for steel rims
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Thickness [mm]: 17
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,021
- Observe service information
- Material: Steel
- Tightening Torque [Nm]: 110
- Diameter [mm]: 21
- Internal Thread Size: M12 x 1,5
- Item number: 11939
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816119395
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle, Front Axle
- Rims: for steel rims
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Thickness [mm]: 17
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,021
- Observe service information
- Material: Steel
- Tightening Torque [Nm]: 110
- Diameter [mm]: 21
- Internal Thread Size: M12 x 1,5
- Item number: 80 91 1939
- Manufacturer: SWAG
- EAN number: 4044688119391
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 20
- Fitting Position: Wheel Side
- Thread Size: M12
- Bolt Head- / Nut Design: Male Hex
- Observe service information: +
- Item number: C70596
- Manufacturer: ROMIX
- EAN number: 5907626822854
- Condition: New
- Spanner Size: 21
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 17
- Thread Size: M12 x 1,5
- Bolt Head- / Nut Design: Male Hex
- Rims: for steel rims
- Item number: 52921
- Manufacturer: AIC
- EAN number: 4046283529216
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Rims: for steel rims
- Item number: S2-1-12-50-16-21-O
- Manufacturer: EIBACH
- EAN number: 4050278092272
- Condition: New
Only for intended use. The installation may only by trained skilled personnel. Delivery without installation instructions. Please observe the workshop manuals.
-
- Fitting Position: Rear Axle, Front Axle
- Rims: for steel rims
- Packaging width [cm]: 2,1
- Packaging height [cm]: 1,6
- Packaging Depth [cm]: 2,1
- Item number: A32-0146
- Manufacturer: ACKOJA
- EAN number: 4062375098859
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Front axle both sides, Rear Axle
- Rims: for steel rims
- Length [mm]: 17
- Item number: H60025BTA
- Manufacturer: BTA
- EAN number: 221137920703442207034
- Condition: New

- Spanner Size: 21
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Length [mm]: 37
- Item number: 561-3003
- Manufacturer: TIPTOP
- EAN number: 5907471967366
- Condition: New

- Spanner Size: 19
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Material: Steel
- Length [mm]: 35
- Item number: 561-3001
- Manufacturer: TIPTOP
- EAN number: 5907471967359
- Condition: New
- Spanner Size: 21
- Internal Thread [mm]: M 12 x 1,5
- Rims: for light alloy rims
- Item number: 50L2000-OYO
- Manufacturer: Oyodo
- EAN number: 226984177780561777805
- Condition: New
-
- Fitting Position: Front Axle, Rear Axle
-
- Required quantity: 16
- Rims: for steel rims
- Supplementary Info: Original VAICO Quality
- Spanner Size: 21
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,0285
- Tightening Torque [Nm]: 110
- Packaging width [cm]: 2,1
- Packaging height [cm]: 1,6
- Packaging Depth [cm]: 2,1
- Item number: V32-0146
- Manufacturer: VAICO
- EAN number: 4046001569227
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 26
- Quality / Grade: 8
- Surface: Chromed
- Weight [kg]: 0,26
- Material: Steel
- Diameter [mm]: 23,7
- for OE number: M115
- Internal Thread Size: M12 x 1,5
- Lockable: Lockable
- Item number: 81 92 7057
- Manufacturer: SWAG
- EAN number: 4044688540966
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Internal Thread [mm]: 12 X 1,50
- Length [mm]: 16
- Item number: 73HY009
- Manufacturer: RED-LINE
- EAN number: 224869160037621600376
- Condition: New
- Thickness [mm]: 26
- Diameter [mm]: 23,7
- Internal Thread Size: M12 x 1,5
- Quality / Grade: 8
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Fitting Position: Front Axle, Rear Axle
- Weight [kg]: 0,26
- for OE number: M115
- Lockable: Lockable
- Observe service information
- Item number: 27057
- Our price: 20,23 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816270577
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle, Front Axle
-
- Rims: for steel rims
- Packaging width [cm]: 2,1
- Packaging height [cm]: 1,6
- Packaging Depth [cm]: 2,1
- Item number: A32-0170
- Manufacturer: ACKOJA
- EAN number: 4062375103942
- Condition: New
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Thread Size: M12 x 1,5
- Colour: silver
- Weight [kg]: 0,03
- Rims: for steel rims
- Material: Steel
- Height [mm]: 17
- Item number: M1215KEOEJ
- Manufacturer: SCC Fahrzeugtechnik
- EAN number: 4250513418700
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Spanner Size: 21
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Thickness [mm]: 17
- Bolt Head- / Nut Design: Male Hex
- Weight [kg] 0
- Tightening Torque [Nm]: 110
- Component Number: BSG 40-230-008
- Item number: BSG 40-230-008
- Manufacturer: BSG
- EAN number: 8719822043523
- Condition: New
- Spanner Size: 21
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Thickness [mm]: 17
- Bolt Head- / Nut Design: Male Hex
- Weight [kg] 0
- Tightening Torque [Nm]: 110
- Component Number: BSG 40-230-007
- Item number: BSG 40-230-007
- Manufacturer: BSG
- EAN number: 8719822043516
- Condition: New
- Spanner Size: 21
- Wheel Fastening: Conical Seat F
- Thread Size: M12 x 1,5
- Colour: silver
- Weight [kg]: 0,03
- Rims: for steel rims
- Material: Steel
- Height [mm]: 17
- Item number: ZM1215KEOEJ
- Manufacturer: SCC Fahrzeugtechnik
- EAN number: 4251695522681
- Condition: New
price incl. 19% VAT
- 1
- 2