Vehicle identification number: 0928638
Ford Escort GAF 1.6 Turbo RS Wheel nuts (132 hp Petrol LNB)
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Bolt Head- / Nut Design: Male Hex
- Item number: 658W0002
- Manufacturer: RIDEX
- EAN number: 4059191604531
- Condition: New
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 27,5
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,058
- Diameter [mm]: 28,0
- Item number: 658W0016
- Manufacturer: RIDEX
- EAN number: 4059191605071
- Condition: New
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 10
- Surface: Chromed
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,060
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with lid
- Rims: for light alloy rims, for steel rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 29463
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816294634
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 10
- Surface: Chromed
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,06
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with lid
- Rims: for light alloy rims, for steel rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 46674
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816466741
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Material: Steel
- Length [mm]: 35
- Item number: 561-3001
- Manufacturer: TIPTOP
- EAN number: 5907471967359
- Condition: New
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,058
- Observe service information
- Rims: for light alloy rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 50 90 7176
- Manufacturer: SWAG
- EAN number: 4044688071767
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,058
- Observe service information
- Rims: for light alloy rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 07176
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816071761
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,058
- Observe service information
- Rims: for light alloy rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 46629
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816466291
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 10
- Surface: Chromed
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,060
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with lid
- Rims: for light alloy rims, for steel rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 50 92 9463
- Manufacturer: SWAG
- EAN number: 4044688294630
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M 12 x 1,5
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,052
- Packaging width [cm]: 3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 3
- Item number: V25-1752
- Manufacturer: VAICO
- EAN number: 4046001637216
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,06
- Packaging width [cm]: 1,87
- Packaging height [cm]: 3,03
- Packaging Depth [cm]: 2,78
- Item number: V25-0974
- Manufacturer: VAICO
- EAN number: 4046001748868
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 8
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,0567
- Packaging width [cm]: 2,8
- Packaging height [cm]: 2,8
- Packaging Depth [cm]: 3
- Item number: V25-0590
- Manufacturer: VAICO
- EAN number: 4046001569135
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Chrome-(VI)- free passivation
- Bolt Head- / Nut Design: Male Hex
- Material: Steel
- Height [mm]: 30
- Diameter [mm]: 28
- Internal Thread Size: M12x1,5
- Item number: OP-UWN10001-1
- Manufacturer: OPTIMAL
- EAN number: 4058787352733
- Condition: New
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 26
- Quality / Grade: 8
- Surface: Chromed
- Weight [kg]: 0,26
- Material: Steel
- Diameter [mm]: 23,7
- for OE number: M115
- Internal Thread Size: M12 x 1,5
- Lockable: Lockable
- Item number: 81 92 7057
- Manufacturer: SWAG
- EAN number: 4044688540966
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Chrome-(VI)- free passivation
- Bolt Head- / Nut Design: Male Hex
- Material: Steel
- Height [mm]: 30
- Diameter [mm]: 28
- Internal Thread Size: M12x1,5
- Item number: OP-UWN10001-20
- Manufacturer: OPTIMAL
- EAN number: 4058787353334
- Condition: New
price incl. 19% VAT
- Thickness [mm]: 26
- Diameter [mm]: 23,7
- Internal Thread Size: M12 x 1,5
- Quality / Grade: 8
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Fitting Position: Front Axle, Rear Axle
- Weight [kg]: 0,26
- for OE number: M115
- Lockable: Lockable
- Observe service information
- Item number: 27057
- Our price: 21,78 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816270577
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31,0
- Quality / Grade: 10
- Bolt Head- / Nut Design: Male Hex
- Diameter [mm]: 28,0
- Item number: AS-202655
- Manufacturer: Aslyx
- EAN number: 8435627027246
- Condition: New
- Spanner Size: 21
- Fitting Position: Front Axle, Rear Axle
- Surface: Zinc-coated
- Thread Size: M12 x 1,5
- Colour: chrome
- Length [mm]: 37
- Item number: 561-3003
- Manufacturer: TIPTOP
- EAN number: 5907471967366
- Condition: New
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Observe service information
- Material: Steel
- Diameter [mm]: 28,0
- Item number: AS-506226
- Manufacturer: Aslyx
- EAN number: 8435627050107
- Condition: New
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Quality / Grade: 8
- Bolt Head- / Nut Design: Male Hex
- Material: Steel
- Height [mm]: 31
- Item number: BOL-0015
- Manufacturer: GOOM
- EAN number: 8054132142598
- Condition: New
- 1
- 2