VAUXHALL Nova CC (S83) 1.2 S Wheel hub (55 hp Petrol 12 ST)
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 40
- Weight [kg]: 0,200
- Inner Diameter 2 [mm]: 18, 29
- Bearing Type: Tapered Roller Bearing
- Width 2 [mm]: 15
- Width 1 [mm]: 15
- Outer Diameter 2 [mm]: 50
- new version
- Item number: 06507
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816065074
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 17,5
- Diameter [mm]: 39,9, 50,3
- Width [mm]: 14,6
- Inner Diameter 2 [mm]: 29
- Width 2 [mm]: 14,2, 13,8
- Width 1 [mm]: 13,8
- Item number: 200012
- Manufacturer: OPTIMAL
- EAN number: 4031185200127
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Diameter [mm]: 50
- Inner Diameter 2 [mm]: 29, 17
- Outer Diameter 2 [mm]: 40
- Height 2 [mm]: 15
- Item number: 51721Set
- Manufacturer: AIC
- EAN number: 4046283517213
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Vehicle configuration line / variant: FRRE LR+RE LR+RE, FRRE LR+RE
- Inner Diameter [mm]: 29,0
- Inner Diameter 2 [mm]: 17
- Number of mounting bores: 1
- Width 2 [mm]: 39
- Width 1 [mm]: 14,0
- Number of bolts / screws: 0,0
- Item number: KWD1068
- Manufacturer: DAYCO
- EAN number: 8021787340600
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 40
- Weight [kg]: 0,200
- Inner Diameter 2 [mm]: 17,5, 29
- Bearing Type: Tapered Roller Bearing
- Width 2 [mm]: 15
- Width 1 [mm]: 14,6
- Outer Diameter 2 [mm]: 50
- new version
- Item number: 40 85 0002
- Manufacturer: SWAG
- EAN number: 4044688633019
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Height 1 [mm]: 14,75
- Diameter [mm]: 50
- Inner Diameter 2 [mm]: 29, 17,5
- Outer Diameter 2 [mm]: 40
- Height 2 [mm]: 15
- Item number: 1241300110
- Manufacturer: JP GROUP
- EAN number: 5710412118112
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Height 1 [mm]: 13,843
- Diameter [mm]: 39,9
- Weight [kg]: 0,17
- Inner Diameter 2 [mm]: 17,5, 29
- Outer Diameter 2 [mm]: 50,3
- Height 2 [mm]: 14,224
- Dust Cover: without dust cover
- Packing Type: Box
- Packaging length [cm]: 10,3
- Packaging width [cm]: 9,5
- Packaging height [cm]: 6,2
- Item number: OP-WB-11084
- Manufacturer: MOOG
- EAN number: 4044197610402
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
- Fabrication Number: KLT-DW-020
- Item number: KLT-DW-020
- Manufacturer: NTY
- EAN number: 5908281438459
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Product line: The Original
- Diameter [mm]: 50,3
- Inner Diameter 2 [mm]: 29, 17,5
- Width 2 [mm]: 14,6
- Width 1 [mm]: 14,7
- Outer Diameter 2 [mm]: 39,9
- Item number: QWB155C
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593108547
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with fastening / mounting material
- for OE number: 90005147
- Diameter [mm]: 40
- Weight [kg]: 0,274
- Inner Diameter 2 [mm]: 18, 29
- Bearing Type: Tapered Roller Bearing
- Width 1 [mm]: 14
- Outer Diameter 2 [mm]: 50
- old version
- Item number: 03115
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816031154
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 29, 17,5
- Diameter [mm]: 50,3, 39,9
- Width [mm]: 14,6, 14,7
- Item number: 26803
- Manufacturer: MAPCO
- EAN number: 4043605035646
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Front Axle
- Supplementary Info: EXPERT KITS +
- Weight [kg]: 0,243
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Item number: V40-0380
- Manufacturer: VAICO
- EAN number: 4046001312182
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Diameter [mm]: 39,9
- Inner Diameter 2 [mm]: 17,5, 29
- Width 2 [mm]: 14,7
- Width 1 [mm]: 14,6
- Outer Diameter 2 [mm]: 50,3
- Item number: 713 6445 10
- Manufacturer: FAG
- EAN number: 4014870005061
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info: with accessories, with Split Pin, with gaskets / seals
- Diameter [mm]: 39
- Inner Diameter 2 [mm]: 17, 29
- Width 2 [mm]: 14
- Width 1 [mm]: 14
- Outer Diameter 2 [mm]: 50
- Item number: GK0944
- Manufacturer: GSP
- EAN number: 2237311296585
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 34
- Diameter [mm]: 64
- Width [mm]: 37
- Fabrication Number: KLP-DW-010
- Item number: KLP-DW-010
- Manufacturer: NTY
- EAN number: 5908281426456
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Right, Left, Rear Axle
- Diameter [mm]: 39
- Inner Diameter 2 [mm]: 17
- Width 1 [mm]: 13
- Item number: R153.07
- Manufacturer: SNR
- EAN number: 3413520706241
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Inner Diameter [mm]: 17, 29
- Diameter [mm]: 40, 50
- Width [mm]: 14
- Bearing Type: Tapered Roller Bearing
- old version
- Item number: ADG08302
- Manufacturer: BLUE PRINT
- EAN number: 5050063083026
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Required quantity: 2
- Inner Diameter [mm]: 17,5
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 39,9
- Width [mm]: 13,9
- Weight [kg]: 0,316
- Inner Diameter 2 [mm]: 29
- Width 2 [mm]: 14,2
- Outer Diameter 2 [mm]: 50,3
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Item number: WBE1137
- Manufacturer: CONTITECH
- EAN number: 4010858991418
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Info: ORIGINAL Quality
- Height 1 [mm]: 14,73
- Diameter [mm]: 50
- Inner Diameter 2 [mm]: 29, 17,5
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 2 [mm]: 40
- Height 2 [mm]: 15
- Item number: 614 160 0000
- Manufacturer: MEYLE
- EAN number: 4040074109007
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Diameter [mm]: 40
- Weight [kg]: 0,274
- Inner Diameter 2 [mm]: 17,5, 29
- Bearing Type: Tapered Roller Bearing
- Width 2 [mm]: 14
- Width 1 [mm]: 14
- Outer Diameter 2 [mm]: 50
- old version
- Item number: 40 85 0001
- Manufacturer: SWAG
- EAN number: 4044688631084
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5