Toyota Auris e18 1.8 Wheel hub (144 hp Petrol 2ZR-FAE)
- Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle both sides
- Number of Teeth, ABS ring: 48
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Thread Size: M12X1,5
- Diameter [mm]: 152
- Rim Hole Number: 5
- Item number: 654W1220
- Manufacturer: RIDEX
- EAN number: 4064138364713
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Axle bracket side
- Diameter [mm]: 152
- Item number: 39035
- Manufacturer: OSSCA
- EAN number: 6915093390355
- Condition: New
- Fitting Position: Rear Axle both sides
- Diameter [mm]: 152
- Item number: 39019
- Manufacturer: OSSCA
- EAN number: 6915093390195
- Condition: New
- Fitting Position: Rear Axle
- Weight [kg]: 3,537
- Transmission Type: Manual Transmission
- Packaging length [cm]: 15,2
- Packaging width [cm]: 15,2
- Packaging height [cm]: 14,0
- Item number: 0182-ACA38R
- Manufacturer: FEBEST
- EAN number: 4056111076256
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Number of Teeth: 26
- Weight [kg]: 3,45
- Transmission Type: Manual Transmission
- Packaging length [cm]: 14,1
- Packaging width [cm]: 14,1
- Packaging height [cm]: 9,5
- Item number: 0182-ZZE150MF
- Manufacturer: FEBEST
- EAN number: 4056111032542
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
-
- Required quantity: 2
- Braking / Drive Dynamics: for vehicles with ABS
- Supplementary Article / Supplementary Info: with lock nut
- Rim Hole Number: 5
- Item number: GT24-083
- Manufacturer: GT-BERGMANN
- EAN number: GT24-083
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Width [mm]: 76,5
- Number of mounting bores: 4
- Outer Diameter 2 [mm]: 138,9
- Item number: 19-7732
- Manufacturer: METELLI
- EAN number: 8032747435779
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
-
- Required quantity: 2
- Braking / Drive Dynamics: for vehicles with ABS
- Inner Diameter [mm]: 28
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 90
- Width [mm]: 76,4
- Rim Hole Number: 5
- Outer Diameter 2 [mm]: 139
- Item number: WBK-9024
- Manufacturer: KAVO PARTS
- EAN number: 8715616082211
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 28
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Diameter [mm]: 90
- Weight [kg]: 3,6
- Number of mounting bores: 5
- Distance of mounting bores [mm]: 68
- Item number: 33-1209
- Manufacturer: MAXGEAR
- EAN number: 5903766356655
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 90
- Rim Hole Number: 5
- Flange Diameter [mm]: 138,9
- Item number: W413409
- Manufacturer: DENCKERMANN
- EAN number: 2218612306104
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 139
- Width [mm]: 76,5
- Item number: A70-0383
- Manufacturer: ACKOJA
- EAN number: 4062375071074
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 28,3
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 140
- Width [mm]: 76,5
- Number of Teeth: 26
- Number of Teeth on input shaft: 26
- Item number: 981706
- Manufacturer: OPTIMAL
- EAN number: 4031185238427
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor, with wheel hub
- Diameter [mm]: 74, 62
- Width [mm]: 60
- Weight [kg]: 3,430
- Bolt Hole Circle Ø [mm]: 108
- Bearing Type: Angular Ball Bearing
- Outer Diameter 2 [mm]: 152
- Item number: ADT383112
- Manufacturer: BLUE PRINT
- EAN number: 5050063082715
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 27
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 90, 139
- Rim Hole Number: 5
- Item number: 33-0613
- Manufacturer: MAXGEAR
- EAN number: 5901619510995
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 139
- Width [mm]: 76
- Item number: A70-0384
- Manufacturer: ACKOJA
- EAN number: 4062375070992
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
-
- Required quantity: 2
- Braking / Drive Dynamics: for vehicles with ABS
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 90
- Rim Hole Number: 5
- Flange Diameter [mm]: 138,9
- Item number: VKBA 6874
- Manufacturer: SKF
- EAN number: 7316574347087
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 28
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring
- Diameter [mm]: 90, 62
- Width [mm]: 47
- Weight [kg]: 3,6
- Bearing Type: Angular Ball Bearing
- Outer Diameter 2 [mm]: 139
- Item number: 172486
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224724866
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 28
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring
- Diameter [mm]: 90, 62
- Width [mm]: 47
- Weight [kg]: 3,6
- Bearing Type: Angular Ball Bearing
- Outer Diameter 2 [mm]: 139
- Item number: ADT38287
- Manufacturer: BLUE PRINT
- EAN number: 5050063025620
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 30
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 152
- Width [mm]: 83,5
- Item number: A70-0391
- Manufacturer: ACKOJA
- EAN number: 4062375071098
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor, with wheel hub
- Diameter [mm]: 74, 62
- Width [mm]: 60
- Weight [kg]: 3,16
- Bolt Hole Circle Ø [mm]: 108
- Bearing Type: Angular Ball Bearing
- Outer Diameter 2 [mm]: 152
- Item number: 31687
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816316879
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3