Vehicle identification number: 3003015
PEUGEOT J5 Van (290) 2.5 DT Wheel hub (95 hp Diesel CRD93L)
- Fitting Position: Front Axle, Front axle both sides
- Height 1 [mm]: 20
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 80
- Weight [kg]: 0,9
- Inner Diameter 2 [mm]: 50
- Item number: 654W0076
- Manufacturer: RIDEX
- EAN number: 4059191321254
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 40, 30
- Diameter [mm]: 55, 68
- Width [mm]: 17, 19
- not for payload [kg]: 1800
- Item number: 654W0105
- Manufacturer: RIDEX
- EAN number: 4059191159468
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 40, 30
- Diameter [mm]: 55, 68
- Width [mm]: 17, 19
- not for payload [kg]: 1800
- Item number: SKWB-0180104
- Manufacturer: STARK
- EAN number: 4059191030521
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 139
- Number of Holes: 5
- Vehicle Identification Number (VIN) from: 0244301
- Diameter [mm]: 69, 50
- Inner Diameter 2 [mm]: 139
- Item number: H5F019BTA
- Manufacturer: BTA
- EAN number: 5900427446526
- Condition: New
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 139
- Number of Holes: 5
- Weight [kg]: 2,5
- Vehicle Identification Number (VIN) from: 0244301
- Diameter [mm]: 50, 69
- Item number: 12573
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816125730
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 139
- Number of Holes: 5
- Weight [kg]: 2,5
- Vehicle Identification Number (VIN) from: 0244301
- Diameter [mm]: 50, 69
- Item number: 70 91 2573
- Manufacturer: SWAG
- EAN number: 4044688125736
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 55
- Weight [kg]: 0,48
- Inner Diameter 2 [mm]: 30, 40
- not for payload [kg]: 1800
- Bearing Type: Tapered Roller Bearing
- Width 2 [mm]: 20
- Width 1 [mm]: 17
- Outer Diameter 2 [mm]: 68
- Item number: 19295
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816192954
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front axle both sides
- Height 1 [mm]: 20
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 80
- Weight [kg]: 0,9
- Inner Diameter 2 [mm]: 50
- Item number: GCF540099
- Manufacturer: goCORE
- EAN number: 4069197091273
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Supplementary Info: ORIGINAL Quality
- Height 1 [mm]: 22
- Diameter [mm]: 80
- Inner Diameter 2 [mm]: 50
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 2 [mm]: 80
- Height 2 [mm]: 22
- Item number: 11-14 033 5029/S
- Manufacturer: MEYLE
- EAN number: 4040074401743
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Vehicle configuration line / variant: FRRE LR+FR
- Inner Diameter [mm]: 50,0
- Number of mounting bores: 1
- Width 2 [mm]: 80
- Width 1 [mm]: 20,0
- Item number: KWD1263
- Manufacturer: DAYCO
- EAN number: 8021787342550
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Right, Left, Front Axle
- Diameter [mm]: 80
- Inner Diameter 2 [mm]: 50
- Width 1 [mm]: 20
- Tightening Torque [Nm]: 450
- Item number: R140.77
- Manufacturer: SNR
- EAN number: 3413520321277
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Right
-
- Payload from [kg]: 1000
- Payload to [kg]: 1400
- Product line: The Original
- Diameter [mm]: 55
- Inner Diameter 2 [mm]: 29,9, 39,8
- Width 2 [mm]: 20
- Width 1 [mm]: 18
- Outer Diameter 2 [mm]: 68
- Item number: QWB740
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593239159
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 50
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 80
- Width [mm]: 22
- Bearing Type: Tapered Roller Bearing
- Item number: 12695
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816126959
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: EXPERT KITS +
- Inner Diameter [mm]: 50
- Diameter [mm]: 80
- Width [mm]: 20,0
- Weight [kg]: 0,976
- Width 2 [mm]: 20
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Packaging Depth [cm]: 8
- Item number: V42-0061
- Manufacturer: VAICO
- EAN number: 4046001371608
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Vehicle configuration line / variant: REAR LR+RE
- Inner Diameter [mm]: 40,0
- Number of mounting bores: 1
- Width 2 [mm]: 18
- Width 1 [mm]: 23,0
- Item number: KWD1488
- Manufacturer: DAYCO
- EAN number: 8021787344790
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Right, Left, Front Axle
- Diameter [mm]: 80
- Inner Diameter 2 [mm]: 50
- Width 1 [mm]: 20
- Item number: R140.42
- Manufacturer: SNR
- EAN number: 3413520320980
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Info: EXPERT KITS +
- for OE number: 3350,25
- not for payload [kg]: 1800
- Packaging height [cm]: 8
- Packaging Depth [cm]: 8
- Item number: V22-1041
- Manufacturer: VAICO
- EAN number: 4046001520266
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Height 1 [mm]: 21,3
- Diameter [mm]: 80
- Weight [kg]: 0,9
- Inner Diameter 2 [mm]: 50
- Packing Type: Box
- Packaging length [cm]: 10,8
- Packaging width [cm]: 9,6
- Packaging height [cm]: 6,5
- Item number: PE-WB-11427
- Manufacturer: MOOG
- EAN number: 4044197611652
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 50
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 80
- Width [mm]: 21,5
- Bearing Type: Tapered Roller Bearing
- Item number: 70 91 2695
- Manufacturer: SWAG
- EAN number: 4044688636201
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 55
- Weight [kg]: 0,48
- Inner Diameter 2 [mm]: 30, 40
- not for payload [kg]: 1800
- Bearing Type: Tapered Roller Bearing
- Width 1 [mm]: 17
- Outer Diameter 2 [mm]: 68
- Item number: 62 91 9295
- Manufacturer: SWAG
- EAN number: 4044688638441
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2