Vehicle identification number: 0035BDQ
Opel Astra J gtc 1.6 CDTI Wheel hub (136 hp Diesel B 16 DTH)
- Fitting Position: Rear Axle both sides
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Thread Size: M12x1,5
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 136, 82,40
- Distance of mounting bores [mm]: 64,8
- Rim Hole Number: 5
- Outer Diameter 2 [mm]: 60,00
- Item number: 654W0978
- Manufacturer: RIDEX
- EAN number: 4059191629909
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Left, Right
- Vehicle Identification Number (VIN) to: B3999999
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Thread Size: M12x1,5
- Hole Spacing 1 / Hole Spacing 2: 5x115
- Diameter [mm]: 146
- Width [mm]: 98
- Bolt Hole Circle Ø [mm]: 115
- Width 2 [mm]: 65,00
- Item number: 654W0572
- Manufacturer: RIDEX
- EAN number: 4059191341597
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Height 1 [mm]: 60
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 136, 86,15
- Weight [kg]: 3,42
- Inner Diameter 2 [mm]: 29
- Distance of mounting bores [mm]: 105
- Rim Hole Number: 5
- Item number: 654W0804
- Manufacturer: RIDEX
- EAN number: 4059191551040
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring, with bolts / screws
- Diameter [mm]: 91,30
- Distance of mounting bores [mm]: 115
- Rim Hole Number: 5
- Width 2 [mm]: 42,00
- Flange Diameter [mm]: 146
- Item number: 654W0635
- Manufacturer: RIDEX
- EAN number: 4059191652143
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 62
- Inner Diameter [mm]: 34
- Diameter [mm]: 146
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-081
- Manufacturer: ABAKUS
- EAN number: 224657208883042088830
- Condition: New
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing
- Bolt Hole Circle Ø [mm]: 105
- Number of Teeth: 30
- Number of Holes: 4
- Diameter [mm]: 136
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Bearing Type: Ball Bearing
- Item number: 614 752 0009
- Manufacturer: MEYLE
- EAN number: 4040074180051
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated magnetic sensor ring
- Bolt Hole Circle Ø [mm]: 116
- Number of Teeth, ABS ring: 96
- Number of Teeth: 30
- Number of Holes: 3
- Diameter [mm]: 146
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Bearing Type: Ball Bearing
- Thread Size: M12x1,75
- Item number: 614 652 0016
- Manufacturer: MEYLE
- EAN number: 4040074269633
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
price incl. 19% VAT
- Fitting Position: Rear Axle
- Weight [kg]: 3,861
- Packaging length [cm]: 13,6
- Packaging width [cm]: 11,8
- Packaging height [cm]: 11,8
- Item number: 1082-J300R
- Manufacturer: FEBEST
- EAN number: 224674167144501671445
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Weight [kg]: 3,77
- Packaging length [cm]: 14,6
- Packaging width [cm]: 14,6
- Packaging height [cm]: 10,8
- Item number: 1082-CRFM
- Manufacturer: FEBEST
- EAN number: 4056111077536
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front axle both sides
- Height [mm]: 79,5
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub
- Bolt Hole Circle Ø [mm]: 50
- Number of Teeth: 33
- Number of Holes: 5
- Weight [kg]: 3,23
- Inner Diameter [mm]: 25,6
- Wheel Hub Diameter [mm]: 56,5
- Diameter [mm]: 136,0
- Drum diameter [mm]: 60
- Item number: 13796
- Manufacturer: FARE SA
- EAN number: 8435392037051
- Condition: New
- Fitting Position: Rear Axle both sides
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Thread Size: M12x1,5
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 136, 82,40
- Distance of mounting bores [mm]: 64,8
- Rim Hole Number: 5
- Outer Diameter 2 [mm]: 60,00
- Item number: SKWB-0181134
- Manufacturer: STARK
- EAN number: 4059191629893
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Weight [kg]: 3,925
- Packaging width [cm]: 13,7
- Packaging height [cm]: 11,8
- Packaging Depth [cm]: 13,5
- Item number: V40-1431
- Manufacturer: VAICO
- EAN number: 4046001684074
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 268
- Item number: 55-OP-110
- Manufacturer: PROCARO
- EAN number: 2505820711481
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Number of Teeth, ABS ring: 58
- Inner Diameter [mm]: 27
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Thread Size: M12X1,5
- Diameter [mm]: 123
- Inner Diameter 2 [mm]: 27
- Rim Hole Number: 4
- Version: One
- Item number: 9227023K
- Manufacturer: GSP
- EAN number: 2237310504191
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 29
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 136
- Number of mounting bores: 5
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-200
- Manufacturer: ABAKUS
- EAN number: 224657230574962305749
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 29
- Height [mm]: 83
- Vehicle Identification Number (VIN) to: B3999999
- Diameter [mm]: 83
- Wheel Diameter [inch]: 15
- Rim Hole Number: 5
- Item number: 20L0018-JPN
- Manufacturer: JPN
- EAN number: 226985177925161779251
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Left, Right
- Vehicle Identification Number (VIN) to: B3999999
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Thread Size: M12x1,5
- Hole Spacing 1 / Hole Spacing 2: 5x115
- Diameter [mm]: 146
- Width [mm]: 98
- Bolt Hole Circle Ø [mm]: 115
- Width 2 [mm]: 65,00
- Item number: SKWB-0180240
- Manufacturer: STARK
- EAN number: 4059191158416
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring, with bolts / screws
- Diameter [mm]: 91,30
- Distance of mounting bores [mm]: 115
- Rim Hole Number: 5
- Width 2 [mm]: 42,00
- Flange Diameter [mm]: 146
- Item number: SKWB-0180759
- Manufacturer: STARK
- EAN number: 4059191450664
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Required quantity: 2
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 146
- Width [mm]: 146,0
- Weight [kg]: 3,618
- for brake disc diameter [mm]: 300, 321
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 62
- Number of Teeth: 30
- Packaging width [cm]: 14,4
- Packaging height [cm]: 10,8
- Packaging Depth [cm]: 14,5
- Item number: V40-1432
- Manufacturer: VAICO
- EAN number: 4046001684081
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 136
- Item number: 110000210
- Manufacturer: AUTOMEGA
- EAN number: 2232388384010
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5