Vehicle identification number: 7107465
MITSUBISHI Lancer Estate (C1_V, C3_V) 1.8 4WD Wheel hub (94 hp Petrol 4G37)
- Fitting Position: Front Axle
- Height [mm]: 50,29
- Height 1 [mm]: 39,88
- Diameter [mm]: 26,99
- Width [mm]: 14,22
- Width 1 [mm]: 13,84
- Diameter 1 [mm]: 17,46
- Item number: CX095
- Manufacturer: CX
- EAN number: 5900613901020
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Production Number: K4104250
- Item number: 4104250
- Manufacturer: KRAFT
- EAN number: 5900427490598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Height [mm]: 65,09
- Diameter [mm]: 38,1
- Width [mm]: 18,03
- Item number: CX150
- Manufacturer: CX
- EAN number: 2503000925628
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Production Number: K4104220
- Item number: 4104220
- Manufacturer: KRAFT
- EAN number: 5900427490604
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories, with Split Pin, with gaskets / seals
- Diameter [mm]: 65
- Inner Diameter 2 [mm]: 38,1
- Width 1 [mm]: 21,1
- Item number: GK1366
- Manufacturer: GSP
- EAN number: 2237311296647
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Construction Year to: 12 / 1990
- for OE number: 51713-21100_kit
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Packaging Depth [cm]: 8
- Item number: A52-0053
- Manufacturer: ACKOJA
- EAN number: 4062375072057
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 38,1
- Diameter [mm]: 65,1
- Width [mm]: 21,1
- Width 2 [mm]: 18,3
- Fabrication Number: KLP-MS-004
- Item number: KLP-MS-004
- Manufacturer: NTY
- EAN number: 5908281425251
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Product line: The Original
- Inner Diameter [mm]: 38
- Diameter [mm]: 65
- Width [mm]: 21
- Inner Diameter 2 [mm]: 38
- Width 2 [mm]: 21
- Outer Diameter 2 [mm]: 65
- Item number: QWB746
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593220416
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Construction Year to: 12 / 1990
- Inner Diameter [mm]: 38,17
- Diameter [mm]: 65
- Width [mm]: 21,12
- Item number: 19-7068
- Manufacturer: METELLI
- EAN number: 8032747414118
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Product line: The Original
- Diameter [mm]: 50,3
- Inner Diameter 2 [mm]: 27, 17,5
- Width 2 [mm]: 14,2
- Width 1 [mm]: 13,8
- Outer Diameter 2 [mm]: 39,9
- Item number: QWB375
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593111707
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 38
- Height 1 [mm]: 21,2
- Construction Year to: 12 / 1990
- Diameter [mm]: 65
- Width [mm]: 18
- Item number: 33-0200
- Manufacturer: MAXGEAR
- EAN number: 5907558532449
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Item number: 713 6191 00
- Manufacturer: FAG
- EAN number: 4014870003104
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 38
- Diameter [mm]: 65
- Width [mm]: 21
- Item number: WM 746
- Manufacturer: METZGER
- EAN number: 4250032423117
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Left, Right, Front Axle
- Inner Diameter [mm]: 38
- Height 1 [mm]: 21
- Diameter [mm]: 65
- Width [mm]: 21
- Inner Diameter 2 [mm]: 38
- Width 2 [mm]: 21
- Outer Diameter 2 [mm]: 65
- Height 2 [mm]: 21
- Item number: H15004BTA
- Manufacturer: BTA
- EAN number: 5900427490604
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Right, Rear Axle Left
- Diameter [mm]: 50
- Inner Diameter 2 [mm]: 26, 17
- Width 2 [mm]: 13
- Width 1 [mm]: 14
- Outer Diameter 2 [mm]: 39
- Item number: R173.00
- Manufacturer: SNR
- EAN number: 3413520326685
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Left, Right, Front Axle
- Height 1 [mm]: 21
- Diameter [mm]: 65
- Inner Diameter 2 [mm]: 38
- Outer Diameter 2 [mm]: 65
- Height 2 [mm]: 21
- Item number: H15004
- Manufacturer: KANACO
- EAN number: 5900427100879
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Height 1 [mm]: 13,843
- Diameter [mm]: 39,9
- Weight [kg]: 0,19
- Inner Diameter 2 [mm]: 17,5, 27
- Outer Diameter 2 [mm]: 50,3
- Height 2 [mm]: 14,224
- Packing Type: Box
- Packaging length [cm]: 10,8
- Packaging width [cm]: 9,6
- Packaging height [cm]: 6,5
- Item number: MI-WB-11789
- Manufacturer: MOOG
- EAN number: 4044197609109
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 38,1
- Diameter [mm]: 65,1
- Width [mm]: 21,1
- Width 2 [mm]: 18,3
- Item number: 951606
- Manufacturer: OPTIMAL
- EAN number: 4031185216067
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Diameter [mm]: 65
- Inner Diameter 2 [mm]: 38
- Width 2 [mm]: 21
- Width 1 [mm]: 21
- Outer Diameter 2 [mm]: 65
- Item number: 713 6191 30
- Manufacturer: FAG
- EAN number: 4014870003135
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: EXPERT KITS +
- for OE number: 30 870 319
- Packaging height [cm]: 9,8
- Packaging Depth [cm]: 9,8
- Item number: V95-0226
- Manufacturer: VAICO
- EAN number: 4046001520860
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4