Ford Ranger EQ 2.3 Wheel hub (155 hp Petrol ZH23HYU)
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 40
- Diameter: 80
- Width [mm]: 19,8
- Width 2 [mm]: 16
- Item number: 654W0755
- Manufacturer: RIDEX
- EAN number: 4059191539024
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Diameter: 52,0
- Inner Diameter 2 [mm]: 25,0, 34,9
- Width 2 [mm]: 18,3
- Width 1 [mm]: 16,3
- Outer Diameter 2 [mm]: 65,1
- Item number: 654W1027
- Manufacturer: RIDEX
- EAN number: 4059191631155
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Required quantity: 2
- Inner Diameter [mm]: 40
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter: 80
- Width [mm]: 19,8
- Item number: VKBA 3950
- Manufacturer: SKF
- EAN number: 7316572495797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: EXPERT KITS +
- Height [mm]: 55
- Suspension: for vehicles with increased ground clearance
- Diameter: 88
- Weight [kg]: 1,666
- Packaging width [cm]: 10,6
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 10,9
- Item number: V25-1820
- Manufacturer: VAICO
- EAN number: 4046001864247
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Left, Rear Axle
- Diameter: 88
- Width 1 [mm]: 55
- Item number: R141.75
- Manufacturer: SNR
- EAN number: 3413521092008
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Diameter: 65,1
- Inner Diameter 2 [mm]: 34,9, 25
- Width 2 [mm]: 16,3
- Width 1 [mm]: 18,3
- Outer Diameter 2 [mm]: 52
- Item number: 713 6153 10
- Manufacturer: FAG
- EAN number: 4014870002084
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Required quantity: 2
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter: 52
- Inner Diameter 2 [mm]: 25, 34,9
- Width 2 [mm]: 18
- Width 1 [mm]: 16,3
- Outer Diameter 2 [mm]: 65,1
- Item number: VKBA 1998
- Manufacturer: SKF
- EAN number: 7316575754846
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Suspension: for vehicles with increased ground clearance
- Inner Diameter [mm]: 47
- Diameter: 88
- Width [mm]: 55
- Item number: 301703
- Manufacturer: OPTIMAL
- EAN number: 4031185274388
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 40
- Diameter: 80
- Width [mm]: 19,8
- Width 2 [mm]: 16
- Item number: 942695
- Manufacturer: OPTIMAL
- EAN number: 4031185226950
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Suspension: for vehicles with increased ground clearance
- Inner Diameter [mm]: 47
- Diameter: 88
- Width [mm]: 55
- Item number: WM 2251
- Manufacturer: METZGER
- EAN number: 4062101127501
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Right, Left, Rear Axle
- Weight [g]: 540
- Item number: R141.70
- Manufacturer: SNR
- EAN number: 3413521092329
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 40
- Diameter: 80
- Width [mm]: 19,8
- Width 2 [mm]: 16
- Item number: 19-2996
- Manufacturer: METELLI
- EAN number: 8032747379011
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Required quantity: 2
- Diameter: 52
- Inner Diameter 2 [mm]: 25, 35
- Width 2 [mm]: 18
- Width 1 [mm]: 15
- Outer Diameter 2 [mm]: 65
- Item number: WBK-4514
- Manufacturer: KAVO PARTS
- EAN number: 8715616077354
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 65
- Inner Diameter 2 [mm]: 35, 25
- Width 2 [mm]: 16
- Width 1 [mm]: 18
- Outer Diameter 2 [mm]: 52
- Item number: 33-1162
- Manufacturer: MAXGEAR
- EAN number: 5903766356181
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 40
- Required quantity: 2
- Diameter: 80
- Width [mm]: 19
- Item number: WBK-4522
- Manufacturer: KAVO PARTS
- EAN number: 8715616167222
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Diameter: 80
- Inner Diameter 2 [mm]: 40
- Width 1 [mm]: 19,8
- Item number: 713 6157 00
- Manufacturer: FAG
- EAN number: 4014870016647
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Suspension: for vehicles without increased ground clearance
- Inner Diameter [mm]: 25
- Diameter: 52, 65,1
- Width [mm]: 16,3
- Inner Diameter 2 [mm]: 34,9
- Width 2 [mm]: 16,3, 18
- Width 1 [mm]: 18
- Item number: 941565
- Manufacturer: OPTIMAL
- EAN number: 4031185215657
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Height 1 [mm]: 18,288
- Diameter: 65,1
- Weight [kg]: 0,47
- Inner Diameter 2 [mm]: 34,9, 25
- Outer Diameter 2 [mm]: 52
- Height 2 [mm]: 16,25
- Packing Type: Box
- Packaging length [cm]: 11
- Packaging width [cm]: 10,4
- Packaging height [cm]: 6,8
- Item number: FD-WB-11856
- Manufacturer: MOOG
- EAN number: 4044197605552
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Suspension: for vehicles without increased ground clearance
- Supplementary Info: EXPERT KITS +
- Diameter: 52
- Width [mm]: 16,0
- Weight [kg]: 0,35
- Inner Diameter 2 [mm]: 25, 20
- Outer Diameter 2 [mm]: 47
- Packaging width [cm]: 10,4
- Packaging height [cm]: 8
- Packaging Depth [cm]: 10,3
- Item number: V25-1726
- Manufacturer: VAICO
- EAN number: 4046001700705
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 65,09
- Inner Diameter 2 [mm]: 34,93, 25,00
- Width 2 [mm]: 16,25
- Width 1 [mm]: 18,29
- Outer Diameter 2 [mm]: 52,00
- Item number: 4082
- Manufacturer: RUVILLE
- EAN number: 4011442100667
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2