Vehicle identification number: 4136014
Fiat Ducato 230L 2.8 JTD 4x4 Wheel hub (128 hp Diesel 8140.43S)
-
- TecDoc Engine Number: 8140.43S
- Payload [kg]: 1800
-
- TecDoc Engine Number: 8140.43S
- Vehicle Identification Number (VIN) from: 6194400
- Payload [kg]: 1800
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: with grease cap, with retaining ring
- Diameter [mm]: 90
- Width [mm]: 60
- Weight [kg]: 1,62
- Item number: 654W0438
- Manufacturer: RIDEX
- EAN number: 4059191160532
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Brake Type: Drum Brake
- Payload [kg]: 1000
- Fitting Position: Front axle both sides
- Height 1 [mm]: 20
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 80
- Weight [kg]: 0,9
- Inner Diameter 2 [mm]: 50
- Item number: 654W0076
- Manufacturer: RIDEX
- EAN number: 4059191321254
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle, Front Axle
- Brake Type: Disc Brake
- Construction Year from: 12 / 2001
- Payload [kg]: 1000, 1400
- Fitting Position: Front axle both sides
- Height 1 [mm]: 48
- Diameter [mm]: 84
- Weight [kg]: 0,58
- Inner Diameter 2 [mm]: 49
- Packing Type: Box
- Item number: 654W0090
- Manufacturer: RIDEX
- EAN number: 4059191321001
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload [kg]: 1800
- Fitting Position: Front axle both sides
- Diameter [mm]: 90
- Inner Diameter 2 [mm]: 55
- Width 2 [mm]: 23
- Item number: 654W0188
- Manufacturer: RIDEX
- EAN number: 4059191164509
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Brake Type: Drum Brake
- Payload [kg]: 1000
- Fitting Position: Front axle both sides
- Height 1 [mm]: 20
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Diameter [mm]: 80
- Weight [kg]: 0,9
- Inner Diameter 2 [mm]: 50
- Item number: SKWB-0180075
- Manufacturer: STARK
- EAN number: 4059191030262
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle, Front Axle
- Brake Type: Disc Brake
- Construction Year from: 12 / 2001
- Payload [kg]: 1000, 1400
- Fitting Position: Front axle both sides
- Height 1 [mm]: 48
- Diameter [mm]: 84
- Weight [kg]: 0,58
- Inner Diameter 2 [mm]: 49
- Packing Type: Box
- Item number: SKWB-0180089
- Manufacturer: STARK
- EAN number: 4059191030408
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 11 / 2001
- Vehicle Identification Number (VIN) from: 6194400
- Fitting Position: Front Axle
- Required quantity: 2
- Payload [kg]: 1000, 1400
- Inner Diameter [mm]: 49
- Diameter [mm]: 84
- Width [mm]: 48
- Item number: VKBA 3640
- Manufacturer: SKF
- EAN number: 7316572180587
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2001
- Vehicle Identification Number (VIN) to: 6194399
- Fitting Position: Front Axle, Rear Axle
- Required quantity: 2
- Payload [kg]: 1000, 1400
- Inner Diameter [mm]: 50
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 80
- Width [mm]: 20
- Item number: VKBA 1444
- Manufacturer: SKF
- EAN number: 7316575753641
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 12 / 2001
- Payload [kg]: 1800
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Height [mm]: 99,5
- Outer Diameter 2 [mm]: 77,9
- Diameter [mm]: 55
- Item number: 653W0079
- Manufacturer: RIDEX
- EAN number: 4059191647446
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 12 / 2001
- Payload to [kg]: 1400
- Fitting Position: Front axle both sides
- Rim Hole Number: 5
- Height [mm]: 101
- Distance of mounting bores [mm]: 118
- Internal Toothing wheel side: 28
- Diameter [mm]: 49,0 / 73,0
- Internal Thread [mm]: M14 x 1,5
- Item number: 653W0138
- Manufacturer: RIDEX
- EAN number: 4059191744985
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Right, Left, Front Axle
- Diameter [mm]: 84
- Inner Diameter 2 [mm]: 49
- Width 1 [mm]: 48
- Tightening Torque [Nm]: 450
- Item number: R140.17
- Manufacturer: SNR
- EAN number: 3413520549862
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right
- Vehicle configuration line / variant: >Ch 6194400
- Inner Diameter [mm]: 50,00
- Inner Diameter 2 [mm]: 50
- Number of mounting bores: 1
- Width 2 [mm]: 80
- Width 1 [mm]: 20,00
- Number of bolts / screws: 0,0
- Item number: KWD1263
- Manufacturer: DAYCO
- EAN number: 8021787342550
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake Type: Drum Brake
-
- Fitting Position: Front Axle
- Payload [kg]: 1000, 1400
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Supplementary Info: ORIGINAL Quality
- Height 1 [mm]: 22
- Diameter [mm]: 80
- Inner Diameter 2 [mm]: 50
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 2 [mm]: 80
- Height 2 [mm]: 22
- Item number: 11-14 033 5029/S
- Manufacturer: MEYLE
- EAN number: 4040074401743
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 11 / 2001
- Vehicle Identification Number (VIN) from: 6194400
- Fitting Position: Front Axle
- Required quantity: 2
- Payload [kg]: 1800
- Inner Diameter [mm]: 55
- Diameter [mm]: 90
- Width [mm]: 60
- Item number: VKBA 3641
- Manufacturer: SKF
- EAN number: 7316572180594
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 2001
- Payload [kg]: 1000, 1400
-
- Fitting Position: Rear Axle
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle
- Inner Diameter [mm]: 50
- Diameter [mm]: 80
- Width [mm]: 20,0
- Weight [kg]: 0,976
- Width 2 [mm]: 20
- Packaging width [cm]: 8
- Packaging height [cm]: 8
- Packaging Depth [cm]: 8
- Item number: V42-0061
- Manufacturer: VAICO
- EAN number: 4046001371608
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info: with axle nut
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 49
- Construction Year from: 11 / 2001
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- for OE number: 16 063 750 80
- Diameter [mm]: 84
- Width [mm]: 48
- Weight [kg]: 1,000
- Bearing Type: Tapered Roller Bearing
- Item number: 24519
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816245193
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2001
- Vehicle Identification Number (VIN) to: 6194399
- Fitting Position: Front Axle
- Required quantity: 2
- Payload [kg]: 1800
- Inner Diameter [mm]: 55,0
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 90,0
- Width [mm]: 23,0
- Item number: VKBA 3428
- Manufacturer: SKF
- EAN number: 7316577648839
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 12 / 2001
- Payload [kg]: 1000, 1400
-
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Supplementary Info: EXPERT KITS +
- Inner Diameter [mm]: 49
- for OE number: 3326,62
- Diameter [mm]: 84
- Width [mm]: 48,0
- Weight [kg]: 1,344
- Packaging width [cm]: 9,6
- Packaging height [cm]: 9,8
- Packaging Depth [cm]: 9,8
- Item number: V22-1031
- Manufacturer: VAICO
- EAN number: 4046001520129
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: 8140.43S
- Payload [kg]: 1800
-
- TecDoc Engine Number: 8140.43S
- Vehicle Identification Number (VIN) from: 6194400
- Payload [kg]: 1800
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: with grease cap, with retaining ring
- Diameter [mm]: 90
- Width [mm]: 60
- Weight [kg]: 1,62
- Item number: SKWB-0180573
- Manufacturer: STARK
- EAN number: 4059191091898
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Front Axle
- Inner Diameter [mm]: 50
- Supplementary Article / Supplementary Info Info 2: with shaft seal
- Diameter [mm]: 80
- Width [mm]: 21,5
- Weight [kg]: 0,85
- Bearing Type: Tapered Roller Bearing
- Item number: 12695
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816126959
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5