Vehicle identification number: 1727AHZ
FIAT Doblo II Platform/Chassis (263) 2.0 D Multijet Wheel hub (135 hp Diesel 263 A1.000)
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 74
- Width [mm]: 37
- Item number: 654W0465
- Manufacturer: RIDEX
- EAN number: 4059191160679
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 37
- Diameter [mm]: 72,04
- Width [mm]: 37
- Item number: 654W0081
- Manufacturer: RIDEX
- EAN number: 4059191159369
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Payload: for increased payload
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 42
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 82,5
- Width [mm]: 37
- Item number: 654W0594
- Manufacturer: RIDEX
- EAN number: 4059191173235
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Payload: not for increased payload
- Fitting Position: Rear Axle both sides
- Height [mm]: 61
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Diameter [mm]: 61
- Packing Type: Box
- Item number: 654W1355
- Manufacturer: RIDEX
- EAN number: 4066423457636
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: 263 A1.000
- Fitting Position: Front Axle
- Payload: for increased payload
-
- TecDoc Engine Number: 263 A1.000
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 98
- Number of Holes: 5
- Weight [kg]: 1,3
- Thickness [mm]: 70
- Outer Diameter 2 [mm]: 59
- Diameter [mm]: 116, 42
- for OE number: 60510369
- Item number: 40232
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816402329
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- TecDoc Engine Number: 263 A1.000
- Fitting Position: Front Axle
- Payload: for increased payload
-
- TecDoc Engine Number: 263 A1.000
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 98
- Number of Holes: 5
- Weight [kg]: 1,3
- Thickness [mm]: 70
- Outer Diameter 2 [mm]: 59
- Diameter [mm]: 116, 42
- Item number: 70 94 0232
- Manufacturer: SWAG
- EAN number: 4044688582249
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Item number: FT24056
- Manufacturer: FAST
- EAN number: 224938160073771600737
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated magnetic sensor ring
- Bolt Hole Circle Ø [mm]: 98
- Number of Teeth, ABS ring: 96
- Number of Holes: 5
- Diameter [mm]: 120
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Bearing Type: Ball Bearing
- Item number: 214 752 0005
- Manufacturer: MEYLE
- EAN number: 4040074301227
- Condition: New
With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle Left, Rear Axle Right
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with grease cap, with nut, with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub
- Bolt Hole Circle Ø [mm]: 98
- Quantity per axle: 2
- Diameter [mm]: 120
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Item number: 634 169
- Manufacturer: TOPRAN
- EAN number: 1369330000012
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Height [mm]: 69,5
- Number of Teeth: 27
- Weight [g]: 1320
- for wheel bearing diameter [mm]: 42
- Shore-A hardness value, base body: 34
- Item number: 17770
- Manufacturer: VEMA
- EAN number: 2244259085252
- Condition: New
- Fitting Position: Rear Axle both sides
- Height [mm]: 71
- Number of Holes: 5
- Weight [g]: 1920
- for wheel bearing diameter [mm]: 30
- Material: Steel
- Internal Thread 1 [mm]: M 12X1,25
- Hub Profile: GHIERA MAGNETICA
- Item number: 190011
- Manufacturer: VEMA
- EAN number: 224425147820581478205
- Condition: New
- Fitting Position: Front Axle
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 72
- Width [mm]: 37
- Weight [kg]: 0,76
- Always compare old and new part (in particular OE No.)
- Item number: 85SKV067
- Manufacturer: ESEN SKV
- EAN number: 5906302252688
- Condition: New
price incl. 19% VAT
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 74
- Width [mm]: 37
- Item number: SKWB-0180600
- Manufacturer: STARK
- EAN number: 4059191092260
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 37
- Diameter [mm]: 72,04
- Width [mm]: 37
- Item number: SKWB-0180080
- Manufacturer: STARK
- EAN number: 4059191030316
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 72
- Width [mm]: 37,0
- Weight [kg]: 0,754
- Packaging width [cm]: 10,6
- Packaging height [cm]: 8
- Packaging Depth [cm]: 10,6
- Item number: V24-0657
- Manufacturer: VAICO
- EAN number: 4046001710148
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Diameter [mm]: 74
- Width [mm]: 37
- Item number: LO 03598
- Manufacturer: STARLINE
- EAN number: 221136211619864116198
- Condition: New
price incl. 19% VAT
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle
- for OE number: 71 745 047
- Braking / Drive Dynamics: for vehicles with ABS
- Weight [kg]: 0,823
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Item number: V24-0233
- Manufacturer: VAICO
- EAN number: 4046001519017
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Supplementary Article / Supplementary Info: with axle nut
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with retaining ring, with nut
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 72
- Width [mm]: 37
- Weight [kg]: 0,69
- Bearing Type: Angular Ball Bearing
- Item number: 37015
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816370154
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- for OE number: 71 729 125
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 74
- Weight [kg]: 0,763
- Payload: not for increased payload
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Item number: V24-0238
- Manufacturer: VAICO
- EAN number: 4046001519062
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Payload: not for increased payload
- Number of Teeth, ABS ring: 96
- Inner Diameter [mm]: 37
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 74
- Width [mm]: 37
- Net weight [kg]: 0,79
- Gross Weight [kg]: 0,8
- Item number: 3598-SET-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083954431
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5