Vehicle identification number: 0591334
Audi 80 B2 2.2 quattro Wheel hub (136 hp Petrol KK)
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 42,00
- Supplementary Article / Supplementary Info Info 2: Contains two wheel bearing sets
- Thread Size: M24x1,5
- Diameter [mm]: 75,00
- Width [mm]: 37,00
- Item number: 654W1117
- Manufacturer: RIDEX
- EAN number: 4059191857210
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 17,46, 29
- Supplementary Article / Supplementary Info Info 2: Contains two wheel bearing sets
- Diameter [mm]: 39,88, 50,29
- Width [mm]: 14,61, 14,73
- Item number: 654W0637
- Manufacturer: RIDEX
- EAN number: 4059191706600
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 41,8
- Thread Size: M24x1,5
- Diameter [mm]: 75,0
- Width [mm]: 37,0
- Item number: 654W0046P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448815487
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle both sides, Front axle both sides
- Height 1 [mm]: 37
- Diameter [mm]: 75
- Weight [kg]: 0,7
- Inner Diameter 2 [mm]: 42
- Item number: 654W0101
- Manufacturer: RIDEX
- EAN number: 4059191165452
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 42,00
- Supplementary Article / Supplementary Info Info 2: Contains two wheel bearing sets
- Thread Size: M24x1,5
- Diameter [mm]: 75,00
- Width [mm]: 37,00
- Item number: SKWB-0181289
- Manufacturer: STARK
- EAN number: 4059191857203
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 17,46, 29
- Supplementary Article / Supplementary Info Info 2: Contains two wheel bearing sets
- Diameter [mm]: 39,88, 50,29
- Width [mm]: 14,61, 14,73
- Item number: SKWB-0180761
- Manufacturer: STARK
- EAN number: 4059191450688
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- for OE number: 823 407 615 A
- Item number: 07.30.031
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081261320
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- TecDoc Engine Number: KK
-
- TecDoc Engine Number: KK
- Vehicle Identification Number (VIN) to: ******85*D*200000
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 39
- Number of Holes: 4
- Weight [kg]: 1,28
- Diameter [mm]: 39
- Item number: 02231
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816022312
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 76
- Number of Holes: 4
- Diameter [mm]: 120,5
- for wheel bearing diameter [mm]: 39
- Net weight [kg]: 1,36
- Gross Weight [kg]: 1,40
- Item number: 4P105-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083196626
- Condition: New
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 108
- Number of Holes: 4
- Diameter [mm]: 42
- Item number: 03493
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816034933
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Left, Rear Axle Right
- Rim Hole Number: 4
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Number of Holes: 4
- Brake Type: Disc Brake
- Item number: 1141402000
- Manufacturer: JP GROUP
- EAN number: 5710412148188
- Condition: New
- Fitting Position: Rear Axle
- Required quantity: 2
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Number of Teeth: 26
- Diameter [mm]: 42
- Item number: 26725
- Manufacturer: MAPCO
- EAN number: 4043605035318
- Condition: New
- Fitting Position: Rear Axle
- Height [mm]: 109
- Diameter 2 [mm]: 29
- Fabrication Number: KLT-VW-000P3
- Item number: KLT-VW-000P3
- Manufacturer: NTY
- EAN number: 5908281482841
- Condition: New
- Fitting Position: Rear Axle, Front Axle
- Rim Hole Number: 4
- Height [mm]: 73,5
- Bolt Hole Circle Ø [mm]: 108
- Number of Holes: 4
- Internal Toothing wheel side: 26
- Diameter [mm]: 42,0 / 68,0, 42, 68
- Inner Diameter 2 [mm]: 108
- Item number: H5A004BTA
- Manufacturer: BTA
- EAN number: 5900427448254
- Condition: New
- Fitting Position: Rear Axle, Front Axle
- Supplementary Info: Original VAICO Quality
- Weight [kg]: 1,6419
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Item number: V10-7189
- Manufacturer: VAICO
- EAN number: 4046001279942
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
-
- TecDoc Engine Number: KK
- Required quantity: 2
- Vehicle Identification Number (VIN) to: 85-D-200000
-
- TecDoc Engine Number: KK
- Vehicle Identification Number (VIN) to: 85-D-200 000
- Supplementary Info: Original VAICO Quality
- Bolt Hole Circle Ø [mm]: 100
- Weight [kg]: 1,3419
- Diameter [mm]: 39
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Item number: V10-1395
- Manufacturer: VAICO
- EAN number: 4046001261831
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Number of Holes: 4
- Brake Type: Disc Brake
- Item number: 1141401000
- Manufacturer: JP GROUP
- EAN number: 5710412178239
- Condition: New
- Fitting Position: Front Axle
- TecDoc Engine Number: KK
-
- TecDoc Engine Number: KK
- Vehicle Identification Number (VIN) to: ******85*D*200000
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 39
- Number of Holes: 4
- Weight [kg]: 1,28
- Diameter [mm]: 39
- Item number: 32 90 2231
- Manufacturer: SWAG
- EAN number: 4044688022318
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 108
- Number of Holes: 4
- Weight [kg]: 1,58
- Diameter [mm]: 42
- Item number: 32 90 3493
- Manufacturer: SWAG
- EAN number: 4044688034939
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle, Front Axle
- Height [mm]: 74
- Weight [kg]: 1,3
- Weight [g]: 1400
- Item number: 10-1085
- Manufacturer: IJS GROUP
- EAN number: 22117314939902493990
- Condition: New
- 1
- 2
- 3
- 4
- 5