Vehicle identification number: 0035100
Opel Zafira B 1.6 Wheel bearing (105 hp Petrol Z 16 XEP)
- Fitting Position: Rear Axle, Rear Axle both sides
- Thread Size: M12x1,5
- Diameter 2 [mm]: 65,50
- Wheel Hub Diameter [mm]: 140,00
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Width 2 [mm]: 78,00
- Centering Diameter [mm]: 60,00
- Item number: 654W0416
- Manufacturer: RIDEX
- EAN number: 4059191157228
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with bolts / screws
- Diameter [mm]: 137
- Inner Diameter 2 [mm]: 29
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Number of Teeth on input shaft: 33
- Item number: 654W0060
- Manufacturer: RIDEX
- EAN number: 4059191321018
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle both sides
- Thread Size: M12x1,5
- Diameter 2 [mm]: 65,50
- Wheel Hub Diameter [mm]: 140,00
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Width 2 [mm]: 78,00
- Centering Diameter [mm]: 60,00
- Item number: SKWB-0180551
- Manufacturer: STARK
- EAN number: 4059191091546
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with bolts / screws
- Diameter [mm]: 137
- Inner Diameter 2 [mm]: 29
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Number of Teeth on input shaft: 33
- Item number: SKWB-0180059
- Manufacturer: STARK
- EAN number: 4059191030125
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 25
- Diameter [mm]: 137
- Bolt Hole Circle Ø [mm]: 105
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-009
- Manufacturer: ABAKUS
- EAN number: 224657208882322088823
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Left, Right, Front Axle, Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with integrated ABS sensor, with splash protection cover
- Fabrication Number: KLP-PL-014
- Item number: KLP-PL-014
- Manufacturer: NTY
- EAN number: 5908281439364
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Flange Diameter [mm]: 140
- Net weight [kg]: 3,63
- Gross Weight [kg]: 3,86
- Item number: 3653-SET-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083955872
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Inner Diameter [mm]: 27
- Vehicle Identification Number (VIN) from: 6G019310, 62034696
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Diameter [mm]: 137
- Width [mm]: 85,0
- Weight [kg]: 3,215
- Number of Holes: 5
- Rim Hole Number: 5
- Packaging width [cm]: 13,7
- Packaging height [cm]: 12,9
- Item number: V40-1043
- Manufacturer: VAICO
- EAN number: 4046001624490
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Inner Diameter [mm]: 25
- Vehicle Identification Number (VIN) to: 6G-019309
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Thread Size: M22
- Diameter [mm]: 137
- Weight [kg]: 3,603
- Fastening Type: 3-point attachment
- Bolt Hole Circle Ø [mm]: 105
- Rim Hole Number: 5
- Bearing Type: Angular Ball Bearing
- Number of flange connections: 3
- Packaging width [cm]: 16,4
- Packaging height [cm]: 12,1
- Item number: V40-0540
- Manufacturer: VAICO
- EAN number: 4046001340345
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Rim Hole Number: 5
- Production Number: 4101740
- Item number: 4101740
- Manufacturer: KRAFT
- EAN number: 5900427472198
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Rim Hole Number: 5
- Production Number: 4101735
- Item number: 4101735
- Manufacturer: KRAFT
- EAN number: 5900427472761
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 31
- Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 105
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-042
- Manufacturer: ABAKUS
- EAN number: 224657208882652088826
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 25,0
- Diameter [mm]: 137,0
- Width [mm]: 95,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Rim Hole Number: 5
- Number of connectors: 2
- Item number: 10L9018-JPN
- Manufacturer: JPN
- EAN number: 226985177907381779073
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Flange Diameter [mm]: 137
- Item number: 112706
- Manufacturer: DACO Germany
- EAN number: 4260646556590
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 96
- Height 1 [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Thread Size: M12 x 1.5
- Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 110
- Rim Hole Number: 5
- Outer Diameter 2 [mm]: 60
- Item number: 20L9099-JPN
- Manufacturer: JPN
- EAN number: 226985229630502296305
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Number of Teeth: 33
- Flange Diameter [mm]: 137
- Net weight [kg]: 3,40
- Gross Weight [kg]: 3,54
- Item number: 3651-SET-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083954288
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 33
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 137
- Weight [kg]: 3,59
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 105
- Always compare old and new part (in particular OE No.)
- Item number: 29SKV019
- Manufacturer: ESEN SKV
- EAN number: 5901947342923
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with groove
- Item number: GT24-048
- Manufacturer: GT-BERGMANN
- EAN number: GT24-048
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with nut, with RPM sensor, with studs, Wheel Bearing integrated into wheel hub
- Diameter [mm]: 140
- not for country specific design: Turkey
- Quantity per axle: 2
- Fastening Type: Four-point attachment
- Bolt Hole Circle Ø [mm]: 105
- Rim Hole Number: 5
- Number of pins: 2
- Connector Shape: oval
- Item number: 207 395
- Manufacturer: TOPRAN
- EAN number: 6043160000019
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
-
- Vehicle configuration line / variant: REAR LR+RE LR+RE, REAR LR+RE
- for OE number: 93178626
- Inner Diameter [mm]: 0,0
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 4
- Diameter 2 [mm]: 1
- Number of mounting bores: 1
- Width 1 [mm]: 100,0
- Item number: KWD1051
- Manufacturer: DAYCO
- EAN number: 8021787340433
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5