Opel Astra L48 1.8 Wheel bearing (140 hp Petrol Z 18 XER)
- Fitting Position: Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with bolts / screws
- Diameter [mm]: 137
- Inner Diameter 2 [mm]: 29
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Number of Teeth on input shaft: 33
- Item number: 654W0060
- Manufacturer: RIDEX
- EAN number: 4059191321018
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 136,0
- Rim Hole Number: 4
- Bearing Type: Angular Ball Bearing
- Item number: 654W0378
- Manufacturer: RIDEX
- EAN number: 4059191646913
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle both sides
- Thread Size: M12x1,5
- Diameter 2 [mm]: 65,50
- Wheel Hub Diameter [mm]: 140,00
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Width 2 [mm]: 78,00
- Centering Diameter [mm]: 60,00
- Item number: 654W0416
- Manufacturer: RIDEX
- EAN number: 4059191157228
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 25
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with grease cap, with bolts / screws, with nut, with wheel hub
- Diameter [mm]: 137
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Item number: 52704
- Manufacturer: AIC
- EAN number: 4046283527045
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with bolts / screws
- Diameter [mm]: 137
- Inner Diameter 2 [mm]: 29
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Number of Teeth on input shaft: 33
- Item number: SKWB-0180059
- Manufacturer: STARK
- EAN number: 4059191030125
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Weight [kg]: 3,925
- Packaging width [cm]: 13,7
- Packaging height [cm]: 11,8
- Packaging Depth [cm]: 13,5
- Item number: V40-1431
- Manufacturer: VAICO
- EAN number: 4046001684074
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with integrated ABS sensor, with splash protection cover
- Fabrication Number: KLP-PL-014
- Item number: KLP-PL-014
- Manufacturer: NTY
- EAN number: 5908281439364
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Right
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with integrated ABS sensor
- Fabrication Number: KLP-PL-013
- Item number: KLP-PL-013
- Manufacturer: NTY
- EAN number: 5908281439357
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle both sides
- Thread Size: M12x1,5
- Diameter 2 [mm]: 65,50
- Wheel Hub Diameter [mm]: 140,00
- Distance of mounting bores [mm]: 110
- Rim Hole Number: 5
- Width 2 [mm]: 78,00
- Centering Diameter [mm]: 60,00
- Item number: SKWB-0180551
- Manufacturer: STARK
- EAN number: 4059191091546
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
-
- Rim Hole Number: 4
- Required quantity: 2
- Supplementary Article / Supplementary Info: with lock nut
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Item number: GT24-126
- Manufacturer: GT-BERGMANN
- EAN number: GT24-126
- Condition: New
price incl. 19% VAT
excl. delivery costs


- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 34
- Supplementary Article / Supplementary Info Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring
- Diameter [mm]: 146
- Width [mm]: 146
- Thickness [mm]: 110
- Weight [kg]: 3,58
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 62
- for POC: J17, J60
- Bearing Type: Angular Ball Bearing
- Item number: GT24-195
- Manufacturer: GT-BERGMANN
- EAN number: 5907764529950
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 31
- Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 105
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-042
- Manufacturer: ABAKUS
- EAN number: 224657208882652088826
- Condition: New
price incl. 19% VAT
excl. delivery costs

- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Flange Diameter [mm]: 137
- Item number: 112706
- Manufacturer: DACO Germany
- EAN number: 4260646556590
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Right
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with wheel studs
- Fabrication Number: KLT-PL-023
- Item number: KLT-PL-023
- Manufacturer: NTY
- EAN number: 5908281435656
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Required quantity: 2
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 146
- Width [mm]: 146,0
- Weight [kg]: 3,618
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 62
- for POC: J17, J60
- Number of Teeth: 30
- Packaging width [cm]: 14,4
- Packaging height [cm]: 10,8
- Packaging Depth [cm]: 14,5
- Item number: V40-1432
- Manufacturer: VAICO
- EAN number: 4046001684081
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 119,20, 85,00
- Rim Hole Number: 4
- Width 2 [mm]: 39,00
- Outer Diameter 2 [mm]: 60,00
- Item number: 10L9061-JPN
- Manufacturer: JPN
- EAN number: 226985177907811779078
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor, with groove
- Item number: GT24-048
- Manufacturer: GT-BERGMANN
- EAN number: GT24-048
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 25
- Diameter [mm]: 137
- Bolt Hole Circle Ø [mm]: 105
- Assy. / disassy. by qualified personnel required!
- Item number: 141-01-009
- Manufacturer: ABAKUS
- EAN number: 224657208882322088823
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Right
- Supplementary Article / Supplementary Info Info 2: with wheel hub, with wheel studs
- Fabrication Number: KLT-PL-024
- Item number: KLT-PL-024
- Manufacturer: NTY
- EAN number: 5908281435663
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
-
- Vehicle configuration line / variant: FRONT LR+FR LR+FR, FRONT LR+FR
- for OE number: 93178651
- Inner Diameter [mm]: 25,0
- Supplementary Article / Supplementary Info Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Width 1 [mm]: 81,0
- Number of bolts / screws: 7,0
- Item number: KWD1144
- Manufacturer: DAYCO
- EAN number: 8021787341362
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5