BMW 4 Coupe (F32, F82) 435 d xDrive (230 kW / 313 hp) 2013
Vehicle identification number: 0005BTA
Vehicle identification number: 0005BTA
BMW F32 435d xDrive 3.0 Water pump + timing belt kit (313 hp Diesel N57 D30 B)
1 items
VAICO V20-50102-BEK Water pump and timing belt kit with tensioner arm, tensioner pulley, with gaskets/seals, with water pump, with bolts/screws, with belt, with thermostat L: 2143 mm
Article number: V20-50102-BEK
Submit a review
- Supplementary Article / Supplementary Info: with tensioner arm, tensioner pulley, with gaskets / seals, with water pump
- Length [mm]: 2143
- Number of belts: 1
- Pulleys contained: 3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with belt, with thermostat
- Housing Type: with housing
- Opening Temperature [°C]: 87
- Pulleys: with V-ribbed belt pulley
- Operating Mode: Mechanical
- Number of ribs: 6
- Braking / Drive Dynamics: for vehicles with dynamic drive
- Housing material: Plastic
- Item number: V20-50102-BEK
- Our price: 414,55 €
- Manufacturer: VAICO
- EAN number: 4062375210473
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
Get a bonus of 1,04 € when you purchase this product
You will receive 1,04 € in your bonus account if you buy this product:
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
Free delivery on this item
In stock
-22%
compared to
RRP 536,92 €
414,55 €
price incl. 19% VAT
BMW 4 Coupe (F32, F82) 435 d xDrive Bestsellers
ZIMMERMANN COAT Z 150.2904.20 Brake disc Rear Axle, 330x20mm, 6/5, 5x120, internally vented
Article number: 150.2904.20
Reviews - 2
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 66
- Surface: Coated
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Weight [kg]: 7,8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Inner brake drum diameter [mm]: 185
- Drilled: no
- Item number: 150.2904.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238755012
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-46%
compared to
RRP 115,39 €
61,94 €
Price per item
price incl. 19% VAT
excl. delivery costs
REMSA 1493.00 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: 1493.00
Reviews - 1
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories, with spring
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Length [mm]: 123,8, 123,1
- Height [mm]: 59,1
- Height 2 [mm]: 57,3
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Item number: 1493.00
- Our price: 29,58 €
- Manufacturer: REMSA
- EAN number: 8427975034441
- Condition: New
Show OEM numbers of the product
Details
NK 221559 Brake pad set Rear Axle, excl. wear warning contact
Article number: 221559
Submit a review
-
- Fitting Position: Rear Axle
- Brake System: Standard
- for brake disc diameter [mm]: 330
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 57,3
- Height 2 [mm]: 58,9
- Width 2 [mm]: 123,6
- Width 1 [mm]: 123
- Thickness 1 [mm]: 16,4
- Thickness 2 [mm]: 16,4
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Warning Contact Length [mm]: 672
- Net weight [kg]: 1,31
- Item number: 221559
- Our price: 79,90 €
- Manufacturer: NK
- EAN number: 5703858889753
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 1)
-36%
compared to
RRP 124,95 €
79,90 €
price incl. 19% VAT
FEBI BILSTEIN 16867 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: 16867
Reviews - 5
-
- Braking System: for vehicles without M-sport brakes
- for brake disc diameter [mm]: 330
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 123,8, 123,1
- Width [mm]: 59,1, 57,3
- Thickness 1 [mm]: 17,3
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,165
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Observe service information
- Item number: 16867
- Our price: 36,64 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816168676
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
ABE C2B028ABE Brake pad set Rear Axle, not prepared for wear warning indicator
Article number: C2B028ABE
Submit a review
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Height 1 [mm]: 57,3
- Height [mm]: 59,1
- Height 2 [mm]: 59,1
- Width [mm]: 123,8
- Width 2 [mm]: 123,8
- Width 1 [mm]: 123,1
- Manufacturer Restriction: ATE
- Item number: C2B028ABE
- Our price: 43,79 €
- Manufacturer: ABE
- EAN number: 5900427193000
- Condition: New
Show OEM numbers of the product
Details
ABE C3B045ABE Brake disc Front Axle, 300x22mm, 5, Vented
Article number: C3B045ABE
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 73
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Drilled: no
- Item number: C3B045ABE
- Manufacturer: ABE
- EAN number: 5900427199071
- Condition: New
Show OEM numbers of the product
Details
TRW GDB1943 Brake pad set DTEC COTEC, Front Axle, prepared for wear warning indicator
Article number: GDB1943
Reviews - 6
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 18,3
- Supplementary Info: DTEC COTEC
- Quantity Unit: Axle Set
- Height [mm]: 91,4
- Width [mm]: 114,5
- Test Mark: E9 90R-02A0107 / 3232
- Manufacturer Restriction: BREMBO
- Item number: GDB1943
- Our price: 54,15 €
- Manufacturer: TRW
- EAN number: 3322938147303
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 479 622 Brake disc Rear Axle, 330x20mm, 5x120, Vented
Article number: 0 986 479 622
Reviews - 2
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 66,2
- Surface: Coated
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,6
- Drilled: no
- Item number: 0 986 479 622
- Manufacturer: BOSCH
- EAN number: 4047025167772
- Condition: New
Show OEM numbers of the product
Details
In stock
-66%
compared to
RRP 155,89 €
52,77 €
Price per item
price incl. 19% VAT
excl. delivery costs
DELPHI LP2494 Brake pad set Rear Axle, not prepared for wear warning indicator
Article number: LP2494
Submit a review
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- not for special equipment code: S2NHA
- for article number: LX0643
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 58,7
- Height 2 [mm]: 56,9
- Width 2 [mm]: 123,1
- Width 1 [mm]: 123,8
- Thickness 1 [mm]: 17,2
- Thickness 2 [mm]: 17,2
- WVA Number: 25514, 25515
- Test Mark: E9 90R-02A0825 / 3219
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1610-8823
- Friction Lining Material: Semi-Metallic
- Item number: LP2494
- Our price: 33,12 €
- Manufacturer: DELPHI
- EAN number: 5012759503089
- Condition: New
Show OEM numbers of the product
Additional information
2 plain pads, 2 pads + spring clips
Details
TRW GDB2031 Brake pad set Front Axle, prepared for wear warning indicator
Article number: GDB2031
Reviews - 7
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with sports package
- Vehicle Equipment 2: for vehicles with M-sport package
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 18,5
- Quantity Unit: Axle Set
- Height [mm]: 91,4
- Width [mm]: 114,5
- Test Mark: E990R-02A0107 / 3232Ex
- Manufacturer Restriction: BREMBO
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Item number: GDB2031
- Our price: 52,01 €
- Manufacturer: TRW
- EAN number: 3322938218829
- Condition: New
Show OEM numbers of the product
Details
TRW DF6512S Brake disc Rear Axle, 330x20mm, 5x120, Vented
Article number: DF6512S
Reviews - 4
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 66,2
- Surface: Painted
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Colour: black
- Drilled: no
- Item number: DF6512S
- Manufacturer: TRW
- EAN number: 3322938210779
- Condition: New
Show OEM numbers of the product
Details
In stock
-69%
compared to
RRP 168,44 €
51,26 €
Price per item
price incl. 19% VAT
excl. delivery costs
TRW GDB1937 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: GDB1937
Submit a review
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Length [mm]: 123,1, 123,8
- Height 1 [mm]: 57,3
- Height 2 [mm]: 59,1
- Test Mark: E9 90R - 01120 / 3219
- Manufacturer Restriction: ATE
- Item number: GDB1937
- Our price: 44,94 €
- Manufacturer: TRW
- EAN number: 3322938142490
- Condition: New
Show OEM numbers of the product
Details
DELPHI LP2449 Brake pad set Front Axle, prepared for wear warning indicator
Article number: LP2449
Submit a review
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 340, 370
- Braking System: for vehicles with M-sport brakes, for vehicles with M-performance brakes
- for special equipment code: P337A, S2NHA
-
- Fitting Position: Front Axle
- Braking System: for vehicles with a standard brake system
- for brake disc diameter [mm]: 340
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 91,3
- Height 2 [mm]: 91,3
- Width 2 [mm]: 112,9
- Width 1 [mm]: 112,9
- Thickness 1 [mm]: 17,9
- Thickness 2 [mm]: 17,9
- WVA Number: 25028
- Test Mark: E9 90R-02A0841 / 3232
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1609-8822 D1880-882
- Friction Lining Material: Low-Metallic
- Item number: LP2449
- Our price: 51,89 €
- Manufacturer: DELPHI
- EAN number: 5012759493212
- Condition: New
Show OEM numbers of the product
Additional information
4 identical pads
Details
In stock (Item(s) left: 4)
-74%
compared to
RRP 199,72 €
51,89 €
price incl. 19% VAT
excl. delivery costs
VALEO 601288 Brake pad set Front Axle, without integrated wear sensor
Article number: 601288
Reviews - 2
-
- Construction Year from: 03 / 2017
- Construction Year to: 05 / 2020
- Fitting Position: Front Axle
- Brake System: BOSCH
- Wear Warning Contact: without integrated wear sensor
- Thickness [mm]: 19,2
- Quantity Unit: Axle Set
- Height [mm]: 70
- Width [mm]: 148
- WVA Number: 25200
- Test Mark: ECE-R90
- Weight [kg]: 2,025
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: 601288
- Our price: 51,01 €
- Manufacturer: VALEO
- EAN number: 3276426012881
- Condition: New
Show OEM numbers of the product
Additional information
1923-2023: 100 years of braking
Details
In stock (Item(s) left: 1)
-73%
compared to
RRP 195,53 €
51,01 €
price incl. 19% VAT
excl. delivery costs
REMSA 1491.00 Brake pad set Front Axle, prepared for wear warning indicator
Article number: 1491.00
Reviews - 2
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 18,3
- Quantity Unit: Axle Set
- Length [mm]: 114,5
- Height [mm]: 91,4
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Item number: 1491.00
- Our price: 38,99 €
- Manufacturer: REMSA
- EAN number: 8427975034519
- Condition: New
Show OEM numbers of the product
Details
ZIMMERMANN COAT Z 150.2903.20 Brake disc Front Axle, 340x30mm, 6/5, 5x120, internally vented
Article number: 150.2903.20
Reviews - 6
-
- Fitting Position: Front Axle
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Weight [kg]: 10,9
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2903.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238755272
- Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-60%
compared to
RRP 219,02 €
86,17 €
Price per item
price incl. 19% VAT
excl. delivery costs
BREMBO P 06 072 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: P 06 072
Reviews - 16
-
- Fitting Position: Rear Axle
- Suspension: for vehicles without M technology
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height 1 [mm]: 57
- Height 2 [mm]: 59
- Width 2 [mm]: 123
- Width 1 [mm]: 124
- WVA Number: 25514, 25515
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Item number: P 06 072
- Our price: 42,04 €
- Manufacturer: BREMBO
- EAN number: 8020584083789
- Condition: New
Show OEM numbers of the product
Details
DELPHI LP2660 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: LP2660
Reviews - 1
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Braking System: for vehicles with M-performance brakes
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Braking System: for vehicles with M-performance brakes
- for article number: LX0703
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- for special equipment code: S2NHA
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 88
- Height 2 [mm]: 88
- Width 2 [mm]: 72,1
- Width 1 [mm]: 72,1
- Thickness 1 [mm]: 16,8
- Thickness 2 [mm]: 16,8
- WVA Number: 25029
- Test Mark: E9 90R-02A0841 / 3857
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1656-8885
- Friction Lining Material: Low-Metallic
- Item number: LP2660
- Our price: 40,48 €
- Manufacturer: DELPHI
- EAN number: 5012759507469
- Condition: New
Show OEM numbers of the product
Additional information
4 identical pads
Details
In stock (Item(s) left: 3)
-73%
compared to
RRP 155,43 €
40,48 €
price incl. 19% VAT
excl. delivery costs
TRW COTEC GDB2028 Brake pad set Rear Axle, prepared for wear warning indicator
Article number: GDB2028
Reviews - 7
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 17,8
- Product line: COTEC
- Quantity Unit: Axle Set
- Height [mm]: 65,8
- Width [mm]: 73,6
- Test Mark: E9 90R-02A0120 / 3583
- Manufacturer Restriction: BREMBO
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Item number: GDB2028
- Our price: 45,48 €
- Manufacturer: TRW
- EAN number: 3322938218492
- Condition: New
Show OEM numbers of the product
Details
Find the best offers on