Porsche 997 Convertible 3.8 Turbo S Water pump, headlight cleaning (530 hp Petrol MA1.70)
- Voltage [V]: 12
- Fitting Position: Front
- Pump Type: Diaphragm Pump
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without check control system
- Number of pins: 2
- Packaging Depth [cm]: 12
- Item number: 794W0005
- Our price: 6,80 €
- Manufacturer: RIDEX
- EAN number: 4059191586714
- Condition: New
- Voltage [V]: 12
- Fitting Position: Front
- Pump Type: Diaphragm Pump
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without check control system
- Number of pins: 2
- Packaging Depth [cm]: 12
- Item number: SKWPC-1810004
- Our price: 6,59 €
- Manufacturer: STARK
- EAN number: 4059191586707
- Condition: New
- Product line: Original Quality
- Voltage [V]: 12
- Fitting Position: Front
- Pump Type: Diaphragm Pump
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without check control system
- Length [mm]: 35,4
- Width [mm]: 47
- Height [mm]: 113,7
- Packaging width [cm]: 5
- Packaging height [cm]: 3,6
- Packaging Depth [cm]: 12
- Item number: V10-08-0203
- Our price: 18,90 €
- Manufacturer: VEMO
- EAN number: 4046001285509
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Product line: Original Quality
- Voltage [V]: 12
- Operating Mode: Electric
- Number of pins: 2
- Weight [kg]: 0,09
- Packaging width [cm]: 5
- Packaging height [cm]: 3,6
- Packaging Depth [cm]: 12
- Item number: V20-08-0378
- Our price: 25,79 €
- Manufacturer: VEMO
- EAN number: 4046001286827
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
- Supplementary Article / Supplementary Info Info 2: for headlamp cleaning system
- Operating Mode: Electric
- Item number: QWP040
- Our price: 45,38 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438435641
- Condition: New
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Rear Axle Right
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 75,0
- Surface: Coated
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- paired article number: 24.0128-0197.1
- Bore Diameter [mm]: 15,4
- Drilled: yes
- Item number: 24.0128-0196.1
- Manufacturer: ATE
- EAN number: 4006633302074
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Right
- Braking System: for vehicles without ceramic brakes
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Brake Disc Thickness [mm]: 34,0
- Height [mm]: 69,5
- Surface: Coated
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 32,0
- Inner Diameter [mm]: 173,5
- Machining: Alloyed / High-carbon
- MAPP code available
- paired article number: 24.0134-0101.1
- Bore Diameter [mm]: 15,4
- Drilled: yes
- Item number: 24.0134-0102.1
- Manufacturer: ATE
- EAN number: 4006633301879
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking System: for vehicles with ceramic brakes
- Material: Low-Metallic
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Height [mm]: 90,3
- Width [mm]: 121,3
- WVA Number: 23329
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474593, 1987474556
- Observe technical data
- Item number: 0 986 494 281
- Our price: 49,79 €
- Manufacturer: BOSCH
- EAN number: 4047024645349
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 01 / 2011
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 16,2
- Product line: PREMIER
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 78
- Width [mm]: 114
- WVA Number: 21937
- Test Mark: R90 Homologated
- Weight [kg]: 1,81
- Article number of recommended accessories: FWI384, FWI420
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 16,764
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,826
- Item number: FDB1307
- Our price: 47,66 €
- Manufacturer: FERODO
- EAN number: 5016687156676
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 17
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 90,3
- Width [mm]: 121,3
- WVA Number: 23329
- Test Mark: R90 Homologated
- Weight [kg]: 2,14
- Article number of recommended accessories: FWI384, FWI405
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 20,32
- Packaging width [cm]: 12,446
- Packaging height [cm]: 7,874
- Item number: FDB1742
- Our price: 54,33 €
- Manufacturer: FERODO
- EAN number: 5016687350579
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 01 / 2011
- Braking System: for vehicles with ceramic brakes
- Equipment Code: I450
- for individual equipment ID: I450
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 90,3
- Height 2 [mm]: 90,3
- Width 2 [mm]: 125,1
- Width 1 [mm]: 125,1
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- WVA Number: 23329
- Test Mark: E9 90R-02A0841 / 1054
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D917-7798
- Friction Lining Material: Low-Metallic
- Item number: LP1996
- Our price: 29,87 €
- Manufacturer: DELPHI
- EAN number: 5012759406410
- Condition: New
4 identical pads
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 140,2
- Width [mm]: 89
- Thickness 1 [mm]: 16,8
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,16
- Braking System: for vehicles without ceramic brakes
- Observe service information
- Item number: 16752
- Our price: 40,41 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167525
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: BREMBO
- Wear Warning Contact: excl. wear warning contact, prepared for wear warning indicator
- Thickness [mm]: 17
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Height [mm]: 86
- Width [mm]: 121,0
- Weight [kg]: 2,073
- Braking System: for vehicles without ceramic brakes
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V45-0022
- Our price: 88,94 €
- Manufacturer: VAICO
- EAN number: 4046001470516
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 86,0
- Width [mm]: 121,0
- Test Mark: E1 90R-011216 / 1048
- MAPP code available
- Article number of recommended accessories: 24.8190-0024.2, 24.8190-0025.2, 24.8190-0938.2, 24.8190-0943.2
- Observe dimensions
- Item number: 13.0460-4842.2
- Our price: 78,94 €
- Manufacturer: ATE
- EAN number: 4006633320269
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Rear Axle Left
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 75,0
- Surface: Coated
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- paired article number: 24.0128-0196.1
- Bore Diameter [mm]: 15,4
- Drilled: yes
- Item number: 24.0128-0197.1
- Manufacturer: ATE
- EAN number: 4006633302135
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left
- Braking System: for vehicles without ceramic brakes
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Brake Disc Thickness [mm]: 34,0
- Height [mm]: 69,5
- Surface: Coated
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 32,0
- Inner Diameter [mm]: 173,5
- Machining: Alloyed / High-carbon
- MAPP code available
- paired article number: 24.0134-0102.1
- Bore Diameter [mm]: 15,4
- Drilled: yes
- Item number: 24.0134-0101.1
- Manufacturer: ATE
- EAN number: 4006633301817
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 01 / 2011
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 78
- Height [mm]: 78
- Width [mm]: 114
- WVA Number: 21937
- Test Mark: R90 Homologated
- Weight [kg]: 1,81
- Article number of recommended accessories: FWI256, FWI384, FWI420
- Packing Type: Box
- Number of springs: 4
- Packaging length [cm]: 16,8
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,7
- Item number: 573043J
- Our price: 41,23 €
- Manufacturer: JURID
- EAN number: 3306437015172
- Condition: New
-
- Fitting Position: Rear Axle
- Brake Caliper Type: Aluminium Brake Caliper
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 16,7
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Width [mm]: 130,6
- WVA Number: 24154
- Test Mark: R90 Homologated
- Weight [kg]: 1,809
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Article number of recommended accessories: FWI383
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 15,8
- Packaging width [cm]: 9
- Packaging height [cm]: 8,8
- Item number: FDB4211
- Our price: 133,92 €
- Manufacturer: FERODO
- EAN number: 4044197480838
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Front Axle
- Braking System: for vehicles without ceramic brakes
-
- Fitting Position: Front Axle
- Construction Year to: 12 / 2010
- Braking System: for vehicles with ceramic brakes
- Equipment Code: I450
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Height 1 [mm]: 99
- Height 2 [mm]: 99
- Width 2 [mm]: 190,3
- Width 1 [mm]: 190,3
- Thickness 1 [mm]: 16,6
- Thickness 2 [mm]: 16,6
- WVA Number: 24641
- Test Mark: E1 90R-011041 / 1719
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D1431-8548
- Friction Lining Material: Low-Metallic
- Item number: LP2232
- Our price: 67,29 €
- Manufacturer: DELPHI
- EAN number: 5012759455814
- Condition: New
4 identical pads
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Length [mm]: 121,3
- Height [mm]: 90,5
- Weight [kg]: 2,5
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Item number: 0982.00
- Our price: 41,20 €
- Manufacturer: REMSA
- EAN number: 8427975022790
- Condition: New